1978 kz650 rebuild?
- tommy_boy1990
-
Topic Author
- Offline
- User
-

Registered
- Posts: 6
- Thanks: 0
1978 kz650 rebuild?
12 Jul 2009 19:35
i just got my first bike. i paid nothing for it but its not in top shape its got alot of small issues its been in the weather for like 2+ years and the motor is siezed and im not entirely sure what i should do my dad suggested taking the motor apart and doing a rebuild but im looking for something a little more affordable. any suggestions?:dry:
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: 1978 kz650 rebuild?
12 Jul 2009 19:44
Get a low mileage used motor off ebay, hopefully one that was running before somebody trashed the bike. A seized up motor is starting out with a whole bagful of expensive problems that you know about (and probably a bunch you don't), at minimum you will need to bore it and install oversized pistons and rings.
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
- oldkaws4ever
-
- Offline
- User
-

Registered
- Have no regrets...... You only live once.
- Posts: 1639
- Thanks: 12
Re: 1978 kz650 rebuild?
12 Jul 2009 22:27
tommy_boy1990 wrote:
Here is a thought for ya, i would pull the plugs and pour or spray some Kroil or pb blaster down the cylinders and see if that frees it up. Most likly it is just stuck and not seized, my kz 650 did this when it sat one winter, some pb blaster and i was back in buisness. It worth a try and is alot cheaper than a rebuild or another motor.
i just got my first bike. i paid nothing for it but its not in top shape its got alot of small issues its been in the weather for like 2+ years and the motor is siezed and im not entirely sure what i should do my dad suggested taking the motor apart and doing a rebuild but im looking for something a little more affordable. any suggestions?:dry:
Here is a thought for ya, i would pull the plugs and pour or spray some Kroil or pb blaster down the cylinders and see if that frees it up. Most likly it is just stuck and not seized, my kz 650 did this when it sat one winter, some pb blaster and i was back in buisness. It worth a try and is alot cheaper than a rebuild or another motor.
74 Z1a 900 (Apart and making it better than ever)
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois
Please Log in or Create an account to join the conversation.
- tommy_boy1990
-
Topic Author
- Offline
- User
-

Registered
- Posts: 6
- Thanks: 0
Re: 1978 kz650 rebuild?
14 Jul 2009 11:57
thx guy i appreciate the input and im looking forward to telling you how it ends up. im a verry avid mechanic and i know a verry good machinest who is willing to help make entirely new parts for a low price (he made a machine for coke-a-cola and still has the patend) hes a good friend of mine and is verry good at what he does so anyone who cant find a part let me know and ill find out how much it will cost to get one made from scratch
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: 1978 kz650 rebuild?
14 Jul 2009 13:54
tommy_boy1990 wrote:
Interesting...... those of us with the old KZ twins are always searching for a source for 32 mm diameter valve shims of various thicknesses to adjust valve clearance. Nobody makes them anymore so they are sort of the holy grail. They would have to be ground and then surface hardened. The "new old stock" ones sell on ebay for about $20 each, so there is definitely money to be made.
thx guy i appreciate the input and im looking forward to telling you how it ends up. im a verry avid mechanic and i know a verry good machinest who is willing to help make entirely new parts for a low price (he made a machine for coke-a-cola and still has the patend) hes a good friend of mine and is verry good at what he does so anyone who cant find a part let me know and ill find out how much it will cost to get one made from scratch
Interesting...... those of us with the old KZ twins are always searching for a source for 32 mm diameter valve shims of various thicknesses to adjust valve clearance. Nobody makes them anymore so they are sort of the holy grail. They would have to be ground and then surface hardened. The "new old stock" ones sell on ebay for about $20 each, so there is definitely money to be made.
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: 1978 kz650 rebuild?
14 Jul 2009 15:30
"those of us with the old KZ twins are always searching for a source for 32 mm diameter valve shims of various thicknesses to adjust valve clearance"
Here are some (you will need to make sure of the part numbers), but they're not giving them away...
shims
Here are some (you will need to make sure of the part numbers), but they're not giving them away...
shims
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: 1978 kz650 rebuild?
14 Jul 2009 18:43
Yep, around $20 each delivered and you usually can't find the size you need. I watch ebay and usually the shims I see are the ones at the ends of the range like 3.00 and up and about 2.50 and down. The most used ones are in the 2.60 to 2.90 range, hence them never being around for sale.
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
- tommy_boy1990
-
Topic Author
- Offline
- User
-

Registered
- Posts: 6
- Thanks: 0
Re: 1978 kz650 rebuild?
14 Jul 2009 20:17
well like i said gentlemen if you need it ill get you a price and it will be brand spanking new and to exsact specs. so just let me know and ill give you a price on them glad to help anyone whos will ing to help me...speaking of witch i need a clymer or some other repair manual so i can do a basic refurb on the engine so if anyones got an extra maual for a 78 kz650 sr it would be much appreciated willing to pay or trade something of equal value:woohoo:
Please Log in or Create an account to join the conversation.
- Cychotic
-
- Offline
- User
-

Registered
- No sir, I don't like it.
- Posts: 63
- Thanks: 0
Re: 1978 kz650 rebuild?
14 Jul 2009 23:53
www.kz650.info/
has a free Haynes manual download and has a ton of useful information on your bike, also has a really good forum as well. Here is the link to the manual:
forums.kz650.info/index.php?topic=1833.0
Also Dan's motorcycle repair web page is an awesome information source as well. There is a great section on how to free a seized motor. Here's the link:
www.dansmc.com/
Link to the section on freeing seized motors:
www.dansmc.com/stuck_engine.htm
Good luck with the bike, KZ650's are a blast to ride.
Good luck with the bike, KZ650's are a blast to ride.
1977 KZ650 C1 with '78 C2 motor,
* OEM electronic ignition off '80 KZ750
* 4-into-1 header
* Uni Pod Filters
* #110 main jets, 17.5 pilot jets
1983 Honda V65 Magna stock...sold
1985 Kawasaki Ninja 600R project..sold
1997 Yamaha FZR600...latest toy
* OEM electronic ignition off '80 KZ750
* 4-into-1 header
* Uni Pod Filters
* #110 main jets, 17.5 pilot jets
1983 Honda V65 Magna stock...sold
1985 Kawasaki Ninja 600R project..sold
1997 Yamaha FZR600...latest toy
Please Log in or Create an account to join the conversation.
- tommy_boy1990
-
Topic Author
- Offline
- User
-

Registered
- Posts: 6
- Thanks: 0
Re: 1978 kz650 rebuild?
16 Jul 2009 09:53
thx alot for the manual its a great help and i look foward to telling you all how it works out for me
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
