kz650 will not idle

  • KZ1R1000
  • KZ1R1000's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 15
  • Thanks: 0

kz650 will not idle

04 Sep 2009 18:03
#319129
My question is my kz650 will not idle. When I put the choke on and start it goes right to 6 grand turn choke off and she dies out.I changed carbs to 29 smooth bores and still doing the same thing.The smooth bores work fine on my 900.I am running 26mm carbs on the 650, could it just be that i need to rejet it?
Any help would be appreciated.

Please Log in or Create an account to join the conversation.

  • timebomb33
  • timebomb33's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 4277
  • Thanks: 10

Re: kz650 will not idle

04 Sep 2009 18:08
#319130
how long has this been doing this and are you sure your getting full fuel flow to the carb's also do you have the proper amount of freeplay in your throttle cables.
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE

Please Log in or Create an account to join the conversation.

  • Old Man Rock
  • Old Man Rock's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6071
  • Thanks: 225

Re: kz650 will not idle

04 Sep 2009 18:20
#319135
I'm thinking the same as TB, two sets of carbs doing the exact same thing... :blink:

Naw, I don't bye that...
Cables or petcock is where I'd start looking deeper...


OMR
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter

Phoenix, Az

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: kz650 will not idle

05 Sep 2009 02:06 - 05 Sep 2009 02:08
#319195
:unsure: Throttle cable frayed or maladjusted or kinked in routing?

:unsure: Timing advancer malfunctioning?

:unsure: Air leak in carb holder area?

Good Luck! :)
1973 Z1
KZ900 LTD
Last edit: 05 Sep 2009 02:08 by Patton.

Please Log in or Create an account to join the conversation.

  • KZ1R1000
  • KZ1R1000's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 15
  • Thanks: 0

Re: kz650 will not idle

05 Sep 2009 02:48
#319196
well did not think of fuel problem will try my 900 tank on bike as that has a pingle petcock on it.Will check the timing also.
Thanks just got so frustrated over looked things.

Please Log in or Create an account to join the conversation.

  • JMKZHI
  • JMKZHI's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
    Registered
  • Posts: 2417
  • Thanks: 48

Re: kz650 will not idle

05 Sep 2009 05:57
#319222
Have you tried an intermediate setting on the choke lever?
Like 1/4 or 1/2 or something?

Please Log in or Create an account to join the conversation.

  • joerider
  • joerider's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 8
  • Thanks: 0

Re: kz650 will not idle

05 Sep 2009 19:24
#319338
I had something similar, I'm guessing your throttle cable is set wrong and not going all the way back (or closed).

My problem was the carb spring weakening over time. I hit the hip and spent way too much 40.00 for that stupid spring and it made all the difference in the world.

Also don't pull the petcock off, just pull the line and see if it runs out full or the diameter of the line.

Anywho check the throttle position, I'm sure that is your problem. Mine would start up hit 4 to 5k and I would have to shut it off.

Please Log in or Create an account to join the conversation.

  • TerryK
  • TerryK's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 607
  • Thanks: 2

Re: kz650 will not idle

05 Sep 2009 20:39
#319378
Let me get this clear. It dies once you turn the choke off right? If so it won't be a sticking throttle cable. Have you checked the idle adjuster?
1977 KZ1000
GSXR swingarm and rear brake
WM6 rear Akront rim
Wiseco 1075c pistons
33 smoothbores
stage 3 Web Cams
Head porting
Dyna S ignition
Lockhart oil cooler
Wiseco header



1980 Z1R drag bike
1200cc
38 Flatslides, .
500' cams
7" slick
Dyan 4000 SP ignition
etc

Ontario, Canada

Please Log in or Create an account to join the conversation.

  • TeK9iNe
  • TeK9iNe's Avatar
  • Offline
  • User
  • User
    Registered
  • What did you do!?!
  • Posts: 2436
  • Thanks: 28

Re: kz650 will not idle

05 Sep 2009 21:53
#319389
Let me get this clear. It dies once you turn the choke off right? If so it won't be a sticking throttle cable. Have you checked the idle adjuster?

Idle adjuster... did that on a CB360T. Startled me so bad it slapped the needle all the way around the tach before I could find the kill. :laugh:
Motorcycle Shop Owner/Operator

79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors ;)

Please Log in or Create an account to join the conversation.

  • KZ1R1000
  • KZ1R1000's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 15
  • Thanks: 0

Re: kz650 will not idle

07 Sep 2009 15:47
#319728
applied gasket goop to carb holders and adjusted cables bike idles high.It does idle now which is a huge improvement.bogs out with my smooth bores but, mains are way to big for 650.Next will be the idle adjuster,will let you all know.Thnaks for all the responses much appreciated

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum