1075 kit question
- The Duke
-
- Offline
- User
-

Registered
- Posts: 7
- Thanks: 0
Re: 1075 kit question
19 Aug 2010 17:22
Remember my KZ Brothers, As a business man I hate hearing the words cheap and or great deal,... Cheaper is not always good. Get it done right the first time and you never have to do it again. Quality First.
Please Log in or Create an account to join the conversation.
- mark1122
-
- Offline
- User
-

Registered
- Keep twisting it
- Posts: 5297
- Thanks: 109
Re: 1075 kit question
20 Aug 2010 09:34
Make sure u check the piston to head clearance after u get work done by Joe Hopper, or anyone for thay matter. Others here have had problems.People do make mistakes, so check thing yourself.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: 1075 kit question
20 Aug 2010 17:33
if youre going to the trouble of building an engine id suggest going through the bottem end at the same time ,could save lots of headaches having to split the cases later
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- The Duke
-
- Offline
- User
-

Registered
- Posts: 7
- Thanks: 0
Re: 1075 kit question
07 Oct 2010 20:24
Look on the Web under Dynoman, they have a complete Menu on Kit sizes and whether you'll need sleeves or not. I would just go with new cams and buy everything as a set, to avoid problems. I have a 75 KZ900 and love the way it runs, I'm almost scared to do anything to it. The last one I had was way to hot and was'nt streetable after a while. Now I'm getting the itch for bigger this and that.Good Luck either way.
Please Log in or Create an account to join the conversation.
- APE Jay
-
- User
-

Public
- Thanks: 0
Re: 1075 kit question
08 Oct 2010 10:40Please Log in or Create an account to join the conversation.
- racer54
-
- Offline
- User
-

Registered
- Posts: 1902
- Thanks: 114
Re: 1075 kit question
08 Oct 2010 19:28
Jay...was looking around your new web-site. Lots easier to get around. Good job.
1980 LTD (changed over the years), 1979 LTD (being rebuilt), 1977 KZ turbo and various KZ's in various states of build. KLX110
Please Log in or Create an account to join the conversation.
- Injected
-
- Offline
- User
-

Registered
- Posts: 1838
- Thanks: 1283
Re: 1075 kit question
09 Oct 2010 15:42
My buddy just went from stock 903 to 1015 with stock liners and a good used set of KZ1000 stock pistons... total cost - bore and hone including the pistons was $240. I think that's a pretty decent price.
1978 KZ650B2 w 1197cc Z1 engine
1977 KZ650B1 w 750cc Spectre engine
1979 KZ650C3 w 831cc Hot Rod engine
1978 KZ650C2 w 762cc DFI project
1977 KZ650C1 stock restoration project
1978 KZ650B2 modified project
1977 KZ650B1 w 750cc Spectre engine
1979 KZ650C3 w 831cc Hot Rod engine
1978 KZ650C2 w 762cc DFI project
1977 KZ650C1 stock restoration project
1978 KZ650B2 modified project
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: 1075 kit question
09 Oct 2010 15:52 - 09 Oct 2010 15:53
Injected wrote:
Very decent, provided it passes a leakdown test and runs strong without any unusual noise or oil leaks.
Good Fortune!
My buddy just went from stock 903 to 1015 with stock liners and a good used set of KZ1000 stock pistons... total cost - bore and hone including the pistons was $240. I think that's a pretty decent price.
Very decent, provided it passes a leakdown test and runs strong without any unusual noise or oil leaks.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Last edit: 09 Oct 2010 15:53 by Patton.
Please Log in or Create an account to join the conversation.
- TeK9iNe
-
- Offline
- User
-

Registered
- What did you do!?!
- Posts: 2436
- Thanks: 28
Re: 1075 kit question
09 Oct 2010 18:16
PLUMMEN wrote:
BING-BING-BING-BING-BING!!!!
WAY TOO #$%&ing Brilliant! :laugh:
Basically, if you don't bother doing this, you're a dumb turd :woohoo: :laugh:
if youre going to the trouble of building an engine id suggest going through the bottem end at the same time ,could save lots of headaches having to split the cases later
BING-BING-BING-BING-BING!!!!
WAY TOO #$%&ing Brilliant! :laugh:
Basically, if you don't bother doing this, you're a dumb turd :woohoo: :laugh:
Motorcycle Shop Owner/Operator
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
Please Log in or Create an account to join the conversation.
- TeK9iNe
-
- Offline
- User
-

Registered
- What did you do!?!
- Posts: 2436
- Thanks: 28
Re: 1075 kit question
09 Oct 2010 18:18 - 09 Oct 2010 18:19
Patton wrote:
:laugh: :laugh: Another winner! Dude takes the words right out of my brain!
Injected wrote:My buddy just went from stock 903 to 1015 with stock liners and a good used set of KZ1000 stock pistons... total cost - bore and hone including the pistons was $240. I think that's a pretty decent price.
Very decent, provided it passes a leakdown test and runs strong without any unusual noise or oil leaks.
Good Fortune!
:laugh: :laugh: Another winner! Dude takes the words right out of my brain!
Motorcycle Shop Owner/Operator
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
Last edit: 09 Oct 2010 18:19 by TeK9iNe.
Please Log in or Create an account to join the conversation.
- Injected
-
- Offline
- User
-

Registered
- Posts: 1838
- Thanks: 1283
Re: 1075 kit question
10 Oct 2010 11:57
Those pistons were from a low mileage donor motor that went to a 1327 kit - bought and installed by a motorcycle speed shop.
We knew the guy selling them and the previous owner, otherwise we would have not gone the used route.
Breathed new life into a tired motor - cylinder PSI and leak down are now great.
We knew the guy selling them and the previous owner, otherwise we would have not gone the used route.
Breathed new life into a tired motor - cylinder PSI and leak down are now great.
1978 KZ650B2 w 1197cc Z1 engine
1977 KZ650B1 w 750cc Spectre engine
1979 KZ650C3 w 831cc Hot Rod engine
1978 KZ650C2 w 762cc DFI project
1977 KZ650C1 stock restoration project
1978 KZ650B2 modified project
1977 KZ650B1 w 750cc Spectre engine
1979 KZ650C3 w 831cc Hot Rod engine
1978 KZ650C2 w 762cc DFI project
1977 KZ650C1 stock restoration project
1978 KZ650B2 modified project
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
