Shims marked "A"
- ironpan65
-
Topic Author
- Offline
- User
-

Registered
- *UNTOLD*
- Posts: 32
- Thanks: 0
Shims marked "A"
23 Feb 2010 22:43 - 23 Feb 2010 22:46
Moving shims around (900 engine)...I noticed the "A" mark on some of them
Just curious if this is supposed to mean anything:huh: ?
Just curious if this is supposed to mean anything:huh: ?
UNTOLD
Last edit: 23 Feb 2010 22:46 by ironpan65.
Please Log in or Create an account to join the conversation.
- roy-b-boy-b
-
- Offline
- User
-

Registered
- Posts: 3245
- Thanks: 103
Re: Shims marked "A"
24 Feb 2010 04:11
I believe thise are the ones prone to shattering. Roy
1979 LTD Street Fighter.1977 KZ1000
Please Log in or Create an account to join the conversation.
- BSKZ650
-
- Offline
- User
-

Registered
- Posts: 2061
- Thanks: 14
Re: Shims marked "A"
24 Feb 2010 06:22
thought the A was half size,, but I will need to go to the shop and measure mine to see
77 kz650, owned for over 25 years
77 ltd1000, current rider
76 kz900, just waiting
73 z1,, gonna restore this one
piglet, leggero harley davidson
SR, Ride captian, S.E.Texas Patriot Guard Riders.. AKA KawaBob
77 ltd1000, current rider
76 kz900, just waiting
73 z1,, gonna restore this one
piglet, leggero harley davidson
SR, Ride captian, S.E.Texas Patriot Guard Riders.. AKA KawaBob
Please Log in or Create an account to join the conversation.
- RonKZ650
-
- Offline
- User
-

Registered
- Posts: 3719
- Thanks: 252
Re: Shims marked "A"
24 Feb 2010 06:28
No difference.
321,000 miles on KZ's that I can remember. Not going to see any more.
Please Log in or Create an account to join the conversation.
- otakar
-
- Offline
- User
-

Registered
- Posts: 5069
- Thanks: 29
Re: Shims marked
24 Feb 2010 07:04
RonKZ650 wrote:
+1 I concur.
No difference.
+1 I concur.
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Please Log in or Create an account to join the conversation.
- Mcdroid
-
- Offline
- Sustaining Member
-

Registered
- Gone Kwackers
- Posts: 6909
- Thanks: 530
Re: Shims marked
24 Feb 2010 07:13
otakar wrote:
I've measured both (within a size) and there is no difference.
RonKZ650 wrote:No difference.
+1 I concur.
I've measured both (within a size) and there is no difference.
Michael
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
Please Log in or Create an account to join the conversation.
- JakeB
-
- Offline
- User
-

Registered
- Posts: 174
- Thanks: 0
Re: Shims marked "A"
24 Feb 2010 07:24
I just pulled my shims out last night, I have a couple with the 'A' and one that has a 'Y' in front of the number. :huh:
Don't the shims that were prone to breaking have a dimple in them? The 'A' shims that I have don't have any dimples in them.
Don't the shims that were prone to breaking have a dimple in them? The 'A' shims that I have don't have any dimples in them.
1978 Z1-R
Please Log in or Create an account to join the conversation.
- Mcdroid
-
- Offline
- Sustaining Member
-

Registered
- Gone Kwackers
- Posts: 6909
- Thanks: 530
Re: Shims marked
24 Feb 2010 07:35
JakeB wrote:
Y = Yamaha, but will work...Jeff Saunders also mentioned that Ford SHO shims are also 29mm.
I just pulled my shims out last night, I have a couple with the 'A' and one that has a 'Y' in front of the number. :huh:
Don't the shims that were prone to breaking have a dimple in them? The 'A' shims that I have don't have any dimples in them.
Y = Yamaha, but will work...Jeff Saunders also mentioned that Ford SHO shims are also 29mm.
Michael
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Shims marked "A"
24 Feb 2010 09:23 - 24 Feb 2010 09:27
As Roy says, I too have heard that dimpled shims were prone to shattering. And the lower shim in the above posted photo appears to have a dimple.
The FSMs don't seem to mention the dimple issue with either shims or tappets.
My understanding from the 1974 Chilton's Kawasaki 900Z1 manual is that the original tappets (aka buckets) with navel (aka dimple) in tappet/shim mating area (P#12032-004 used up to engine #Z1E-08979) sometimes caused shim fracture, and were replaced with new design tappet P#12032-005, with recommendation to replace all old style tappets and also replace shims used with the old style because the shim may have begun to fracture.
But Chilton doesn't mention dimpled shims. :S
Hoping someone will better clarify this dimple business. Meanwhile, I would avoid shim or bucket with dimple.
Good Luck!
The FSMs don't seem to mention the dimple issue with either shims or tappets.
My understanding from the 1974 Chilton's Kawasaki 900Z1 manual is that the original tappets (aka buckets) with navel (aka dimple) in tappet/shim mating area (P#12032-004 used up to engine #Z1E-08979) sometimes caused shim fracture, and were replaced with new design tappet P#12032-005, with recommendation to replace all old style tappets and also replace shims used with the old style because the shim may have begun to fracture.
But Chilton doesn't mention dimpled shims. :S
Hoping someone will better clarify this dimple business. Meanwhile, I would avoid shim or bucket with dimple.
Good Luck!
1973 Z1
KZ900 LTD
KZ900 LTD
Last edit: 24 Feb 2010 09:27 by Patton.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
