Piston Gas Porting
- kzz1p
-
Topic Author
- Offline
- User
-

Registered
- One Test Is Worth A Thousand Expert Opinions!
- Posts: 1432
- Thanks: 3
Re: Piston Gas Porting
23 Oct 2009 19:31
arai59 wrote:
Now thats funny, I don't care who, yo Momma is!
All good and fine John. But what color will your bike be ?
Now thats funny, I don't care who, yo Momma is!
Please Log in or Create an account to join the conversation.
- kzz1p
-
Topic Author
- Offline
- User
-

Registered
- One Test Is Worth A Thousand Expert Opinions!
- Posts: 1432
- Thanks: 3
Re: Piston Gas Porting
23 Oct 2009 19:33 - 23 Oct 2009 20:08
keith1 wrote:
It means nothing to a street rider. It's for race stuff. It's just one more thing, they have done to Z's for years.
I think it is important to archive as much info as possible.
Some people will someday hand their bikes down, to their children. Where are they going, to get info? How will they learn?
All the old dudes are getting older. It takes me alot of time, to find some info, how hard will it be in 20 years?
There has been many things done to these bikes, we havn't even, talked about yet.
I hope that many people archive, as much as, they can.
thompsonmx100 wrote:interesting I've never heard of that before. It makes sense but does sound like something you would want to use in a race bike rather than a street bike
and this all means what to the 99.8% of us who run on the street...?:laugh:
It means nothing to a street rider. It's for race stuff. It's just one more thing, they have done to Z's for years.
I think it is important to archive as much info as possible.
Some people will someday hand their bikes down, to their children. Where are they going, to get info? How will they learn?
All the old dudes are getting older. It takes me alot of time, to find some info, how hard will it be in 20 years?
There has been many things done to these bikes, we havn't even, talked about yet.
I hope that many people archive, as much as, they can.
Last edit: 23 Oct 2009 20:08 by kzz1p.
Please Log in or Create an account to join the conversation.
- arai59
-
- User
-

Public
- Thanks: 0
Re: Piston Gas Porting
23 Oct 2009 19:38
kzz1p wrote:
I dunno.....I'ma gonna havs to ask Plummen on dis. Heza oughta know.
keith1 wrote:thompsonmx100 wrote:interesting I've never heard of that before. It makes sense but does sound like something you would want to use in a race bike rather than a street bike
and this all means what to the 99.8% of us who run on the street...?:laugh:
It means nothing to a street rider. It's for race stuff. It's just one more thing, they have done to Z's for years.
I dunno.....I'ma gonna havs to ask Plummen on dis. Heza oughta know.
Please Log in or Create an account to join the conversation.
- ArthurGoVroom
-
- Offline
- User
-

Registered
- I'd rather ride it than shine it
- Posts: 52
- Thanks: 0
Re: Piston Gas Porting
23 Oct 2009 20:01What is the lowest compression ratio, you have seen them used with? The lowest I have seen is 10:1 ratio.
I used them on the engines I built, they are flatheads, at about 9.5:1 compression. Not sure how much of a difference just the gasporting made. I changed to a piston that was much lighter, with a lower tension ring pack, and gasported it, and netted about 10% peak horsepower gain on the dyno.
1976 KZ900A4, 4-1 header, rear lowering kit, grab bar removed, still shining and painting parts as time permits
Please Log in or Create an account to join the conversation.
- kzz1p
-
Topic Author
- Offline
- User
-

Registered
- One Test Is Worth A Thousand Expert Opinions!
- Posts: 1432
- Thanks: 3
Re: Piston Gas Porting
23 Oct 2009 20:09
kzz1p wrote:
keith1 wrote:thompsonmx100 wrote:interesting I've never heard of that before. It makes sense but does sound like something you would want to use in a race bike rather than a street bike
and this all means what to the 99.8% of us who run on the street...?:laugh:
It means nothing to a street rider. It's for race stuff. It's just one more thing, they have done to Z's for years.
I think it is important to archive as much info as possible.
Some people will someday hand their bikes down, to their children. Where are they going, to get info? How will they learn?
All the old dudes are getting older. It takes me alot of time, to find some info, how hard will it be in 20 years?
There has been many things done to these bikes, we havn't even, talked about yet.
I hope that many people archive, as much as, they can!
Please Log in or Create an account to join the conversation.
- kzz1p
-
Topic Author
- Offline
- User
-

Registered
- One Test Is Worth A Thousand Expert Opinions!
- Posts: 1432
- Thanks: 3
Re: Piston Gas Porting
23 Oct 2009 20:11
ArthurGoVroom wrote:
Was your 10% gain, in the upper RPM range?
What is the lowest compression ratio, you have seen them used with? The lowest I have seen is 10:1 ratio.
I used them on the engines I built, they are flatheads, at about 9.5:1 compression. Not sure how much of a difference just the gasporting made. I changed to a piston that was much lighter, with a lower tension ring pack, and gasported it, and netted about 10% peak horsepower gain on the dyno.
Was your 10% gain, in the upper RPM range?
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: Piston Gas Porting
23 Oct 2009 21:05
arai59 wrote:
just sent a set of 1197 pistons to larry c that were gas ported,around 13:1 depending on what head you run em with.kzz1p wrote:keith1 wrote:thompsonmx100 wrote:interesting I've never heard of that before. It makes sense but does sound like something you would want to use in a race bike rather than a street bike
and this all means what to the 99.8% of us who run on the street...?:laugh:
It means nothing to a street rider. It's for race stuff. It's just one more thing, they have done to Z's for years.
I dunno.....I'ma gonna havs to ask Plummen on dis. Heza oughta know.
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: Piston Gas Porting
23 Oct 2009 21:07
i seem to remember that being done to dirtbike pistons also many years ago,maybe mid-late 70s
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- kzz1p
-
Topic Author
- Offline
- User
-

Registered
- One Test Is Worth A Thousand Expert Opinions!
- Posts: 1432
- Thanks: 3
Re: Piston Gas Porting
23 Oct 2009 23:05
PLUMMEN wrote:
I can remember when Vance & Hines sold them that way, right off the shelf. It was their high compression units. Most piston companies charge extra. Most used a .040"-.060" dia. holes for the ports.
They have been used in all kinds of stuff, over the years.
Plummen, do you remember how many holes, those pistons had in them?
i seem to remember that being done to dirtbike pistons also many years ago,maybe mid-late 70s
I can remember when Vance & Hines sold them that way, right off the shelf. It was their high compression units. Most piston companies charge extra. Most used a .040"-.060" dia. holes for the ports.
They have been used in all kinds of stuff, over the years.
Plummen, do you remember how many holes, those pistons had in them?
Please Log in or Create an account to join the conversation.
- APE Jay
-
- User
-

Public
- Thanks: 0
Please Log in or Create an account to join the conversation.
- kzz1p
-
Topic Author
- Offline
- User
-

Registered
- One Test Is Worth A Thousand Expert Opinions!
- Posts: 1432
- Thanks: 3
Re: Piston Gas Porting
24 Oct 2009 00:44
APE Jay wrote:
Jay
Does the wear rate of the rings increase?
We usually do 8
Jay
Does the wear rate of the rings increase?
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Piston Gas Porting
24 Oct 2009 04:19 - 24 Oct 2009 04:21
kzz1p wrote:
Seems like the holes would tend to get plugged with carbon after running for a little while longer than 1/4 mile 
Good Luck!
Good Luck!
1973 Z1
KZ900 LTD
KZ900 LTD
Last edit: 24 Oct 2009 04:21 by Patton.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
