Valve clearance, who knows?
- Buachaillin
-
Topic Author
- Offline
- User
-

Registered
- Posts: 4
- Thanks: 0
Valve clearance, who knows?
17 Jul 2009 11:30
I am rebuilding my 82 Kz 750 spectre, and I am doing some work on the valves right now, and I was wondering if anyone out there knew, or had a book and could look it up for me, as to what the valve clearance is supposed to be.
this would be a huge help. I have a repair manual coming soonish, but I dont know i that will tell me or not, and the sooner I know the better. Thank you for your help.
this would be a huge help. I have a repair manual coming soonish, but I dont know i that will tell me or not, and the sooner I know the better. Thank you for your help.
Please Log in or Create an account to join the conversation.
- kaw74z1
-
- Offline
- User
-

Registered
- 0 to 60 in 15 minutes.
- Posts: 115
- Thanks: 0
Re: Valve clearance, who knows?
17 Jul 2009 11:39
2 or 4 cylinder?
1974 Z1 with a MKII And a 1105 big bore kit 10.5 to 1 comp. Andrews 2x cams ported head dyna s with green coils V&H sidewinder pipe airshifter 4in.over arm
Please Log in or Create an account to join the conversation.
- BSKZ650
-
- Offline
- User
-

Registered
- Posts: 2061
- Thanks: 14
Re: Valve clearance, who knows?
17 Jul 2009 11:49
I think the spectres are 4 cyl, there should be a manuel on the site that will tell you the clearance.
also,, maybe a mod will move this to the engine section,
also,, maybe a mod will move this to the engine section,
77 kz650, owned for over 25 years
77 ltd1000, current rider
76 kz900, just waiting
73 z1,, gonna restore this one
piglet, leggero harley davidson
SR, Ride captian, S.E.Texas Patriot Guard Riders.. AKA KawaBob
77 ltd1000, current rider
76 kz900, just waiting
73 z1,, gonna restore this one
piglet, leggero harley davidson
SR, Ride captian, S.E.Texas Patriot Guard Riders.. AKA KawaBob
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: Valve clearance, who knows?
17 Jul 2009 13:28 - 17 Jul 2009 13:31
The twins manual spec is .05mm - 0.1mm which is .002" to .004", but I run mine at .003" - .005". The fours are likely in that same ballpark or just a shade wider. Some of them allow a max of 0.15mm (.006") on the exhaust side if my memory serves me.
1979 KZ-750 Twin
Last edit: 17 Jul 2009 13:31 by bountyhunter.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
