Exhaust Compatability
- Big_Wheel
-
Topic Author
- Offline
- User
-

Registered
- Posts: 11
- Thanks: 0
Exhaust Compatability
02 Feb 2010 09:42
I have a 1984 KZ750 ltd that has an exhaust leak down right at the 2-into-1 connection. Previous owner did some 'handy' work down there and its pretty hacked. I have a lead on an exhaust from a 1982 KZ750(N1) Spectre exhaust. It looks like it might fit. Does anybody know for sure? Thanks for the help.
Curtis
Curtis
Please Log in or Create an account to join the conversation.
- Mcdroid
-
- Offline
- Sustaining Member
-

Registered
- Gone Kwackers
- Posts: 6909
- Thanks: 530
Re: Exhaust Compatability
02 Feb 2010 09:47
The header pipes will fit...virtually all the 750(4) and 650 models can interchange header pipes...however, where differences exist might be in how the mufflers hang on the frame...you might have to fabricate a different hanger system.
Michael
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
Please Log in or Create an account to join the conversation.
- Big_Wheel
-
Topic Author
- Offline
- User
-

Registered
- Posts: 11
- Thanks: 0
Re: Exhaust Compatability
02 Feb 2010 09:55
Thanks for the help! I am planning on using my header pipes then using the new 2-to-1 junctions I get from the Spectre exhaust. I shouldn't have a problem fabricating new mounts. Thanks again.
Curtis
Curtis
Please Log in or Create an account to join the conversation.
- Mcdroid
-
- Offline
- Sustaining Member
-

Registered
- Gone Kwackers
- Posts: 6909
- Thanks: 530
Re: Exhaust Compatability
02 Feb 2010 10:21
Big_Wheel wrote:
You may have to use the entire Spectre system rather than just portions of it. Mix-and-match between the 1984 and 1982 exhaust systems may not work well.
Thanks for the help! I am planning on using my header pipes then using the new 2-to-1 junctions I get from the Spectre exhaust. I shouldn't have a problem fabricating new mounts. Thanks again.
Curtis
You may have to use the entire Spectre system rather than just portions of it. Mix-and-match between the 1984 and 1982 exhaust systems may not work well.
Michael
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
Please Log in or Create an account to join the conversation.
- T_Dub
-
- Offline
- User
-

Registered
- Posts: 1441
- Thanks: 26
Re: Exhaust Compatability
02 Feb 2010 10:37
Hijack!!
What about using a 1000 exhaust on a 650? How close is the spacing? Do-able?
What about using a 1000 exhaust on a 650? How close is the spacing? Do-able?
1977 KZ650B1
-810cc
-Cavanaugh Racing Head
-Mikuni RS34's
-GPR Muffler
-810cc
-Cavanaugh Racing Head
-Mikuni RS34's
-GPR Muffler
Please Log in or Create an account to join the conversation.
- Mcdroid
-
- Offline
- Sustaining Member
-

Registered
- Gone Kwackers
- Posts: 6909
- Thanks: 530
Re: Exhaust Compatability
02 Feb 2010 11:41
Not do-able
Michael
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
Please Log in or Create an account to join the conversation.
- T_Dub
-
- Offline
- User
-

Registered
- Posts: 1441
- Thanks: 26
Re: Exhaust Compatability
02 Feb 2010 12:05
What makes it not do-able? The spacing is out? Seems strange since the intake spacing is the same.
1977 KZ650B1
-810cc
-Cavanaugh Racing Head
-Mikuni RS34's
-GPR Muffler
-810cc
-Cavanaugh Racing Head
-Mikuni RS34's
-GPR Muffler
Please Log in or Create an account to join the conversation.
- Mcdroid
-
- Offline
- Sustaining Member
-

Registered
- Gone Kwackers
- Posts: 6909
- Thanks: 530
Re: Exhaust Compatability
02 Feb 2010 12:34
T_Dub wrote:
You know, it may be I have not looked at the issue from using a larger cc exhaust on a smaller cc motor. The bends on the 650/750 exhaust prevent the pipes from mating to the 900/1000 head properly...but, the bends on a 900/1000 set of headers are larger (more distance between bends) and so they might fit on a smaller cc motor...hmmm.
What makes it not do-able? The spacing is out? Seems strange since the intake spacing is the same.
You know, it may be I have not looked at the issue from using a larger cc exhaust on a smaller cc motor. The bends on the 650/750 exhaust prevent the pipes from mating to the 900/1000 head properly...but, the bends on a 900/1000 set of headers are larger (more distance between bends) and so they might fit on a smaller cc motor...hmmm.
Michael
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
Please Log in or Create an account to join the conversation.
- T_Dub
-
- Offline
- User
-

Registered
- Posts: 1441
- Thanks: 26
Re: Exhaust Compatability
02 Feb 2010 13:37
Do you mean the distance between the ports and the bottom of the engine?
The reason why I ask is that i have a yosh, presumably from a big engine, and I plan to try to fit it onto my kz650. I'd mock it up on the bike this weekend but the whole bike is sort of in pieces. Maybe I'll bring it into the city and see if HerrDeacon wants to use his 650 for a guinea pig...
The reason why I ask is that i have a yosh, presumably from a big engine, and I plan to try to fit it onto my kz650. I'd mock it up on the bike this weekend but the whole bike is sort of in pieces. Maybe I'll bring it into the city and see if HerrDeacon wants to use his 650 for a guinea pig...
1977 KZ650B1
-810cc
-Cavanaugh Racing Head
-Mikuni RS34's
-GPR Muffler
-810cc
-Cavanaugh Racing Head
-Mikuni RS34's
-GPR Muffler
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
