Welded crank question

  • dman3998
  • dman3998's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 143
  • Thanks: 0

Welded crank question

15 Apr 2009 17:30
#282077
After the crank is welded, there is NO changing of the rods correct?

So do you put in new rods before you weld or is that not a big deal.

Or is the real question for regular normal street/highway cruising is it not any advantage to weld the crank anyway.

just trying to add to the knowledge base in the old noodle.
Dman

SE Idaho

"Smart only goes just so far, STUPID is UN-limited"

79 KZ1000 LTD
Honda XRL650L
Yamaha RD350B
Yamaha DT400B

Please Log in or Create an account to join the conversation.

  • timebomb33
  • timebomb33's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 4277
  • Thanks: 10

Re: Welded crank question

15 Apr 2009 18:16
#282090
stock kawi rods and bearings are really tough if your building a hotrod street bike or a small inch dragb ike the normal procedure is to make sure the crank is true the roods bearings are in good shape then you weld the pins to the flywheels so the crank can not twist under heavy loads if you need to replace a rod or bearing you just grind the weld down and press the crank apart normally unless your going to a big inch dragbike you just weld up the stock crank that came in your engine and go have fun.
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE

Please Log in or Create an account to join the conversation.

  • RonKZ650
  • RonKZ650's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 3719
  • Thanks: 252

Re: Welded crank question

15 Apr 2009 18:52
#282098
You mean to tell me the crank is pressed together and after welding the rods cannot be unbolted. In other words no rod caps? I never knew this after 30 yrs of ownership. :laugh: No more KZ1000s for me, I'll stay with the 650s. :)
321,000 miles on KZ's that I can remember. Not going to see any more.

Please Log in or Create an account to join the conversation.

  • StreetfighterKz
  • StreetfighterKz's Avatar
  • Away
  • User
  • User
    Registered
  • Posts: 1672
  • Thanks: 250

Re: Welded crank question

15 Apr 2009 18:59
#282100
RonKZ650 wrote:
You mean to tell me the crank is pressed together and after welding the rods cannot be unbolted. In other words no rod caps?

Yup, one piece rods.

Dman,

If your bike is stock and you're doing just street/highway riding with the occasional trip to the track then you don't really have a reason to weld the crank. If you have to split the cases for another reason then go ahead and have the crank welded so it'll be ready for future upgrades. Make sense?:huh:

Later, Doug
1978 z1000 Streetfighter
1976 z900 ‘Stripfighter
1978 z1000 w/RC Turbo
1979 z650 Resto-Mod
1983 Gpz750 Resto-Mod
2018 Z900RS

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum