Tore it down a bit.......
- keith1
-
Topic Author
- Offline
- User
-

Registered
- Posts: 1646
- Thanks: 3
Re: Tore it down a bit.......
28 Dec 2009 10:31
Old Man Rock wrote:
that does look nice....i m figuring since i spent the cash on the braided, may as well run it where you can see it.....its overkill, but what the hey....
that does look nice....i m figuring since i spent the cash on the braided, may as well run it where you can see it.....its overkill, but what the hey....
Please Log in or Create an account to join the conversation.
- rt green
-
- Offline
- User
-

Registered
- Posts: 49
- Thanks: 0
Re: Tore it down a bit.......
02 Jan 2010 18:26
bits-o-metal. oil cooler. hmmmm. how old is the oil cooler? you thinking what i'm thinking?
Please Log in or Create an account to join the conversation.
- keith1
-
Topic Author
- Offline
- User
-

Registered
- Posts: 1646
- Thanks: 3
Re: Tore it down a bit.......
02 Jan 2010 19:03 - 02 Jan 2010 19:15
rt green wrote:
nope...probably not..:laugh: ..oil cooler has been on the bike for many moons b4 i got it.....i found the source of the bits last week.....i wasnt going to air out all my dirty laundry,
but what the hey.....
somehow, the cam chain decided it was going to ride next to
the tensioner roller instead of on it.....by the amount of wear,i can guesstimate it happened when i re-set cams due to idle problem...the only thing i can think of is that i didnt back off on the manual adjuster all the way when i did my re-setting.....pricey little lesson...2 new liska sprockets and a new liska tensioner and new tsubaki cam chain.
that is on top of getting head redone due to my own stupidity with cam timing.......expensive lessons....
bits-o-metal. oil cooler. hmmmm. how old is the oil cooler? you thinking what i'm thinking?
nope...probably not..:laugh: ..oil cooler has been on the bike for many moons b4 i got it.....i found the source of the bits last week.....i wasnt going to air out all my dirty laundry,
but what the hey.....
somehow, the cam chain decided it was going to ride next to
the tensioner roller instead of on it.....by the amount of wear,i can guesstimate it happened when i re-set cams due to idle problem...the only thing i can think of is that i didnt back off on the manual adjuster all the way when i did my re-setting.....pricey little lesson...2 new liska sprockets and a new liska tensioner and new tsubaki cam chain.
that is on top of getting head redone due to my own stupidity with cam timing.......expensive lessons....
Last edit: 02 Jan 2010 19:15 by keith1.
Please Log in or Create an account to join the conversation.
- keith1
-
Topic Author
- Offline
- User
-

Registered
- Posts: 1646
- Thanks: 3
- keith1
-
Topic Author
- Offline
- User
-

Registered
- Posts: 1646
- Thanks: 3
- keith1
-
Topic Author
- Offline
- User
-

Registered
- Posts: 1646
- Thanks: 3
Re: Tore it down a bit.......
04 Jan 2010 17:52
installed the tsubaki hd cam chain with a master link tonite...got the liska stuff from Z-1....head left a couple days ago for Larry's....gotta get the cometic head gasket...
snow outside makes garage time pass the time till spring...:laugh: .....
snow outside makes garage time pass the time till spring...:laugh: .....
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Tore it down a bit.......
04 Jan 2010 17:56
Damn big dumb-ass Pollack...
Learn to focus the freakin camera.... :laugh: :laugh: :laugh:
Glad to hear some excitement back in your writing...
OMR
Learn to focus the freakin camera.... :laugh: :laugh: :laugh:
Glad to hear some excitement back in your writing...
OMR
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- keith1
-
Topic Author
- Offline
- User
-

Registered
- Posts: 1646
- Thanks: 3
Re: Tore it down a bit.......
04 Jan 2010 18:15
Old Man Rock wrote:
thanks...i guess:laugh: ....a little more attention to detail this time with a little better parts selection(and some mild porting)and i should have a first rate rocket ...
i say this because it would lift the front wheel in 1st without effort before and bike wasnt 100%....working on this thing will get me through the winter doldrums....
Damn big dumb-ass Pollack...
Learn to focus the freakin camera.... :laugh: :laugh: :laugh:
Glad to hear some excitement back in your writing...
OMR
thanks...i guess:laugh: ....a little more attention to detail this time with a little better parts selection(and some mild porting)and i should have a first rate rocket ...
i say this because it would lift the front wheel in 1st without effort before and bike wasnt 100%....working on this thing will get me through the winter doldrums....
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Tore it down a bit.......
04 Jan 2010 18:20
Don't forget... AVI record for you-tube! 
Hopefully we'll be able to hear the old girl roar to life over your balling like a school girl with excitement... :huh: :dry: :woohoo: :laugh:
Hopefully we'll be able to hear the old girl roar to life over your balling like a school girl with excitement... :huh: :dry: :woohoo: :laugh:
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- keith1
-
Topic Author
- Offline
- User
-

Registered
- Posts: 1646
- Thanks: 3
Re: Tore it down a bit.......
04 Jan 2010 18:35
Old Man Rock wrote:
got the wife a new digital camera for xmas so i got mine(ours) back and i also got her a new video camera....one of those ones the size of my fist with an 8 gb card...there will be vids when i get it running again and when i can figure out filtering wind noise,some tach-happy fun on video.....:woohoo:
Don't forget... AVI record for you-tube!
Hopefully we'll be able to hear the old girl roar to life over your balling like a school girl with excitement... :huh: :dry: :woohoo: :laugh:
got the wife a new digital camera for xmas so i got mine(ours) back and i also got her a new video camera....one of those ones the size of my fist with an 8 gb card...there will be vids when i get it running again and when i can figure out filtering wind noise,some tach-happy fun on video.....:woohoo:
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Tore it down a bit.......
04 Jan 2010 18:39
Anyone want to take side bets he won't be able to focus that for damn either?
:laugh: :laugh: :laugh:
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- keith1
-
Topic Author
- Offline
- User
-

Registered
- Posts: 1646
- Thanks: 3
Re: Tore it down a bit.......
04 Jan 2010 18:43
Old Man Rock wrote:
it wont matter after 5k anyways ginzo, the scenery will be going by too quick to focus anyway.....
:laugh:
Anyone want to take side bets he won't be able to focus that for damn either?:laugh: :laugh: :laugh:
it wont matter after 5k anyways ginzo, the scenery will be going by too quick to focus anyway.....
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
