Engine Holes
- ironpan65
-
Topic Author
- Offline
- User
-

Registered
- *UNTOLD*
- Posts: 32
- Thanks: 0
Engine Holes
06 Jun 2009 11:14
I have a 73 Z1 900 engine that has two holes that have been drilled and capped or plugged on the Lower Front engine case below the barrels...approx half inch in diameter
Can anyone tell me what or why this was done?
Can anyone tell me what or why this was done?
UNTOLD
Please Log in or Create an account to join the conversation.
- gane
-
- Offline
- User
-

Registered
- Posts: 706
- Thanks: 1
Please Log in or Create an account to join the conversation.
- ironpan65
-
Topic Author
- Offline
- User
-

Registered
- *UNTOLD*
- Posts: 32
- Thanks: 0
- ironpan65
-
Topic Author
- Offline
- User
-

Registered
- *UNTOLD*
- Posts: 32
- Thanks: 0
- odl666
-
- Offline
- User
-

Registered
- Posts: 149
- Thanks: 0
Re: Engine Holes
06 Jun 2009 21:40
oil cooler?
1978 kz 650b with gpz faq mods cams carbs polished and ported
1979 gs750e
1972 bsa lightning under construction
1979 gs750e
1972 bsa lightning under construction
Please Log in or Create an account to join the conversation.
- kaw74z1
-
- Offline
- User
-

Registered
- 0 to 60 in 15 minutes.
- Posts: 115
- Thanks: 0
Re: Engine Holes
06 Jun 2009 21:51
I have never seen that before :S,But they did a good job :laugh:
1974 Z1 with a MKII And a 1105 big bore kit 10.5 to 1 comp. Andrews 2x cams ported head dyna s with green coils V&H sidewinder pipe airshifter 4in.over arm
Please Log in or Create an account to join the conversation.
- MFolks
-
- Offline
- User
-

Registered
- Posts: 6650
- Thanks: 541
Re: Engine Holes
06 Jun 2009 21:55
On most bikes with oil coolers, the lines start on the back side of the engine with both pressure and return lines starting and ending around the oil pressure switch housing.
I suppose it's possible to drill and tap for lines on the front of the engine but you'd need to know where in the oil gallery to drill and thread.
I suppose it's possible to drill and tap for lines on the front of the engine but you'd need to know where in the oil gallery to drill and thread.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Please Log in or Create an account to join the conversation.
- timebomb33
-
- Offline
- User
-

Registered
- Posts: 4277
- Thanks: 10
Re: Engine Holes
06 Jun 2009 22:36
it couldn't be for an oil cooler there would be no pressure there it just goes into the cases . i'm stumped i can't for the life of me figure why they would have done that
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE
I THINK MY POWERBAND BROKE
Please Log in or Create an account to join the conversation.
- Skyman
-
- Offline
- User
-

Registered
- 1978 KZ1000-B2 LTD 1982 KZ1000-M2 CSR
- Posts: 912
- Thanks: 3
Re: Engine Holes
07 Jun 2009 01:07
Maybe they're "speed holes". :blink:
:silly: :laugh:
:silly: :laugh:
West Linn, OR
Please Log in or Create an account to join the conversation.
- gane
-
- Offline
- User
-

Registered
- Posts: 706
- Thanks: 1
Re: Engine Holes
07 Jun 2009 19:47
Ironpan, Sorry still clueless. even if there was an oil gallery there, there would be no presure difference for a cooler. mounting anything directly behind exhaust would be self defeating. still, clean work G
[img][/img] 1977 KZ1000A1
Please Log in or Create an account to join the conversation.
- ironpan65
-
Topic Author
- Offline
- User
-

Registered
- *UNTOLD*
- Posts: 32
- Thanks: 0
Re: Engine Holes
08 Jun 2009 17:30
OK,,,,,,,,,thanks for looking
Could there have been a Turbo application to dump oil back into the case....??
It has been suggested to me to replug so that it is flush with case :ohmy:
Could there have been a Turbo application to dump oil back into the case....??
It has been suggested to me to replug so that it is flush with case :ohmy:
UNTOLD
Please Log in or Create an account to join the conversation.
- roy-b-boy-b
-
- Offline
- User
-

Registered
- Posts: 3245
- Thanks: 103
Re: Engine Holes
08 Jun 2009 19:07
I would leave the there and some day someone will walk up and say"i did my bike just like that when i ,yadda yadda yadda.
1979 LTD Street Fighter.1977 KZ1000
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
