KZ1000 Valve clearances

  • Pro_window78
  • Pro_window78's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 85
  • Thanks: 0

KZ1000 Valve clearances

07 May 2009 18:06
#288890
I have a 78 kz1000 and I just measured my valve clearances. My number 2 cylinder on the exhaust side has under .05 and my intake side is tight on the .05mm feeler gauge. The rest are all between .05 and .08. My question is, what size shims do I need? How do I tell what size is in there? Thanks

Please Log in or Create an account to join the conversation.

  • Old Man Rock
  • Old Man Rock's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6071
  • Thanks: 225

Re: KZ1000 Valve clearances

07 May 2009 20:23
#288943
Normal protocol, the under side of the shim has the shim number size stamped on them.... If in doubt, use a caliper and measure the shims thickness....

You want between .05 to .1mm....

OMR
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter

Phoenix, Az

Please Log in or Create an account to join the conversation.

  • Old Man Rock
  • Old Man Rock's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6071
  • Thanks: 225

Re: KZ1000 Valve clearances

07 May 2009 20:25
#288944
Almost forgot.... Out of my KZ900 shop manual... should work the same...
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter

Phoenix, Az

Please Log in or Create an account to join the conversation.

  • Pro_window78
  • Pro_window78's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 85
  • Thanks: 0

Re: KZ1000 Valve clearances

08 May 2009 06:58
#289020
Awesome!! Thanks a ton!!

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum