1075 kit question
- fcat5
-
Topic Author
- Offline
- User
-

Registered
- Posts: 9
- Thanks: 0
1075 kit question
08 Feb 2010 09:14
Alright, i have a stock 900 right now and am gonna order a top end kit for it. My question is can i go 1075 with the stock block without sleeves?? Someone told me i could or can you just go 1015?? Also looking for a set of the old andrews 2x cams if anyone knows of any they want to sell.
Please Log in or Create an account to join the conversation.
- DoubleDub
-
- User
-

Public
- Thanks: 0
Re: 1075 kit question
08 Feb 2010 09:54
I *believe* you need Kz1000 jugs or a resleeve to go 1075cc. But I'll let others correct me....
Please Log in or Create an account to join the conversation.
- Jack
-
- Offline
- User
-

Registered
- Posts: 691
- Thanks: 7
Re: 1075 kit question
08 Feb 2010 10:01
Yes, you'll need a 1015 block to overbore to 1075 cc. 1015 is max overbore in stock 903 cc .sleeves.
79 KZ 1075 MKll
79 KZ 1500 MKll dragbike
Gone but not forgotten:
3 X 73 Z1's
1 X 74 Z1A
1 X 75 Z1B
79 KZ 1500 MKll dragbike
Gone but not forgotten:
3 X 73 Z1's
1 X 74 Z1A
1 X 75 Z1B
Please Log in or Create an account to join the conversation.
- timebomb33
-
- Offline
- User
-

Registered
- Posts: 4277
- Thanks: 10
Re: 1075 kit question
08 Feb 2010 10:57
if your going thru all the trouble of sleeving a block you won't be limited to only a 1075 you could always make the step up to a 1197 kit and still use the stock block for the same kind of price.
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE
I THINK MY POWERBAND BROKE
Please Log in or Create an account to join the conversation.
- DoubleDub
-
- User
-

Public
- Thanks: 0
Re: 1075 kit question
08 Feb 2010 11:02
What does it run to do a re-sleeve typically? I found a set of the 1015cc jugs for a variety of other reasons, but I was curious what the cost was to have this done.
I know, I know, the cost of the sleeve is the least of it....then there's porting, valves, cams, carbs, exhaust, suspension, brakes, tires, rear sets, etc.... but I was just curious.
I know, I know, the cost of the sleeve is the least of it....then there's porting, valves, cams, carbs, exhaust, suspension, brakes, tires, rear sets, etc.... but I was just curious.
Please Log in or Create an account to join the conversation.
- otakar
-
- Offline
- User
-

Registered
- Posts: 5069
- Thanks: 29
Re: 1075 kit question
08 Feb 2010 12:14
You will also have to machine out your crank cases to take the new block and sleeves. This will require complete engine disassembly.
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Please Log in or Create an account to join the conversation.
- otakar
-
- Offline
- User
-

Registered
- Posts: 5069
- Thanks: 29
Re: 1075 kit question
08 Feb 2010 12:20
DoubleDub wrote:
to do everything on your list, you will be into a couple-few thousand dollars. To just bore and piston your stock block will be around $750+/- to re-sleeve would be another $500
What does it run to do a re-sleeve typically? I found a set of the 1015cc jugs for a variety of other reasons, but I was curious what the cost was to have this done.
I know, I know, the cost of the sleeve is the least of it....then there's porting, valves, cams, carbs, exhaust, suspension, brakes, tires, rear sets, etc.... but I was just curious.
to do everything on your list, you will be into a couple-few thousand dollars. To just bore and piston your stock block will be around $750+/- to re-sleeve would be another $500
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Please Log in or Create an account to join the conversation.
- fcat5
-
Topic Author
- Offline
- User
-

Registered
- Posts: 9
- Thanks: 0
Please Log in or Create an account to join the conversation.
- otakar
-
- Offline
- User
-

Registered
- Posts: 5069
- Thanks: 29
Re: 1075 kit question
08 Feb 2010 13:07
If you just want to stay with a 1015 you can get away a bit cheaper. I am quite sure that someone here might have a set of pistons that they took out of their pre 1981 KZ1000 that they will let you have very cheap. All you would do is get new rings for about $80 and have the cylinders bored by Joe Hooper at Pitstop Performance in Orlando. He charges $100 plus postage. [email protected] 407-679-9116. I have had him do a bunch of stuff for me and he is the cheapest and very good. Or you can buy a set of MTC 10.5:1 pistons from him. He will give you the best price possible on them.
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Please Log in or Create an account to join the conversation.
- otakar
-
- Offline
- User
-

Registered
- Posts: 5069
- Thanks: 29
Re: 1075 kit question
08 Feb 2010 13:16 - 08 Feb 2010 13:19
What I would do if I was you is to take that 1015 jug that you bought, and after you remove the top end and old pistons from your engine, see if it fits into your crankcase. Some will and some wont. If it fits than you can have that one bored to a 1075. If you already have that jug than the price would be the same.
Do us a favor; fill out your profile so we know a bit more about you. There might be a member in your area that might be willing and able to help you.
Do us a favor; fill out your profile so we know a bit more about you. There might be a member in your area that might be willing and able to help you.
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Last edit: 08 Feb 2010 13:19 by otakar.
Please Log in or Create an account to join the conversation.
- keith1
-
- Offline
- User
-

Registered
- Posts: 1646
- Thanks: 3
Re: 1075 kit question
08 Feb 2010 14:44
otakar wrote:
i second dealing with joe hooper.....top notch guy with very good prices.....i bought a set of jugs from him alraedy bored to 1075,MTC 10.5 to 1 pistons,piston pins, buttons, base and head gasket..he also put the rings on and did all the specing out and numbered what piston went in what hole......i bought thru ebay and at the time i think the whole deal was 600 bucks......good communication
and a pleasure to deal with.....there are a lot of good
parts/motor/machine guys out there, but i havent dealt with them.....
If you just want to stay with a 1015 you can get away a bit cheaper. I am quite sure that someone here might have a set of pistons that they took out of their pre 1981 KZ1000 that they will let you have very cheap. All you would do is get new rings for about $80 and have the cylinders bored by Joe Hooper at Pitstop Performance in Orlando. He charges $100 plus postage. [email protected] 407-679-9116. I have had him do a bunch of stuff for me and he is the cheapest and very good. Or you can buy a set of MTC 10.5:1 pistons from him. He will give you the best price possible on them.
i second dealing with joe hooper.....top notch guy with very good prices.....i bought a set of jugs from him alraedy bored to 1075,MTC 10.5 to 1 pistons,piston pins, buttons, base and head gasket..he also put the rings on and did all the specing out and numbered what piston went in what hole......i bought thru ebay and at the time i think the whole deal was 600 bucks......good communication
and a pleasure to deal with.....there are a lot of good
parts/motor/machine guys out there, but i havent dealt with them.....
Please Log in or Create an account to join the conversation.
- fordtruck
-
- Offline
- User
-

Registered
- Posts: 323
- Thanks: 6
Re: 1075 kit question
08 Feb 2010 22:07
I sure do like hearing the positive comments about Joe Hooper. He's rebuilding and porting my head right now. I mailed off my cylinder to him this morning to be bored for the 1075 kit.
FYI, he has recently increased the price of a bore and hone to $124. Still way cheaper than anyone else. I checked locally and the cheapest was $200. Joe also sets the end gap on the rings and installs them on the pistons.
I can't wait to get my parts back!
FYI, he has recently increased the price of a bore and hone to $124. Still way cheaper than anyone else. I checked locally and the cheapest was $200. Joe also sets the end gap on the rings and installs them on the pistons.
I can't wait to get my parts back!
'77 KZ1000-MTC 1075 kit. Stage 1 port
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
