1015cc Piston Kit & Cylinder

  • spearsgaryhi
  • spearsgaryhi's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 29
  • Thanks: 0

1015cc Piston Kit & Cylinder

05 Oct 2009 03:50
#325574
It's been a long time sence my last post. But I think that I've read nearly every thred on this sight over the past 7 monthes. I just cant remember all of them AND ITS A BITCH TRYING TO GO BACK AND FIND SOMETHING THAT YOU KNOW YOU READ SOMEWHERE 3 OR 4 MONTHS BACK. I'm well into my rebuild project now and tonight discovered that I'll need a new set of jugs. I have a stock KZ 900 engin. A few of the cooling fins are busted off. Just cosmetic and I could live with that. But I found that one of the spark plugs had been cross threded by some previos idiot. Not this one! And then did a very bad job fixing the mistake. The hole is 1/8" larger than the rest. Now am I correct in thinking that I can use the head that I have just taken off without major modification on a new 1015cc Piston Kit & Cylinder?. The valves look good ect. This is my first rebuild. I'm having tons of fun with the project. It's getting expensive. But well worth it. Aloha from the Big Island. PS. Can a machien shop fix the oversized spark plug probleM? Thogh for the price I think I'll just fork up thr cash for a big boor kit. Thanks:huh:

Please Log in or Create an account to join the conversation.

  • Old Man Rock
  • Old Man Rock's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6071
  • Thanks: 225

Re: 1015cc Piston Kit & Cylinder

05 Oct 2009 04:08
#325575
903cc bored to 1015cc kit will drop right in, no upper case boring required....

If your looking for a new cylinder go here... Gary turned out to be a good guy... Long story...

www.overstockpartsgalore.com/engine1007.html

You'll receive a 903 cylinder bored out to 70mm for a Wiseco 1015cc kit (all hardware & gaskets included) with no broken fins....

Caution, MRE (:angry: )does the machining, cylinder head decking (BLOCK HAS BEEN DECKED JUST A MINIMUM (LESS THAN .010") and in my case, found they where off where I had to double the cylinder base gasket (from .020" to .040") to compensate. Others have had good success... Mod Tony I believe had no issues.

OMR
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter

Phoenix, Az

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: 1015cc Piston Kit & Cylinder

05 Oct 2009 04:40 - 05 Oct 2009 04:41
#325580
Might look into HeliCoil, TimeSert and KeenSert as possible spark plug hole repair options.

Where damaged spark plug hole threads may be salvagable, the reverse tap tool might be helpful. It re-taps starting from deep end of the hole where threads often remain sound to assure a good start for the re-tap.

Good Luck! :)
1973 Z1
KZ900 LTD
Last edit: 05 Oct 2009 04:41 by Patton.

Please Log in or Create an account to join the conversation.

  • BSKZ650
  • BSKZ650's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 2061
  • Thanks: 14

Re: 1015cc Piston Kit & Cylinder

05 Oct 2009 05:17
#325594
A good machine shop should be able to weld up the spark plug hole and retap it, you may even want to do a little port work on it while you have the head out getting fixed also
77 kz650, owned for over 25 years
77 ltd1000, current rider
76 kz900, just waiting
73 z1,, gonna restore this one
piglet, leggero harley davidson
SR, Ride captian, S.E.Texas Patriot Guard Riders.. AKA KawaBob

Please Log in or Create an account to join the conversation.

  • spearsgaryhi
  • spearsgaryhi's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 29
  • Thanks: 0

Re: 1015cc Piston Kit & Cylinder

05 Oct 2009 09:02
#325640
Thanks guys

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum