NEED INFO IMMEDIATELY CALL ME
- shannonbeau
-
Topic Author
- Offline
- User
-

Registered
- It's my first bike. 82 KZ 1100a
- Posts: 111
- Thanks: 1
NEED INFO IMMEDIATELY CALL ME
12 Jun 2009 17:44
URGENT!!!!!!!
I am putting the top end of my 82 KZ1100 back together in the shop now for a ride on Monday.
I have a single peice head gasket but the diagram shows an o-ring on the top of the cylinder. I don't have that o-ring. Does the single peice gasket take care of that as apposed to a 2 peice gasket.
If you have any knowledge on this subject, please call me immediately,.
319-361-7777 . This is URGENT.....
I am putting the top end of my 82 KZ1100 back together in the shop now for a ride on Monday.
I have a single peice head gasket but the diagram shows an o-ring on the top of the cylinder. I don't have that o-ring. Does the single peice gasket take care of that as apposed to a 2 peice gasket.
If you have any knowledge on this subject, please call me immediately,.
319-361-7777 . This is URGENT.....
Just got an 82 KZ 1100, working to fix it up as my first bike.
Please Log in or Create an account to join the conversation.
- Tony
-
- Offline
- KZr Legend
-

Author
- Posts: 1287
- Thanks: 13
Re: NEED INFO IMMEDIATELY CALL ME
12 Jun 2009 17:57
If it is the same as the 1000, you do not need the o ring with the one piece gasket. But you do need to fill in the oring groove with some kind of sealant. I think I used a red silicone sealant on mine.
Hope this helps.
Hope this helps.
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: NEED INFO IMMEDIATELY CALL ME
12 Jun 2009 18:31
just called him,goodluck!
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- kztee
-
- Offline
- User
-

Registered
- TeeRoy
- Posts: 131
- Thanks: 0
Re: NEED INFO IMMEDIATELY CALL ME
12 Jun 2009 19:15
Shannon, are you going to be ready for the Poker run tomorrow? I planned to go before it was rained out last weekend now I can't make it tomorrow due to prior engagements
1977 KZ 1000A - Currently rebuilding
1980 KZ 750 LTD - Mostly stock daily rider
1979 KZ 1000 LTD - Parts bike and/or future project
1979 KZ 1000 ST
1980 GS 750 L
2003 ZRX 1200 R
1980 KZ 750 LTD - Mostly stock daily rider
1979 KZ 1000 LTD - Parts bike and/or future project
1979 KZ 1000 ST
1980 GS 750 L
2003 ZRX 1200 R
Please Log in or Create an account to join the conversation.
- shannonbeau
-
Topic Author
- Offline
- User
-

Registered
- It's my first bike. 82 KZ 1100a
- Posts: 111
- Thanks: 1
Re: NEED INFO IMMEDIATELY CALL ME
13 Jun 2009 06:38
Dude,
You are a god amongst men. I really appreciate you taking the effort and time to call me and help me with my situation. We did the High temp silicone for that and got it put together.
I found out that I need 2 more Dowel pins for the Cam Caps but I'll get those today hopefully.
I cannot thank you all enough.
Getting ready to film the J&P Cycles Poker Run to benefit Camp Courageous right now so I'll chat later.
You are a god amongst men. I really appreciate you taking the effort and time to call me and help me with my situation. We did the High temp silicone for that and got it put together.
I found out that I need 2 more Dowel pins for the Cam Caps but I'll get those today hopefully.
I cannot thank you all enough.
Getting ready to film the J&P Cycles Poker Run to benefit Camp Courageous right now so I'll chat later.
Just got an 82 KZ 1100, working to fix it up as my first bike.
Please Log in or Create an account to join the conversation.
- franknsr
-
- Offline
- User
-

Registered
- Posts: 215
- Thanks: 0
Re: NEED INFO IMMEDIATELY CALL ME
13 Jun 2009 16:35
Formerly CSRchopper
1991 KZ1000P
Gone but not forgotten
1986 ZG1000
1982 650 CSR -shoulda kept this one-
Lisle Illinois, USA
1991 KZ1000P
Gone but not forgotten
1986 ZG1000
1982 650 CSR -shoulda kept this one-
Lisle Illinois, USA
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: NEED INFO IMMEDIATELY CALL ME
13 Jun 2009 18:04
no biggie,that tricks been around since before ape JAY started putting honda pistons in 900s! :laugh:
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- shannonbeau
-
Topic Author
- Offline
- User
-

Registered
- It's my first bike. 82 KZ 1100a
- Posts: 111
- Thanks: 1
Re: NEED INFO IMMEDIATELY CALL ME
15 Jun 2009 08:18
I am so grateful to everyone on this forum that has helped me in this project. Maybe one day, I'll be able to answer questions of new guys too.
It is coming along nicely, I need to rebuild the carbs now cause I put them on and 2 of them are over flowing within a minute of turning on the gas.
I'll get you some photos tomorrow, I forgot the disc at home today.
It is coming along nicely, I need to rebuild the carbs now cause I put them on and 2 of them are over flowing within a minute of turning on the gas.
I'll get you some photos tomorrow, I forgot the disc at home today.
Just got an 82 KZ 1100, working to fix it up as my first bike.
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: NEED INFO IMMEDIATELY CALL ME
15 Jun 2009 08:25
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- shannonbeau
-
Topic Author
- Offline
- User
-

Registered
- It's my first bike. 82 KZ 1100a
- Posts: 111
- Thanks: 1
Re: NEED INFO IMMEDIATELY CALL ME
15 Jun 2009 08:45
Way too much time on your hands. Come to Iowa and help with my bike if you have that much time... I'll have my wife bake you some great cookies or a good old fashioned Apple Pie....
We'll drink some Apple Pie for the Chewing Impaired also.
BTW, amongst my friends, I am known as King... King Aperman.
Google Shannon Appleby, you'll see photos that reference me by that name.
We'll drink some Apple Pie for the Chewing Impaired also.
BTW, amongst my friends, I am known as King... King Aperman.
Google Shannon Appleby, you'll see photos that reference me by that name.
Just got an 82 KZ 1100, working to fix it up as my first bike.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
