Tore it down a bit.......
- keith1
-
Topic Author
- Offline
- User
-

Registered
- Posts: 1646
- Thanks: 3
Re: Tore it down a bit.......
23 Jan 2010 16:24
did a little clean-up and superglued the shaved down dampers on the shafts.....as peviously mentioned, new liska stuff, new shafts, and new dampers......got a wiseco 1075 gasket.....just have to fill the groove and clean up a little more.....the good thing about winter is you are not on a schedule.....go out and work when ya have the time and feel so inclined.
....ready to go when head gets back....
Please Log in or Create an account to join the conversation.
- keith1
-
Topic Author
- Offline
- User
-

Registered
- Posts: 1646
- Thanks: 3
- keith1
-
Topic Author
- Offline
- User
-

Registered
- Posts: 1646
- Thanks: 3
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Tore it down a bit.......
24 Jan 2010 04:53 - 24 Jan 2010 04:54
WTF???? Just noticed something in one of your recent images...
Why is the tensioner still in?
Completely remove this and install this last thus giving all your timing chain slack up for camshafts and timing components once the head is place.....
Why is the tensioner still in?
Completely remove this and install this last thus giving all your timing chain slack up for camshafts and timing components once the head is place.....
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Last edit: 24 Jan 2010 04:54 by Old Man Rock.
Please Log in or Create an account to join the conversation.
- 9am53
-
- Offline
- User
-

Registered
- homebrew, and some bbq
- Posts: 1787
- Thanks: 3
Re: Tore it down a bit.......
24 Jan 2010 05:32
Old Man Rock wrote:
it looks like it's pulled out all the way, would that not be fine?
WTF???? Just noticed something in one of your recent images...
Why is the tensioner still in?
Completely remove this and install this last thus giving all your timing chain slack up for camshafts and timing components once the head is place.....
it looks like it's pulled out all the way, would that not be fine?
'84 GPz900r
'71 CB350
s289.photobucket.com/albums/ll231/9am53/
'71 CB350
s289.photobucket.com/albums/ll231/9am53/
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Tore it down a bit.......
24 Jan 2010 05:50
Why take the chance especially after what he just went through where his timing chain didn't route over the gear ideally most likely due to unnoticed chain tensions thus balled up/kink when final setup & it gave... :pinch:
No thanks, I'd remove all chain tension variables as depicted in the OEM manual is the way I'd go...
No thanks, I'd remove all chain tension variables as depicted in the OEM manual is the way I'd go...
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- mark1122
-
- Offline
- User
-

Registered
- Keep twisting it
- Posts: 5297
- Thanks: 109
Re: Tore it down a bit.......
24 Jan 2010 06:01
keith1 wrote:
did a little clean-up and superglued the shaved down dampers on the shafts.....as peviously mentioned, new liska stuff, new shafts, and new dampers......got a wiseco 1075 gasket.....just have to fill the groove and clean up a little more.....the good thing about winter is you are not on a schedule.....go out and work when ya have the time and feel so inclined.....ready to go when head gets back.... quote]
What do u mean by, shaved down dampers?
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Tore it down a bit.......
24 Jan 2010 06:14
Good catch Mark....
Keith, gluing them into place over the flat spot on gear shafts, yup, get that but as Mark caught, these normally ride in height just over the deck height and will compress tightly into place once the head is installed and torqued down thus securely seating your two idler gears in place....
Seriously, way to go Mark... Dig it...
Keith, gluing them into place over the flat spot on gear shafts, yup, get that but as Mark caught, these normally ride in height just over the deck height and will compress tightly into place once the head is installed and torqued down thus securely seating your two idler gears in place....
Seriously, way to go Mark... Dig it...
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: Tore it down a bit.......
24 Jan 2010 06:16 - 24 Jan 2010 06:16
dig it! are you a retro backhoe operating plumber now? :laugh:
Still recovering,some days are better than others.
Last edit: 24 Jan 2010 06:16 by PLUMMEN.
Please Log in or Create an account to join the conversation.
- hardr0ck68
-
- Offline
- User
-

Registered
- Who put the what in the where?
- Posts: 798
- Thanks: 3
Re: Tore it down a bit.......
24 Jan 2010 07:12
Old Man Rock wrote:
I could be off the mark here, but I think what Mark was asking is why would he shave the dampeners? It must be something you 1000cc guys do because I have never heard of shaving the dampeners on the 650's. The clymer manual I have recommends the superglue trick (which keeps the dampeners from ending up in your oil pan when you put the head on) but why shave them?
Good catch Mark....
Keith, gluing them into place over the flat spot on gear shafts, yup, get that but as Mark caught, these normally ride in height just over the deck height and will compress tightly into place once the head is installed and torqued down thus securely seating your two idler gears in place....
Seriously, way to go Mark... Dig it...
I could be off the mark here, but I think what Mark was asking is why would he shave the dampeners? It must be something you 1000cc guys do because I have never heard of shaving the dampeners on the 650's. The clymer manual I have recommends the superglue trick (which keeps the dampeners from ending up in your oil pan when you put the head on) but why shave them?
1977 kz650 c1
bought it because I was told it would never run again...I like to prove people wrong.
bought it because I was told it would never run again...I like to prove people wrong.
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Tore it down a bit.......
24 Jan 2010 07:28
Somewhat goes hand in hand... Question of why Keith did it in the first place doesn't truly matter at this point so Keith can answer if he chooses...
But what it does do is provide some possibilities in how his timing chain jumped of idler/tensioner gears in the first place... May have led to why his problem occurred due to the idler pins not being held in place properly thus providing the idler gears vertical bouncing in their positions...
Keith, myself & others have been on PM's on this and just couldn't understand how the hell this was possible with a properly tensioned chain...
Brings up another thought.... Keith, when you opened her up, where the dampers still in place?
If not, this also provides the timing component gears to move horizontally in their positions.... :ohmy:
The puzzle pieces are starting to fall into place... Hmmm....
But what it does do is provide some possibilities in how his timing chain jumped of idler/tensioner gears in the first place... May have led to why his problem occurred due to the idler pins not being held in place properly thus providing the idler gears vertical bouncing in their positions...
Keith, myself & others have been on PM's on this and just couldn't understand how the hell this was possible with a properly tensioned chain...
Brings up another thought.... Keith, when you opened her up, where the dampers still in place?
If not, this also provides the timing component gears to move horizontally in their positions.... :ohmy:
The puzzle pieces are starting to fall into place... Hmmm....
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- keith1
-
Topic Author
- Offline
- User
-

Registered
- Posts: 1646
- Thanks: 3
Re: Tore it down a bit.......
24 Jan 2010 07:40 - 24 Jan 2010 07:43
the dampers where fine and everything was where it should be except the chain.shaving them down is something someone here showed/told me about and its a tip on the redline site.....shaving them down helps avoid leaks in that area.....i m sure someone else on here has heard of it.....? as far as the tensioner, i was gonna yank it, but when i was looking around yesterday i stuck a flashlite down in there and when its unsrewed all the way you cant even see it looking down ...i think my problem stemmed from not backing it ALL the way when i reset cams and/or overzealous tightening of the chain with tensioner....
Last edit: 24 Jan 2010 07:43 by keith1.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
