Is this piston reusable?

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: Is this piston reusable?

08 Feb 2010 23:35 - 08 Feb 2010 23:35
#347359
polkat wrote:
And the clearance (which should be .040~.067mm) is correct at about .050 all around the piston.
Where measured? I remember my pistons (and everyone I have seen) have a taper from top to bottom with the skirt (bottom) being the widest so it has the tightest fit to the cylinder and the top having a lot more clearance.
1979 KZ-750 Twin
Last edit: 08 Feb 2010 23:35 by bountyhunter.

Please Log in or Create an account to join the conversation.

  • polkat
  • polkat's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 513
  • Thanks: 1

Re: Is this piston reusable?

09 Feb 2010 08:51
#347407
yea, it was measured at spots around the bottom as the book suggested. Surprisingly, this piston had the best compression of the set. I can't afford a new piston right now (unemployed and poor) so I'll try the cleanup and see if it works for a while.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum