Permatex Grey - gasket maker
- JR
-
Topic Author
- Offline
- Sustaining Member
-

Registered
- Posts: 2981
- Thanks: 500
Permatex Grey - gasket maker
09 Nov 2009 14:12
This is probably a dumb question. I have this tube of Permatex Grey gasket maker and was wondering if I can us it to mate the valve cover to the cylinder head - ie instead of a gasket...........or should I just go ahead and buy the valve cover gasket ?
1980 kz750E1, Delkevic exhaust
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: Permatex Grey - gasket maker
09 Nov 2009 14:16
buy a gasket and a can of spray on copper coat to glue it to valve cover .but as the legal dept keeps reminding me you should clear all posts/techno stuff through trianglelaguna and arai59 aka greg and craig enterprises to be safe
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- Locozuna
-
- Offline
- User
-

Registered
- Posts: 1302
- Thanks: 1
Re: Permatex Grey - gasket maker
09 Nov 2009 14:24
Yes!!! Buy a gasket and the copper spray. You will thank yourself. Just had to re-do an oil pan. Second time I used the copper and it is nice! No worries!
KZ900LTD, KZ750LTD, KZ650, 72'Triumph Trident
"Over the Mountains
Of the Moon,
Down the Valley of the Shadow,
Ride, boldly ride,"
The shade replied
"If you seek for Eldorado!"
"Over the Mountains
Of the Moon,
Down the Valley of the Shadow,
Ride, boldly ride,"
The shade replied
"If you seek for Eldorado!"
Please Log in or Create an account to join the conversation.
- RonKZ650
-
- Offline
- User
-

Registered
- Posts: 3719
- Thanks: 252
Re: Permatex Grey - gasket maker
09 Nov 2009 15:45
Probably been mentioned numerous times before, but use a gasket for sure. Whatever you do don't seal both sides. It makes for a huge mess next time. Do it dry, use a decent gasket and if surfaces are clean it won't leak, otherwise use the seal on the engine side only, leave the valve cover side dry and the cover comes right off from then on out and can be reused.
321,000 miles on KZ's that I can remember. Not going to see any more.
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Permatex Grey - gasket maker
09 Nov 2009 16:57 - 09 Nov 2009 17:07
Valve cover gaskets are cheap $10 at Z1....
Basically the price of a Happy meal any longer.....
EIDT:
As mentioned, pay the extra $10 bucks for the permatex compounds thus no leaky....
Basically the price of a Happy meal any longer.....
EIDT:
As mentioned, pay the extra $10 bucks for the permatex compounds thus no leaky....
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Last edit: 09 Nov 2009 17:07 by Old Man Rock.
Please Log in or Create an account to join the conversation.
- JR
-
Topic Author
- Offline
- Sustaining Member
-

Registered
- Posts: 2981
- Thanks: 500
Re: Permatex Grey - gasket maker
09 Nov 2009 18:51
Thanks gentlemen. Ma Kaw gasket ordered from the local dealer. It will probably cost me and arm and a leg but at least it will be here on Wednesday. Not many riding days left up here and if the weather holds I just might make it to Port Dover on Friday the 13th
1980 kz750E1, Delkevic exhaust
Please Log in or Create an account to join the conversation.
- hugo
-
- Offline
- User
-

Registered
- '92 Zephyr 750
- Posts: 313
- Thanks: 95
Re: Permatex Grey - gasket maker
10 Nov 2009 04:16 - 10 Nov 2009 04:19
Don't feel too bad for the price, I have a Zephyr 750 and the gasket is about $40.00. The less expensive KZ750/650 won't fit properly because the Zephyr valve cover mimicks the Z900.
The Zeph gasket is impregnated with graphite, which is an excellent sealer. Manual says apply it dry. The problem is when you want to remove it, leaves residues on the surfaces very hard to scrape. You don't need to help the sealing, but need something to make it easier to remove. Even non-stick cooking oil would help. I usualy lube it with moly grease.
The Zeph gasket is impregnated with graphite, which is an excellent sealer. Manual says apply it dry. The problem is when you want to remove it, leaves residues on the surfaces very hard to scrape. You don't need to help the sealing, but need something to make it easier to remove. Even non-stick cooking oil would help. I usualy lube it with moly grease.
Last edit: 10 Nov 2009 04:19 by hugo.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
