Hanging idle--fast idle--Ect....

  • gremmie7
  • gremmie7's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 5
  • Thanks: 0

Hanging idle--fast idle--Ect....

20 Aug 2009 15:55
#315324
:angry: :angry: :angry: :angry: :angry: :angry:

First off, this is a great and very helpful site.
That said, I am having a heck of a time with
my 1983 Kaw Spectre 1100 D2.

History:
Bike sat for 5-6 years.
Has a mac pipe and a dyna jet kit.
Jets are #120/#35 Clip is on 2nd from top.
Carbs have been cleaned and checked several times.
( I can't sleep at night until I disassemble/reassemble carbs)
All vacuum lines have been replaced, clean air system removed, block offs in place, new vacuum plugs on 1,3,4.
New orings in carbs, new carb manifolds, new fuel line, tank was cleaned and sealed. Petcock in good working order.
Fuel/air screw 1.5 turns out.
Spark advance cleaned and lubed, checked visually to be working.
Slides working properly, started with air box(stock) removed
and they return quickly.
New throttle cable, lubed, snaps right back.

Problem:

With choke on bike revs out of control up to 5000rpms,
push in choke and it idles at 1000rpms. If you rev it up with the throttle from there, the idle hangs and comes down slowly, but over 4000rpms, won't come down.

There are no vacuum leaks, I have checked with wd-40, carb cleaner, starter fluid and water.

Any help would be great and thanks again for such a great site.
1977 XT500D
2000 Kawasaki Concours
1985 Honda Nighthawk 750
1983 Kawasaki Spectre 1100

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: Hanging idle--fast idle--Ect....

20 Aug 2009 17:09 - 20 Aug 2009 17:11
#315341
Most of the usual causes seem to have been already ruled out.

Random thoughts --

Are the pilot air screw plugs in place?

Do the choke plunger tips have pads to supposedly seal off choke function when the choke is off?

Good Luck! :)
1973 Z1
KZ900 LTD
Last edit: 20 Aug 2009 17:11 by Patton.

Please Log in or Create an account to join the conversation.

  • gremmie7
  • gremmie7's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 5
  • Thanks: 0

Re: Hanging idle--fast idle--Ect....

20 Aug 2009 17:18
#315343
The choke plungers are:blink: working.

I replaced the pilot plug orings, but I think I got the wrong size. I do not feel they were snug enough. I have ordered new ones, I have a feeling this is the issue.

Of course I have had this feeling about a few other things that were causing the problem.
1977 XT500D
2000 Kawasaki Concours
1985 Honda Nighthawk 750
1983 Kawasaki Spectre 1100

Please Log in or Create an account to join the conversation.

  • Beatpoet
  • Beatpoet's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 260
  • Thanks: 0

Re: Hanging idle--fast idle--Ect....

20 Aug 2009 17:47
#315367
Sounds lean...

1) Intake/exhaust manifold leaks.
2) Timing jittery? bad points/condenser/advancer?
3) sticky floats?


Check vacuum on a manometer while revving.

Please Log in or Create an account to join the conversation.

  • larrycavan
  • larrycavan's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: Hanging idle--fast idle--Ect....

20 Aug 2009 18:00
#315369
Something tells me there's a lot more to this story that led to this ;)

Has anyone messed with the synch adjusters?

I've seen carbs rev like that when the synch adjusters are all out of wack. Usually happens when one carb was way off from the others and someone cranked the synch adjuster a bunch of turns.....

Please Log in or Create an account to join the conversation.

  • gremmie7
  • gremmie7's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 5
  • Thanks: 0

Re: Hanging idle--fast idle--Ect....

28 Aug 2009 21:33 - 28 Aug 2009 21:36
#317210
:laugh: :laugh:
Rode it to work today!!
I love parking my metrics in the service lobby of an H-D dealership.
Got the check valve o-rings yesterday, bike no longer hangs at 5k. Drops good until 3500rpm then slow until 1000rpm.
Going to synch on sunday.
Still running rich.
should I change the pilot to a #37.5?
and the main to #117.5?

Thanks for the help.
1977 XT500D
2000 Kawasaki Concours
1985 Honda Nighthawk 750
1983 Kawasaki Spectre 1100
Last edit: 28 Aug 2009 21:36 by gremmie7.

Please Log in or Create an account to join the conversation.

  • roy-b-boy-b
  • roy-b-boy-b's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 3245
  • Thanks: 103

Re: Hanging idle--fast idle--Ect....

29 Aug 2009 04:59
#317243
What kind of carbs are you running? Roy
1979 LTD Street Fighter.1977 KZ1000

Please Log in or Create an account to join the conversation.

  • gremmie7
  • gremmie7's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 5
  • Thanks: 0

Re: Hanging idle--fast idle--Ect....

29 Aug 2009 10:27
#317324
Stock 34MM with dyno jet kit, stock air cleaner, very non-restricted mac pipe.
1977 XT500D
2000 Kawasaki Concours
1985 Honda Nighthawk 750
1983 Kawasaki Spectre 1100

Please Log in or Create an account to join the conversation.

  • roy-b-boy-b
  • roy-b-boy-b's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 3245
  • Thanks: 103

Re: Hanging idle--fast idle--Ect....

29 Aug 2009 10:36
#317329
The mains seem small to me. I'm running 122.5 in my 28mm carbs.I was running 140's in my 34mm with the cams and 1075 kit.

Have you checked your valve clearance lately?

Just offering suggestions. Roy
1979 LTD Street Fighter.1977 KZ1000

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum