wiseco 1015 suprise!
- toad
-
Topic Author
- Offline
- User
-

Registered
- Posts: 196
- Thanks: 7
wiseco 1015 suprise!
15 Feb 2010 06:56 - 15 Feb 2010 08:03
I pulled my motor and tore it down out of my kz900 and needless to say I believe I have wiseco pistons 1015.They have a stamp inside 4020 and a w.Is this correct?If so where could I buy a new set of rings for them?Also I only no tolerances for the 900 ,not the 1015.Could someone please tell me the bore to piston tolerance for this application, like how much play would be allowed to consider reusing these because they do appear to be in good shape, a quick measurement and they read 70mm.I also have a stock 900 gasket set or do I have to use the wiseco gaskets.
Sorry for all the questions,thanks for all the help!
Sorry for all the questions,thanks for all the help!
78 kz 1000
wiesco 1015
29mm smoothbores
gs1100 swingarm
gsxr rear
wiesco 1015
29mm smoothbores
gs1100 swingarm
gsxr rear
Last edit: 15 Feb 2010 08:03 by toad.
Please Log in or Create an account to join the conversation.
- Jeff.Saunders
-
- Offline
- Vendor
-

Vendors
- Posts: 1238
- Thanks: 149
Re: wiseco 1015 suprise!
15 Feb 2010 08:04
The key is going to be the age of the Wiseco pistons. Wiseco changed ring groove size over the years.
The current setup has 1mm top, 1.2mm middle, and 2.8mm oil control ring.
The current setup has 1mm top, 1.2mm middle, and 2.8mm oil control ring.
Please Log in or Create an account to join the conversation.
- toad
-
Topic Author
- Offline
- User
-

Registered
- Posts: 196
- Thanks: 7
Re: wiseco 1015 suprise!
15 Feb 2010 08:22 - 15 Feb 2010 08:39
Oh Oh this sounds bad..I'll start measuring
78 kz 1000
wiesco 1015
29mm smoothbores
gs1100 swingarm
gsxr rear
wiesco 1015
29mm smoothbores
gs1100 swingarm
gsxr rear
Last edit: 15 Feb 2010 08:39 by toad.
Please Log in or Create an account to join the conversation.
- Jeff.Saunders
-
- Offline
- Vendor
-

Vendors
- Posts: 1238
- Thanks: 149
Re: wiseco 1015 suprise!
15 Feb 2010 08:31 - 15 Feb 2010 08:31
It can be a problem, or it might not be. For one customer with a very nice set of old Wiseco pistons, he used the top two rings from our 70mm aftermarket oem replacement rings and reused the old oil control rings.
Last edit: 15 Feb 2010 08:31 by Jeff.Saunders.
Please Log in or Create an account to join the conversation.
- toad
-
Topic Author
- Offline
- User
-

Registered
- Posts: 196
- Thanks: 7
Re: wiseco 1015 suprise!
15 Feb 2010 08:43
Using the old oil control rings isn't a big deal then.Or does your replacement rings come with them as well?
78 kz 1000
wiesco 1015
29mm smoothbores
gs1100 swingarm
gsxr rear
wiesco 1015
29mm smoothbores
gs1100 swingarm
gsxr rear
Please Log in or Create an account to join the conversation.
- toad
-
Topic Author
- Offline
- User
-

Registered
- Posts: 196
- Thanks: 7
Re: wiseco 1015 suprise!
15 Feb 2010 09:36 - 15 Feb 2010 09:45
78 kz 1000
wiesco 1015
29mm smoothbores
gs1100 swingarm
gsxr rear
wiesco 1015
29mm smoothbores
gs1100 swingarm
gsxr rear
Last edit: 15 Feb 2010 09:45 by toad.
Please Log in or Create an account to join the conversation.
- Jack
-
- Offline
- User
-

Registered
- Posts: 691
- Thanks: 7
Re: wiseco 1015 suprise!
15 Feb 2010 13:36
Jeff at Z1 seems to have the fix. If not, I've had good luck finding rings for old or oddball pistons including Wiseco & MTC from TotalSeal. You'll need the ring land dimensions as well as the 70mm. bore.
www.totalseal.com
79 KZ 1075 MKll
79 KZ 1500 MKll dragbike
Gone but not forgotten:
3 X 73 Z1's
1 X 74 Z1A
1 X 75 Z1B
79 KZ 1500 MKll dragbike
Gone but not forgotten:
3 X 73 Z1's
1 X 74 Z1A
1 X 75 Z1B
Please Log in or Create an account to join the conversation.
- toad
-
Topic Author
- Offline
- User
-

Registered
- Posts: 196
- Thanks: 7
Re: wiseco 1015 suprise!
15 Feb 2010 17:32 - 15 Feb 2010 17:40
thanks guys, I will also go get the bores measured,what bore to piston measurement would be tolerable for the 1015 anybody?
Or is it the same tolerances as the 903
Or is it the same tolerances as the 903
78 kz 1000
wiesco 1015
29mm smoothbores
gs1100 swingarm
gsxr rear
wiesco 1015
29mm smoothbores
gs1100 swingarm
gsxr rear
Last edit: 15 Feb 2010 17:40 by toad.
Please Log in or Create an account to join the conversation.
- porchev914
-
- Offline
- User
-

Registered
- Whats that? Half of my swingarm is missing?!?!?
- Posts: 2708
- Thanks: 19
Re: wiseco 1015 suprise!
16 Feb 2010 00:07
I'm not sure if Wiseco has changed their aluminum formula, but I just brought home a set of 1075 Wiseco pistons today, and the sticker on the box says .0020" or .051mm. I hope someone with more knowlege of Wiseco pistons can confirm or refute this :dry:
FRANKEN Z!
1978 KZ1000 A2A with 08'Speed Triple SSSA and '06 GSXR1000 front end
1978 KZ1000 A2A with 08'Speed Triple SSSA and '06 GSXR1000 front end
Please Log in or Create an account to join the conversation.
- APE Jay
-
- User
-

Public
- Thanks: 0
Re: wiseco 1015 suprise!
16 Feb 2010 00:35
Wiseco puts .002' on everything. We set 1015s up at .0015" . Youcould get away with running those with up to .003"
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: wiseco 1015 suprise!
16 Feb 2010 01:56 - 16 Feb 2010 02:01
This image was taken 7-12-2008 of my Wiseco 1015cc kit with rings # 2756XC... Fairly newer Wiseco stamps the piston numbers across the domes.
Your pistons look like this one (outside of carbon build up of course)?
Maybe a picture of the cleaned piston would help these guys...
Follow the links to download the Wiseco Piston Ring Catalog...
www.pistons-online.com/
www.wiseco.com/PDFs/Catalogs/CB07/Comp-Rings.pdf
www.wiseco.com/PDFs/Manuals/RingEndGap.pdf
Just a thought...
OMR
Your pistons look like this one (outside of carbon build up of course)?
Maybe a picture of the cleaned piston would help these guys...
Follow the links to download the Wiseco Piston Ring Catalog...
www.pistons-online.com/
www.wiseco.com/PDFs/Catalogs/CB07/Comp-Rings.pdf
www.wiseco.com/PDFs/Manuals/RingEndGap.pdf
Just a thought...
OMR
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Last edit: 16 Feb 2010 02:01 by Old Man Rock.
Please Log in or Create an account to join the conversation.
- toad
-
Topic Author
- Offline
- User
-

Registered
- Posts: 196
- Thanks: 7
Re: wiseco 1015 suprise!
16 Feb 2010 06:40
no mine are not stamped on top but rather there is a stamp inside them on each side of the pin 4020-W
78 kz 1000
wiesco 1015
29mm smoothbores
gs1100 swingarm
gsxr rear
wiesco 1015
29mm smoothbores
gs1100 swingarm
gsxr rear
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
