Cam timing for turbo setup?
- muskwa
-
Topic Author
- Offline
- User
-

Registered
- Posts: 13
- Thanks: 0
Cam timing for turbo setup?
30 Jan 2010 15:41
1980 1015cc stock compression and cams. What cam timing should I install them at? I've read where wider is better for boosted applications...
Please Log in or Create an account to join the conversation.
- muskwa
-
Topic Author
- Offline
- User
-

Registered
- Posts: 13
- Thanks: 0
Re: Cam timing for turbo setup?
08 Feb 2010 14:48
I found the following on KZzone tech tips...
Turbo Engine Timing
Turbo bikes under boost create a tremendous intake charge. In order to release this charge the exhaust must stay open longer than usual. Suzuki and Kawasaki engines benefit greatly when exhaust cams are set at 112 degrees lobe centers. Set ignition timing at 28 degrees.
Sooo, any suggestions for the intake lobe center? 112 degrees as well, so as to avoid blowing all of the intake charge out the exhaust? Somebody out there must have played around with this...
TIA,
Gavin
Turbo Engine Timing
Turbo bikes under boost create a tremendous intake charge. In order to release this charge the exhaust must stay open longer than usual. Suzuki and Kawasaki engines benefit greatly when exhaust cams are set at 112 degrees lobe centers. Set ignition timing at 28 degrees.
Sooo, any suggestions for the intake lobe center? 112 degrees as well, so as to avoid blowing all of the intake charge out the exhaust? Somebody out there must have played around with this...
TIA,
Gavin
Please Log in or Create an account to join the conversation.
- martijn
-
- Offline
- User
-

Registered
- Posts: 160
- Thanks: 1
Re: Cam timing for turbo setup?
13 Feb 2010 12:43
accordig to megacycle
470-x26
intake .355" 232° 110° Mild turbo profile. 6 btc/46 abc .005"
exhaust .355" 232° 110° 46 bbc/ 6 atc .006"
470-x26
intake .355" 232° 110° Mild turbo profile. 6 btc/46 abc .005"
exhaust .355" 232° 110° 46 bbc/ 6 atc .006"
Please Log in or Create an account to join the conversation.
- Samwell
-
- Offline
- User
-

Registered
- Posts: 260
- Thanks: 1
Re: Cam timing for turbo setup?
28 Feb 2010 10:51
muskwa wrote:
When I read through this, I assumed it was 112 for exhaust and 110 for intake. This is what I have mine set at. The turbo kit is officially in the mail, so I'll let you know how it works out for me.
I found the following on KZzone tech tips...
Turbo Engine Timing
Turbo bikes under boost create a tremendous intake charge. In order to release this charge the exhaust must stay open longer than usual. Suzuki and Kawasaki engines benefit greatly when exhaust cams are set at 112 degrees lobe centers. Set ignition timing at 28 degrees.
Sooo, any suggestions for the intake lobe center? 112 degrees as well, so as to avoid blowing all of the intake charge out the exhaust? Somebody out there must have played around with this...
TIA,
Gavin
When I read through this, I assumed it was 112 for exhaust and 110 for intake. This is what I have mine set at. The turbo kit is officially in the mail, so I'll let you know how it works out for me.
--
Current Rides: 2013 BMW R1200GSW, 1972 BMW R75/5
Current Project: 1978 KZ1000A2: Supercrank'd by Falicon, APE studs and nuts, Dyna Green coils, powder coated frame and fenders, Stainless brake lines, dual front discs, pods, Kerker Exhaust, 1075cc with JE pistons
Current Rides: 2013 BMW R1200GSW, 1972 BMW R75/5
Current Project: 1978 KZ1000A2: Supercrank'd by Falicon, APE studs and nuts, Dyna Green coils, powder coated frame and fenders, Stainless brake lines, dual front discs, pods, Kerker Exhaust, 1075cc with JE pistons
Please Log in or Create an account to join the conversation.
- muskwa
-
Topic Author
- Offline
- User
-

Registered
- Posts: 13
- Thanks: 0
Re: Cam timing for turbo setup?
01 Mar 2010 14:05
Thanks for the replies. 110* intake and 112* exhaust it is then...
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
