Valve Cover removal question

  • sakiguy
  • sakiguy's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 123
  • Thanks: 2

Valve Cover removal question

12 Nov 2009 02:38
#333058
I want to retorque the cylinder head bolts, and to do that I have to remove the valve covers to get clearance. I was wondering if I would have to replace the valve cover gaskets if I removed them or if I could just reuse them.
1983 KZ750 N2 Shaft

Please Log in or Create an account to join the conversation.

  • loudhvx
  • loudhvx's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 10863
  • Thanks: 1622

Re: Valve Cover removal question

12 Nov 2009 02:52
#333059
That depends on how the old gasket was put on. I polish the cover and head surface, then use anti-seize on the gasket. I can reuse the gasket 4 or 5 times that way. It comes off like brand new.

I don't know what motor we are talking about, but if it's a motor with hyvo cam chain (with chain guide in the valve cover), remember to release the timing-chain tensioner before putting the valve cover back on. If you don't, you can break the chain, or tensioner, or guides. :(

Please Log in or Create an account to join the conversation.

  • sakiguy
  • sakiguy's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 123
  • Thanks: 2

Re: Valve Cover removal question

12 Nov 2009 03:20
#333064
My bike is a 1983 kz750n2 shaft. Not sure if it has a chain guide in the valve cover. I got the manual though so I'll check.
1983 KZ750 N2 Shaft

Please Log in or Create an account to join the conversation.

  • RonKZ650
  • RonKZ650's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 3719
  • Thanks: 252

Re: Valve Cover removal question

12 Nov 2009 06:28
#333082
No need to remove anything to torque the head, all 12 14mm head bolts can all be easily accessed.
321,000 miles on KZ's that I can remember. Not going to see any more.

Please Log in or Create an account to join the conversation.

  • txturbo
  • txturbo's Avatar
  • Offline
  • User
  • User
    Registered
  • Ex-Kawasaki Mechanic 1981-1985
  • Posts: 81
  • Thanks: 0

Re: Valve Cover removal question

12 Nov 2009 07:14
#333093
Valve cover doesn't need to be removed, but you will need to remove the tank and possibly the coils.
1984 ZX750 E1 GPz Turbo
1984 ZX1100 A2 GPz
1984 ZX900
1996 KZ1000P Police bike
1970 Honda CT 70H 4sp manual
1965 Honda Dream 305
2003 Honda Shadow 1100

1971 Suzuki MT50 Trailhopper
1969 Camaro SS
1966 Impala
1966 Impala SS 427/4spd

Please Log in or Create an account to join the conversation.

  • sakiguy
  • sakiguy's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 123
  • Thanks: 2

Re: Valve Cover removal question

12 Nov 2009 10:48 - 12 Nov 2009 10:48
#333129
I was looking at it last night and it looked like the valve covers blocked some of the head bolts...but after looking at it in some light, you guys are right, they made holes so that you can access them. Tanks is actually off already. Man that just saved me a lot of time. :)
1983 KZ750 N2 Shaft
Last edit: 12 Nov 2009 10:48 by sakiguy.

Please Log in or Create an account to join the conversation.

  • MFolks
  • MFolks's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6650
  • Thanks: 541

Re: Valve Cover removal question

12 Nov 2009 10:56
#333132
I've read/heard that spraying new valve cover gaskets with non stick cooking spray(like PAM) will do the same thing.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)

Please Log in or Create an account to join the conversation.

  • sakiguy
  • sakiguy's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 123
  • Thanks: 2

Re: Valve Cover removal question

14 Nov 2009 10:21
#333619
Should I loosen all the head bolts first before retorquing them to possibly avoid overtightening?
1983 KZ750 N2 Shaft

Please Log in or Create an account to join the conversation.

  • RonKZ650
  • RonKZ650's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 3719
  • Thanks: 252

Re: Valve Cover removal question

14 Nov 2009 10:45
#333622
Yes, just barely loosen them, then torque to spec.
321,000 miles on KZ's that I can remember. Not going to see any more.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum