Running on bad rings

  • thadley55
  • thadley55's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • TWO WEEKS!!!(Money Pit the movie)
  • Posts: 78
  • Thanks: 0

Running on bad rings

19 Apr 2009 22:41
#283256
I have a 76 KZ900 and last year I did a diagnostic to see if the rings were bad and sure enough they are. So would it hurt the bike to run on bad rings for a season? I have heard things about dropping valves or over compressing them or something? What is this and is it a danger?
ThanxB)
1975 XL125 Honda first bike
1993? VTR 250 Honda gone
1983 LTD 440 Yammy gone
1988 CBR 600 Honda gladly gone!!
1976 KZ900 daily driver

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: Running on bad rings

19 Apr 2009 23:33 - 19 Apr 2009 23:34
#283264
If the hot compression is within service manual specs, you can run it.
1979 KZ-750 Twin
Last edit: 19 Apr 2009 23:34 by bountyhunter.

Please Log in or Create an account to join the conversation.

  • thadley55
  • thadley55's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • TWO WEEKS!!!(Money Pit the movie)
  • Posts: 78
  • Thanks: 0

Re: Running on bad rings

20 Apr 2009 06:45
#283284
Thanks for the advice, where in the service manual would I find those numbers? I looked in the index but didn't find compression anywhere, don't see it on the spec sheet, and I can't find it posted near ring replacement? Maybe I overlooked it but it is always good to get advice from someone who has put their eyes on it already.
ThanxB)
1975 XL125 Honda first bike
1993? VTR 250 Honda gone
1983 LTD 440 Yammy gone
1988 CBR 600 Honda gladly gone!!
1976 KZ900 daily driver

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: Running on bad rings

20 Apr 2009 14:21
#283373
In my 750 twin FSM, it is in the chapter called "Maintenance-Engine". For mine, the nominal compression is 156psi and service limit is 115 psi.
1979 KZ-750 Twin

Please Log in or Create an account to join the conversation.

  • thadley55
  • thadley55's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • TWO WEEKS!!!(Money Pit the movie)
  • Posts: 78
  • Thanks: 0

Re: Running on bad rings

20 Apr 2009 21:16
#283508
I'll check it out thanksB)
1975 XL125 Honda first bike
1993? VTR 250 Honda gone
1983 LTD 440 Yammy gone
1988 CBR 600 Honda gladly gone!!
1976 KZ900 daily driver

Please Log in or Create an account to join the conversation.

  • timebomb33
  • timebomb33's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 4277
  • Thanks: 10

Re: Running on bad rings

20 Apr 2009 22:55 - 20 Apr 2009 22:56
#283535
is the engine smoking badly if it's not run it and keep a good eye on your oil consumption if it goes up drasticly then park it. by the way how did you figure that you had bad rings.
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE
Last edit: 20 Apr 2009 22:56 by timebomb33.

Please Log in or Create an account to join the conversation.

  • roy-b-boy-b
  • roy-b-boy-b's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 3245
  • Thanks: 103

Re: Running on bad rings

21 Apr 2009 02:21
#283584
I would get a bottle of ring free from your local yamaha shop and give it a couple of treatments and that will tell you if the rings are stuck. I use this product on a lot of machines that have been sitting. Great product.

It will clean up your upper engine. Be sure to change the oil after the shock treatment. Roy
1979 LTD Street Fighter.1977 KZ1000

Please Log in or Create an account to join the conversation.

  • donthekawguy
  • donthekawguy's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1911
  • Thanks: 8

Re: Running on bad rings

21 Apr 2009 03:43
#283591
Once the compression gets below 115-120 you will start having plug founling problems. Mine was down to 110 in all four and I would foul plugs no matter how lean in about an hour of riding.
Rathdrum Idaho
1971 Kawasaki g3ss
1972 Yamaha R5 350
1965 Suzuki Hillbilly
1964 Yamaha 125

Please Log in or Create an account to join the conversation.

  • Old Man Rock
  • Old Man Rock's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6071
  • Thanks: 225

Re: Running on bad rings

21 Apr 2009 04:09
#283597
by the way how did you figure that you had bad rings.
... I'm with TB on this, was wondering the same...

Smoking, pinging/ringing sound (broken rings) in one or all cylinders, fouled plugs, no running power, metal shavings in oil, extremely low compression measurements etc....

Compression test for sure and if possible leak down test.

Me personally, if the rings are truly damaged, why the hell would you run this old girl is beyond me. :blink:

Example, pinging/ringing sounds in the cylinders normally equates to broken rings. These rings start busting up in your cylinders and shread the cylinder walls (sleeves) kiss the cylinder goodbye... Time for a bore job, most probably sleeves as well. Then there's the damage to the pistons/head/valves...

Now because you just wanted to ride the summer you're out a couple of grand in repairs... :ohmy:

Now you have metal shavings in your lower end so now you have to split the cases to get them out... See where this is going?

All in all, just not worth it... Or is it... Follow the others guidance, test if truly damaged, open her up, visually inspect the cylinder walls, measure the ring end gaps, find out if they're broken, inspect your pistons etc...
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter

Phoenix, Az

Please Log in or Create an account to join the conversation.

  • thadley55
  • thadley55's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • TWO WEEKS!!!(Money Pit the movie)
  • Posts: 78
  • Thanks: 0

Re: Running on bad rings

22 Apr 2009 09:08
#284037
I did the water test on the pipes and found I had a dead cyl, after I checked valve clearances I did a comp. test ad had low compression. Then to check and see if it was rings or valves I poured a teaspoon of oil down the cyl. and sure enough the numbers went up drastically. These were all things I posted last year, thanks for all the good advice. I have decided to take the plunge and do them. I am going to start a new thread asking if there are any KZR's in DFW. I need to know a respectable shop around here that will take care of me. I need head work and the cans checked and honed. ThanxB)
1975 XL125 Honda first bike
1993? VTR 250 Honda gone
1983 LTD 440 Yammy gone
1988 CBR 600 Honda gladly gone!!
1976 KZ900 daily driver

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum