valve clearance and lobe height
- scubarod
-
Topic Author
- Offline
- User
-

Registered
- Posts: 53
- Thanks: 0
valve clearance and lobe height
08 Feb 2010 17:37
o.k. guys i have moved past the torgue on the cam bolts and have checked my valve clearance and lobe height.as far as i can tell my lobe height is 1.415 - 1.405 can you tell me how i determine what motor i have(probably a dumb question)i have a kz1000p 2001 yr according to the clymer manual it looks good for an k,or m but i always thought this was a j-motor??i also could not get .001 in or 04mm on one of my valve clearances and i had .003in (.08mm)on 3 and .004in(.10mm)on one,and .0015in(.04mm)on one,.002in(.06mm)on one,.005in(.13mm)on the last one!so i will be moving shims but i noticed on the one with no tolerance a little discoloration but still got 1.414 on the lobe height.
Please Log in or Create an account to join the conversation.
- timebomb33
-
- Offline
- User
-

Registered
- Posts: 4277
- Thanks: 10
Re: valve clearance and lobe height
08 Feb 2010 17:41
how you get the lift measurement is measure the width of the base circle and subtract that from overall height of the cam.
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE
I THINK MY POWERBAND BROKE
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: valve clearance and lobe height
08 Feb 2010 17:55
Here's the low-down on KZ1000 engine models - - -
Click > aperaceparts.com/tech/techkz1000.html
Good Luck!
Click > aperaceparts.com/tech/techkz1000.html
Good Luck!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- scubarod
-
Topic Author
- Offline
- User
-

Registered
- Posts: 53
- Thanks: 0
Re: valve clearance and lobe height
08 Feb 2010 18:07
o.k. well i am a newbe and have no clue on some of that but according to my manual if i measured correctly my lobe height is no good.clymers says 1.449intake and 1.433 exhaust for j model cam lobes.i used a set of calipers and may not have held them correctly?thanks alot for the info! i will recearch some of that while i have my valve cover off.
Please Log in or Create an account to join the conversation.
- timebomb33
-
- Offline
- User
-

Registered
- Posts: 4277
- Thanks: 10
Re: valve clearance and lobe height
08 Feb 2010 18:37
all motors from 1981 on are called j motors but they are set up differently for the different types of chassis standards or what they call the j has the highest lift cams except of course the gpz the spectre , csr , ltd and apperently the cop bike has the lowest lift cams
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE
I THINK MY POWERBAND BROKE
Please Log in or Create an account to join the conversation.
- scubarod
-
Topic Author
- Offline
- User
-

Registered
- Posts: 53
- Thanks: 0
Re: valve clearance and lobe height
08 Feb 2010 21:13
can you tell me the best in your opinion valve shim removal tool!the ones i see do not list my bike yr which is 2001 kz1000p?
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
