Good piston ring land solvent?

  • polkat
  • polkat's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 513
  • Thanks: 1

Good piston ring land solvent?

12 Feb 2010 22:47 - 12 Feb 2010 22:50
#347981
My 750-4 pistons were well covered with carbon when I tore the engine apart. I cleaned them up and they look pretty good.

However, while the new compression rings fit, they fit a bit tightly (they are the right rings), and the clearance seems minimal (a little smaller then it should be). I had cleaned the ring lands with a broken ring (cheap approach but usually works), but I can still see a lot of what looks like carbon/varnish on the flats inside the lands, which I can't seem to scrape out with the broken ring (and I don't want to grind around in there with it!).

Is there a solvent of some kind that will clean the lands out well, that is safe on aluminum?
Last edit: 12 Feb 2010 22:50 by polkat.

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: Good piston ring land solvent?

12 Feb 2010 22:50 - 12 Feb 2010 22:59
#347982
I use a Berryman's dip tank for cleaning stuff, and it works well on hard burned carbon gunk (if you leave it in a few dys). It's got to be safe for aluminum to dip carburetors, but it will eat most plastics.

You might be able to make a tool out of a popsicle stick that could scrub inside the grooves without damagine the aluminum.
1979 KZ-750 Twin
Last edit: 12 Feb 2010 22:59 by bountyhunter.

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: Good piston ring land solvent?

13 Feb 2010 04:00 - 13 Feb 2010 04:04
#347992
Yamaha Ring Free, available at Yamaha dealerships, enjoys a good reputation. :cheer:

But don't know how effective it might be in this particular situation as a possible carbon solvent for direct application. :unsure:

Click here > Ring Free

Good Luck! :)
1973 Z1
KZ900 LTD
Last edit: 13 Feb 2010 04:04 by Patton.

Please Log in or Create an account to join the conversation.

  • snorules
  • snorules's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 95
  • Thanks: 0

Re: Good piston ring land solvent?

13 Feb 2010 04:17
#347993
I use plain old paint thinner from walmart as solvent. Works like a champ, and it's cheap ($8.00 a gallon). I found an old ceramic coated pot in the storage shed that holds about 2 1/2 gallons. I just rebuilt a Mojave 4-wheeler, I used my makeshift solvent tank to clean the engine parts. The head came spotlessly clean using a toothbrush and the thinner. I soaked the stripped down head for a few minutes, then started scrubbing away. All of the old gunk and carbon deposits came right off, even from the exhaust ports and combustion chamber! After it's clean, blow dry it with compressed air and BAM, done.
1980 KZ550C (daily rider)
1981 KZ1000J (bagger project in progress)
1981 GS1100 (future dragbike)
1978 Z1R (not mine yet, but trying to work out a deal to acquire it).

Please Log in or Create an account to join the conversation.

  • Old Man Rock
  • Old Man Rock's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6071
  • Thanks: 225

Re: Good piston ring land solvent?

13 Feb 2010 07:09
#348020
Question...

Would soaking them in Seafoam work as a solvent cleaner?

Since they work on a running engine to clean carbon build up why wouldn't soaking do the trick as well... Hmmm, me wonder...

OMR
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter

Phoenix, Az

Please Log in or Create an account to join the conversation.

  • APE Jay
  • APE Jay's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: Good piston ring land solvent?

13 Feb 2010 10:20
#348064
Full strength Simple Green.

Please Log in or Create an account to join the conversation.

  • TeK9iNe
  • TeK9iNe's Avatar
  • Offline
  • User
  • User
    Registered
  • What did you do!?!
  • Posts: 2436
  • Thanks: 28

Re: Good piston ring land solvent?

13 Feb 2010 10:33
#348066
Old Man Rock wrote:
Question...

Would soaking them in Seafoam work as a solvent cleaner?

Since they work on a running engine to clean carbon build up why wouldn't soaking do the trick as well... Hmmm, me wonder...

OMR

The seafoam works great with a little fuel as well. :)
Motorcycle Shop Owner/Operator

79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors ;)

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum