How's it look to you?

  • chrispysaki
  • chrispysaki's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 150
  • Thanks: 0

How's it look to you?

03 Oct 2009 22:18 - 03 Oct 2009 22:19
#325353
So I finally got my head off (man does my neck hurt!). I had a leak coming from the head, which I thought might have been the valve stem seals, but maybe the gasket. Turns out the gasket is in great shape - I could reuse it if I wanted. Anyway, I'm planning on replacing the valve seals, gaskets, etc. I think I probably need to lap the valves, since they're not sitting flush.

Here are the pics of the valves and the pistons. The exhaust valves are all white (as are the valve stems). Does that mean it's running lean? It was running with a 4-1 pipe with the original jets, and I recently added pods and upped the jets by three sizes, so if it is lean, I'm thinking it was probably a result of the previous configuration.

So, does anyone see anything here that you think I should be aware of or concerned about?

Thanks,
Chris
Last edit: 03 Oct 2009 22:19 by chrispysaki. Reason: looks like I need to upload separately

Please Log in or Create an account to join the conversation.

  • chrispysaki
  • chrispysaki's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 150
  • Thanks: 0

Re: How's it look to you?

03 Oct 2009 22:20
#325354

Please Log in or Create an account to join the conversation.

  • chrispysaki
  • chrispysaki's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 150
  • Thanks: 0

Re: How's it look to you?

03 Oct 2009 22:22
#325355

Please Log in or Create an account to join the conversation.

  • chrispysaki
  • chrispysaki's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 150
  • Thanks: 0

Re: How's it look to you?

03 Oct 2009 22:23
#325356

Please Log in or Create an account to join the conversation.

  • chrispysaki
  • chrispysaki's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 150
  • Thanks: 0

Re: How's it look to you?

03 Oct 2009 22:23
#325357

Please Log in or Create an account to join the conversation.

  • chrispysaki
  • chrispysaki's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 150
  • Thanks: 0

Re: How's it look to you?

03 Oct 2009 22:24
#325358

Please Log in or Create an account to join the conversation.

  • chrispysaki
  • chrispysaki's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 150
  • Thanks: 0

Re: How's it look to you?

03 Oct 2009 22:24
#325359

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: How's it look to you?

03 Oct 2009 23:17 - 03 Oct 2009 23:20
#325362
I thought whitish or very light tan exhaust valves was OK. Mine are always blackened with burned oil from valve seal leaks by the time I have to do the head, but that's not their proper color.:laugh:

Piston tops don't look bad.

Check the spark plugs to see if you were running lean.
1979 KZ-750 Twin
Last edit: 03 Oct 2009 23:20 by bountyhunter.

Please Log in or Create an account to join the conversation.

  • Mark Wing
  • Mark Wing's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1695
  • Thanks: 22

Re: How's it look to you?

04 Oct 2009 00:12
#325365
I think it looks fine.

Mark
Jesus loves you Everyone else thinks your an ***

77 KZ650 C1 with ZX7 forks, GPZ mono rear, wider 18 police wheels and Yoshimura motor.

Yorba Linda Cal.

Please Log in or Create an account to join the conversation.

  • 9am53
  • 9am53's Avatar
  • Offline
  • User
  • User
    Registered
  • homebrew, and some bbq
  • Posts: 1787
  • Thanks: 3

Re: How's it look to you?

04 Oct 2009 05:34
#325375
are you going to clean up that carbon before you put it back together?

Please Log in or Create an account to join the conversation.

  • trianglelaguna
  • trianglelaguna's Avatar
  • Offline
  • User
  • User
    Registered
  • New and improved - extra strength
  • Posts: 8019
  • Thanks: 236

Re: How's it look to you?

04 Oct 2009 05:46
#325379
heck i'd be tickled pink if by the time i open my motors they look that good....i think that is the coloration of a normal running gas engine...but others more qualified will better tell....oh...and nice quality on your pics..helps others to see your questioned area really well........good luck...
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife

Please Log in or Create an account to join the conversation.

  • Old Man Rock
  • Old Man Rock's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6071
  • Thanks: 225

Re: How's it look to you?

04 Oct 2009 06:46
#325385
Exhaust valve coloring....
Pending motor build, head valve & porting, elevations, jetting, exhaust etc... may just be correct setup for that motor...

One thing for sure, with all 4 exhaust valves basically the same color, this also informs you you have all 4 carbs as well jetted & synced the same... Nice !

OMR
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter

Phoenix, Az

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum