kz900 piston/ring options?

  • Galactica
  • Galactica's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 268
  • Thanks: 2

kz900 piston/ring options?

14 Feb 2010 09:31
#348220
I know my 76kz900 A4 needs new piston rings. It runs OK and burns some oil. My plan is to ride it as is until next winter. At that point another newbie will enter Maintenance Land.

I realize that I won't know exactly the extent of the engine work required until I open it up and inspect and measure the bores etc.

My local Kawasaki shop says that OEM rings are not available. With that in mind, I am seeking the wisdom of KZR members.

If stock size rings are all that is required, what is the quality of aftermarket ones, or are OEM rings available elsewhere?

If boring and new pistons etc. are required, what are my options? I don't want to go the high compression route. I believe the Wiseco 1015 gives 10.5:1.

I see that Z1E has a limited supply of OEM oversize pistons and rings but they are pricey compared to a Wiseco kit which includes pins, clips, and gasket.

Would it be worth while to plan on boring, and stockpile OEM oversize pistons/rings, or are there other low compression options?

Will boring necessitate re-jetting the carbs?

It is a ways off until I so this work, but I am the type of guy that needs to ponder, plan, and procrastinate. Budgeting and saving is part of planning and procrastinating.
77KZ1000
76 KZ900

Please Log in or Create an account to join the conversation.

  • otakar
  • otakar's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 5069
  • Thanks: 29

Re: kz900 piston/ring options?

14 Feb 2010 09:55
#348227
Z1E has the new rings in stock for your stock pistons.
www.z1enterprises.com/detail.aspx?ID=193
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000

Please Log in or Create an account to join the conversation.

  • TeK9iNe
  • TeK9iNe's Avatar
  • Offline
  • User
  • User
    Registered
  • What did you do!?!
  • Posts: 2436
  • Thanks: 28

Re: kz900 piston/ring options?

14 Feb 2010 09:59
#348228
otakar wrote:
Z1E has the new rings in stock for your stock pistons.
www.z1enterprises.com/detail.aspx?ID=193

Blarg! beat me to it... :laugh:

Ditto, Z1 is your best bet.

B)
Motorcycle Shop Owner/Operator

79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors ;)

Please Log in or Create an account to join the conversation.

  • timebomb33
  • timebomb33's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 4277
  • Thanks: 10

Re: kz900 piston/ring options?

14 Feb 2010 10:05
#348230
if you decide to do a re-bore the wiseco 1015 kit works very well the compression is just about perfect for street use. not so high that you'll have detonation problems, that it makes good power on and high enough that engine will make good power with premium pump gas. a win- win situation and the nice thing about is that your still using the stock block so the bike will look stock if your concerened about that
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE

Please Log in or Create an account to join the conversation.

  • Galactica
  • Galactica's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 268
  • Thanks: 2

Re: kz900 piston/ring options?

14 Feb 2010 19:44
#348338
I intend to keep this machine for a LONG time and put a LOT of asphalt under her wheels. To that end, I would prefer to stay away from high octane fuel as long as possible.

I suppose my concern is how long will stock ring sizes and stock oversize pistons be available? Or are there aftermarket low compression units available? Or should I stock pile OEM oversize units while they are still available?

This a difficult question as I won't know exactly what I need until I take it apart. I am concerned about the dwindling parts supply. Will low compression oversize units be available in a years time?

This bike has more than enough power for me as it is.
77KZ1000
76 KZ900

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: kz900 piston/ring options?

14 Feb 2010 20:02
#348341
I see piston/ring sets on Fleabay from time to time.
1979 KZ-750 Twin

Please Log in or Create an account to join the conversation.

  • ArthurGoVroom
  • ArthurGoVroom's Avatar
  • Offline
  • User
  • User
    Registered
  • I'd rather ride it than shine it
  • Posts: 52
  • Thanks: 0

Re: kz900 piston/ring options?

14 Feb 2010 20:12 - 14 Feb 2010 20:17
#348351
If for some reason replacement rings become unavailable I believe you could have Total Seal make a set of rings for the bike. They have been very good in building ring sets for oddball applications for me. You will need to know the finish bore size, the width of the ring grooves, and the radial depth of the grooves.
1976 KZ900A4, 4-1 header, rear lowering kit, grab bar removed, still shining and painting parts as time permits
Last edit: 14 Feb 2010 20:17 by ArthurGoVroom.

Please Log in or Create an account to join the conversation.

  • MFolks
  • MFolks's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6650
  • Thanks: 541

Re: kz900 piston/ring options?

14 Feb 2010 23:13
#348393
This website should have a lot of Kawasaki parts:
www.excite-webtl.jp/world/english/web/?w...&wb_lp=JAEN&wb_dis=2
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)

Please Log in or Create an account to join the conversation.

  • Galactica
  • Galactica's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 268
  • Thanks: 2

Re: kz900 piston/ring options?

15 Feb 2010 17:18
#348514
Thanks for all the input. Gives me food for thought. Think I'll chew on it for a while, stop obsessing, and worry about it when the time comes.

That Japanese web site is hilarious. Nice stuff though.
77KZ1000
76 KZ900

Please Log in or Create an account to join the conversation.

  • otakar
  • otakar's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 5069
  • Thanks: 29

Re: kz900 piston/ring options?

15 Feb 2010 18:58
#348543
Since those rings that Z1E has, are repros, they should be available indefinitely. If you ask Jeff, he will tell you so. Also realize that Honda Yamaha and Suzuki all use ART pistons, you should be able to get replacement pistons for a very long time.
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum