MK11 cams

mark1122
Topic Author
Offline
User
Registered
Keep twisting it
Posts: 5297
Thanks: 109

MK11 cams

25 Apr 2009 01:24

when installing the cams and chain for timming, is the pin count the same ase the kz's? 28th pin.

76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.

~ ~ ~_@
~ ~ _- \,
~ (k) / (z)

Please Log in or Create an account to join the conversation.

Mcdroid
Offline
Sustaining Member
Registered
Gone Kwackers
Posts: 6908
Thanks: 530

Re: MK11 cams

25 Apr 2009 02:21

#285037

According to the Kawasaki shop manual (99924-1006-05), yes

Michael
Victoria, Texas

1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A

Please Log in or Create an account to join the conversation.

mark1122
Topic Author
Offline
User
Registered
Keep twisting it
Posts: 5297
Thanks: 109

Re: MK11 cams

25 Apr 2009 16:15

#285226

Thanks man.

76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.

~ ~ ~_@
~ ~ _- \,
~ (k) / (z)

Please Log in or Create an account to join the conversation.

timebomb33
Offline
User
Registered
Posts: 4277
Thanks: 10

Re: MK11 cams

25 Apr 2009 19:35

#285255

mark do you have the 16 pin mark11 crank in your bike now.

1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE

Please Log in or Create an account to join the conversation.

kaw74z1
Offline
User
Registered
0 to 60 in 15 minutes.
Posts: 115
Thanks: 0

Re: MK11 cams

25 Apr 2009 21:19

#285270

28th pin is what I put mine on.

Its a 79 MKII with stock crank motor fired rite up;) ...Now I have more problems:woohoo:

1974 Z1 with a MKII And a 1105 big bore kit 10.5 to 1 comp. Andrews 2x cams ported head dyna s with green coils V&H sidewinder pipe airshifter 4in.over arm

Please Log in or Create an account to join the conversation.

timebomb33
Offline
User
Registered
Posts: 4277
Thanks: 10

Re: MK11 cams

25 Apr 2009 21:23

#285272

what do you mean more problems?

1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE

Please Log in or Create an account to join the conversation.

kaw74z1
Offline
User
Registered
0 to 60 in 15 minutes.
Posts: 115
Thanks: 0

Re: MK11 cams

25 Apr 2009 21:36

#285274

My CC seal was leaking so I pulled the trans door off and found a stress crack in my shifter boss

1974 Z1 with a MKII And a 1105 big bore kit 10.5 to 1 comp. Andrews 2x cams ported head dyna s with green coils V&H sidewinder pipe airshifter 4in.over arm

Please Log in or Create an account to join the conversation.

mark1122
Topic Author
Offline
User
Registered
Keep twisting it
Posts: 5297
Thanks: 109

Re: MK11 cams

25 Apr 2009 21:47

#285279

Yes i have a 16 tooth mkl1 crank and mk11 cam gears.
Just needed to verify pin count.

kaw74z1 My CC seal was leaking so I pulled the trans door off and found a stress crack in my shifter boss

what is a cc seal,and shifter boss?

76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.

~ ~ ~_@
~ ~ _- \,
~ (k) / (z)

Please Log in or Create an account to join the conversation.

kaw74z1
Offline
User
Registered
0 to 60 in 15 minutes.
Posts: 115
Thanks: 0

Re: MK11 cams

25 Apr 2009 21:56

#285283

counter shaft seal is what I meant by CC Sorry. And the shifter boss is inside the trans. door where their is a hole that the shift shaft slides into.

1974 Z1 with a MKII And a 1105 big bore kit 10.5 to 1 comp. Andrews 2x cams ported head dyna s with green coils V&H sidewinder pipe airshifter 4in.over arm

Please Log in or Create an account to join the conversation.

mark1122
Topic Author
Offline
User
Registered
Keep twisting it
Posts: 5297
Thanks: 109

Re: MK11 cams

26 Apr 2009 02:59

#285335

the hole in the case that the end of the shifter fits into is cracked?

76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.

~ ~ ~_@
~ ~ _- \,
~ (k) / (z)

Please Log in or Create an account to join the conversation.

kaw74z1
Offline
User
Registered
0 to 60 in 15 minutes.
Posts: 115
Thanks: 0

Re: MK11 cams

26 Apr 2009 13:18

#285416

Yep Mark it's cracked.

1974 Z1 with a MKII And a 1105 big bore kit 10.5 to 1 comp. Andrews 2x cams ported head dyna s with green coils V&H sidewinder pipe airshifter 4in.over arm

Please Log in or Create an account to join the conversation.

mark1122
Topic Author
Offline
User
Registered
Keep twisting it
Posts: 5297
Thanks: 109

Re: MK11 cams

27 Apr 2009 07:52

#285657

So whats the plan,weld,or new cases?

76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.

~ ~ ~_@
~ ~ _- \,
~ (k) / (z)

Please Log in or Create an account to join the conversation.