Valve seals on 76 900LTD

  • PairOfZ1s
  • PairOfZ1s's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 4
  • Thanks: 0

Valve seals on 76 900LTD

03 May 2009 08:33 - 03 May 2009 08:39
#287440
Hi Folks,
I have a 76 900 LTD that had been sitting for about 25 years. I got it running last year, and this year it smokes when I start it. It appears it needs valve seals. I'm not a rookie at these bikes as I've had a 75 Z1 since 76. I do most of the work myself, tune ups, carb sinq, brake work etc, but I haven't had to replace seals before. My question is, do I have to take the head off to replace the seals, or can I pressurize the cylinder to remove the springs retainers, etc, and replace the seal, or would I be wasting my time trying to do it that way?
This bike only has 5000 miles on it. Is it possible to bring the old seals back to life with a chemical additive?
Brian
PairOfZ1s
Last edit: 03 May 2009 08:39 by PairOfZ1s. Reason: Add Picture

Please Log in or Create an account to join the conversation.

  • Mcdroid
  • Mcdroid's Avatar
  • Offline
  • Sustaining Member
  • Sustaining Member
    Registered
  • Gone Kwackers
  • Posts: 6909
  • Thanks: 530

Re: Valve seals on 76 900LTD

03 May 2009 08:42
#287441
Hello Brian:

Beg, borrow, or steal a valve spring compressor tool. With that tool, it is fairly simple. BUT, while you have the top end apart, you may take a look at all those rubber bits the have to do with cam chain adjusters/etc. I suspect you'll find they need to be replaced also. And no, it is not possible to breathe new life into old rubber. :)
Michael
Victoria, Texas

1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A

Please Log in or Create an account to join the conversation.

  • PairOfZ1s
  • PairOfZ1s's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 4
  • Thanks: 0

Re: Valve seals on 76 900LTD

03 May 2009 08:55
#287443
Hi Mike,
Thanks for the reply. The other rubber you referring to is in the cam chain roller assembly?
I didn't think there really was a magic potion for bringing rubber back to life, but I thought I'd ask, or hope.
Any idea where to get the valve sprint compressor?

Please Log in or Create an account to join the conversation.

  • Mcdroid
  • Mcdroid's Avatar
  • Offline
  • Sustaining Member
  • Sustaining Member
    Registered
  • Gone Kwackers
  • Posts: 6909
  • Thanks: 530

Re: Valve seals on 76 900LTD

03 May 2009 09:02
#287444
Well, search this forum and there will be threads on how to build one...if you are particularly handy and have access to welders, etc. I am not overly handy nor do I have a well stocked garage. I tend to buy my tools :laugh:

Try this, it doesn't get much less expensive.

cgi.ebay.com/ebaymotors/Valve-Spring-Com...fPartsQ5fAccessories
Michael
Victoria, Texas

1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A

Please Log in or Create an account to join the conversation.

  • PairOfZ1s
  • PairOfZ1s's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 4
  • Thanks: 0

Re: Valve seals on 76 900LTD

03 May 2009 09:06
#287447
I looked at the valve compressor on ebay, the price doesn't bother me. Would that tool work without taking the head off? Thanks

Please Log in or Create an account to join the conversation.

  • Mcdroid
  • Mcdroid's Avatar
  • Offline
  • Sustaining Member
  • Sustaining Member
    Registered
  • Gone Kwackers
  • Posts: 6909
  • Thanks: 530

Re: Valve seals on 76 900LTD

03 May 2009 09:14
#287448
PairOfZ1s wrote:
I looked at the valve compressor on ebay, the price doesn't bother me. Would that tool work without taking the head off? Thanks

No, you must pull the head.
Michael
Victoria, Texas

1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A

Please Log in or Create an account to join the conversation.

  • PairOfZ1s
  • PairOfZ1s's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 4
  • Thanks: 0

Re: Valve seals on 76 900LTD

03 May 2009 09:31
#287449
Hi Mike,
Thanks I just read more posts from others about attempting to change the seals without removing the head, and I come up with the same answer from everyone. Don't bother trying, removing the head is the easiest part. I 'll look into the valve compressor and take the head off, instead of screwing around. Thanks for your help.
Brian

Please Log in or Create an account to join the conversation.

  • timebomb33
  • timebomb33's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 4277
  • Thanks: 10

Re: Valve seals on 76 900LTD

03 May 2009 11:31
#287480
good choice and when you have the valves out and are ready to remove the valve seals get a set of hose pliers they will make you life alot easir pulling the old valve seals out i think the ones i use are 3/8's they do a great job of grabbing them and alow you to pull them out easy.
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: Valve seals on 76 900LTD

03 May 2009 11:49
#287487
Mcdroid wrote:
...take a look at all those rubber bits the have to do with cam chain adjusters/etc. I suspect you'll find they need to be replaced also....

Valve stem seals and other cam chain related parts (especially the rubber and part-rubber items) may be found at Z1E.

Click here for the valve stem seals

Good Luck! :)
1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum