1977 KZ650 Cam End Plug question

  • petunia76
  • petunia76's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • 81 KZ1000 76 KZ750 Twin..77 KZ650 4
  • Posts: 11
  • Thanks: 0

1977 KZ650 Cam End Plug question

22 Dec 2009 18:51
#340332
Hello its me back again with another possibly simple minded quesion. I think my cams are okay he rides and drives like a madman! Anyway the cam end plugs (well a couple of them ) are cracked a little and i want to replace. When I call dealers they tell me you have to buy whole cam? I haven't taken the valve cover off yet and just recently got me a clymers manual. I am watching a couple factory Kaw manuals. I see sellers on ebay selling just the end plugs so finally to my big question.....DO I have to removed the cams to replace these plugs ,or is it just simple remove valve cover pop off the plugs and put the new ones in? Thanks again in advance
1976 KZ750B Twin, 1977 KZ650B,1981 KZ550

Please Log in or Create an account to join the conversation.

  • 650ed
  • 650ed's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 15334
  • Thanks: 2832

Re: 1977 KZ650 Cam End Plug question

22 Dec 2009 19:20
#340339
No biggey. Just remove the valve cover, pull out the old rubber plugs, dry any oil from where the plugs sit in the head, and put in the new ones. I don't use any sealant on mine and they don't leak. You may want to have a new valve cover gasket handy in case you damage the old one removing the cover. While you have the cover off it would be a good time to check the valve clearances. Personally, I would wait until I had the factory service manual so you're sure about how to check the valve clearances properly. Checking the valves is easy, but there is a specific way to do it correctly. Also, you should use a small scale torque wrench to make sure you don't strip any of the 2 dozen valve cover screw holes. The service manual gives the proper torque values. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

  • petunia76
  • petunia76's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • 81 KZ1000 76 KZ750 Twin..77 KZ650 4
  • Posts: 11
  • Thanks: 0

Re: 1977 KZ650 Cam End Plug question

22 Dec 2009 21:12
#340350
Thank you Ed I was hoping someone would say I didn't need to replace cams as well! The Clymer books are good,but I would feel better with factory manual. I have one for my KZ750. I planned on getting new valve cover gasket just because. The valve clearance thing is kind of scary but "Griffon" (that's his name) is laid up for the winter anyway, so if I take my time I should be okay
1976 KZ750B Twin, 1977 KZ650B,1981 KZ550

Please Log in or Create an account to join the conversation.

  • loudhvx
  • loudhvx's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 10863
  • Thanks: 1622

Re: 1977 KZ650 Cam End Plug question

22 Dec 2009 23:49 - 22 Dec 2009 23:50
#340363
Correct me if I'm wrong, but don't the cam end plugs have a metal core to them? If so, and they aren't leaking, it's really just a cosmetic thing, right? The cracking, that is. If they are cracked (as some of mine are starting) they won't necessarily lstart leaking, right?
Last edit: 22 Dec 2009 23:50 by loudhvx.

Please Log in or Create an account to join the conversation.

  • 650ed
  • 650ed's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 15334
  • Thanks: 2832

Re: 1977 KZ650 Cam End Plug question

23 Dec 2009 05:58
#340373
loudhvx wrote:
Correct me if I'm wrong, but don't the cam end plugs have a metal core to them? If so, and they aren't leaking, it's really just a cosmetic thing, right? The cracking, that is. If they are cracked (as some of mine are starting) they won't necessarily lstart leaking, right?

The KZ650 cam plugs are all rubber.
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

  • loudhvx
  • loudhvx's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 10863
  • Thanks: 1622

Re: 1977 KZ650 Cam End Plug question

23 Dec 2009 09:16
#340400
Thanks Ed, good to know.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum