clutch questions
- Davestradamus
-
Topic Author
- Offline
- User
-

Registered
- Posts: 38
- Thanks: 0
clutch questions
01 Jun 2009 20:19
i have just put the first 100 miles on my 1977 kz650b after a long time off the road. after letting the motor cool, when starting with the clutch lever squeezed the bike moved forward. i released the clutch lever and squeezed it again. i put the bike in neutral and started it. i drove home with little problem (aside from a small intermittent miss that concerns me a bit). The same problem returned when i arrived home.
possible problems:
clutch cable too loose/tight?
warn clutch plate?
need oil change?
gas in crank case?
any help would be great!
thanks!
david
possible problems:
clutch cable too loose/tight?
warn clutch plate?
need oil change?
gas in crank case?
any help would be great!
thanks!
david
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: clutch questions
01 Jun 2009 20:31 - 01 Jun 2009 20:32
If you haven't done so over the past year, I would definitely change the oil & filter and lube & adjust the clutch cable. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Last edit: 01 Jun 2009 20:32 by 650ed.
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: clutch questions
01 Jun 2009 20:48
Davestradamus wrote:
I think most bikes with a wet clutch do this to some degree. Put it in neutral before you start it, don't leave it in gear and pull in the clutch.i have just put the first 100 miles on my 1977 kz650b after a long time off the road. after letting the motor cool, when starting with the clutch lever squeezed the bike moved forward.
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
- trianglelaguna
-
- Offline
- User
-

Registered
- New and improved - extra strength
- Posts: 8019
- Thanks: 236
Re: clutch questions
01 Jun 2009 20:58
ditto....would not hurt to follow the manual and start at the motors clutch adjuster then cable then bar nut.....but nuetral is the way to go....good luck...oil changes are cool anyway...bountyhunter wrote:
Davestradamus wrote:I think most bikes with a wet clutch do this to some degree. Put it in neutral before you start it, don't leave it in gear and pull in the clutch.i have just put the first 100 miles on my 1977 kz650b after a long time off the road. after letting the motor cool, when starting with the clutch lever squeezed the bike moved forward.
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
