750 4 Engine Rebuild Info?
- TattooMark
-
Topic Author
- Offline
- User
-

Registered
- Posts: 5
- Thanks: 0
750 4 Engine Rebuild Info?
10 Jan 2010 18:24
Does anyone have any info on rebuilding a 750 4? Maybe places to get parts... where to find the best prices... maybe a walkthrough... anything will help. I have really low compression, somewhere around 80psi in one and four and 40psi in two and three so I figure I will just rebuild it and not have to worry about other stuff down the road... Thanks
Please Log in or Create an account to join the conversation.
- TerryK
-
- Offline
- User
-

Registered
- Posts: 607
- Thanks: 2
Re: 750 4 Engine Rebuild Info?
10 Jan 2010 18:42
Have you checked the valve lash? It's possible a simple shim adjustment will bring your compression back up.
1977 KZ1000
GSXR swingarm and rear brake
WM6 rear Akront rim
Wiseco 1075c pistons
33 smoothbores
stage 3 Web Cams
Head porting
Dyna S ignition
Lockhart oil cooler
Wiseco header
1980 Z1R drag bike
1200cc
38 Flatslides, .
500' cams
7" slick
Dyan 4000 SP ignition
etc
Ontario, Canada
GSXR swingarm and rear brake
WM6 rear Akront rim
Wiseco 1075c pistons
33 smoothbores
stage 3 Web Cams
Head porting
Dyna S ignition
Lockhart oil cooler
Wiseco header
1980 Z1R drag bike
1200cc
38 Flatslides, .
500' cams
7" slick
Dyan 4000 SP ignition
etc
Ontario, Canada
Please Log in or Create an account to join the conversation.
- Bluemeanie
-
- Offline
- User
-

Registered
- Posts: 2516
- Thanks: 15
Re: 750 4 Engine Rebuild Info?
11 Jan 2010 05:49 - 11 Jan 2010 05:50
TattooMark wrote:
When you did the compression test, did you have all plugs out and throttle wide open? Also, squirt a little oil in cylinder and repeat test. If it goes up it's your rings. If it stays the same it's in your valves (or valve adjustment as TerryK says) Let us know...
Does anyone have any info on rebuilding a 750 4? Maybe places to get parts... where to find the best prices... maybe a walkthrough... anything will help. I have really low compression, somewhere around 80psi in one and four and 40psi in two and three so I figure I will just rebuild it and not have to worry about other stuff down the road... Thanks
When you did the compression test, did you have all plugs out and throttle wide open? Also, squirt a little oil in cylinder and repeat test. If it goes up it's your rings. If it stays the same it's in your valves (or valve adjustment as TerryK says) Let us know...
1980 KZ650F1, Bought new out the door for $2,162.98!
Last edit: 11 Jan 2010 05:50 by Bluemeanie.
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: 750 4 Engine Rebuild Info?
11 Jan 2010 16:26
Valves is the most likely culprit. Either clearance too tight or they need to be lapped and ground.
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
