Bumps on Cam Bearings
- JakeB
-
Topic Author
- Offline
- User
-

Registered
- Posts: 174
- Thanks: 0
Bumps on Cam Bearings
24 Feb 2010 07:42
I know there I saw a thread on this same thing somewhere, but I spent almost 2 hours searching for it on here and the archive with no luck. I must suck at using the search function!
Some of my cam bearing inserts have little raised bumps on them. Is this a problem?
Some of my cam bearing inserts have little raised bumps on them. Is this a problem?
1978 Z1-R
Please Log in or Create an account to join the conversation.
- testarossa
-
- Offline
- User
-

Registered
- Attack life, it's only trying to kill you.
- Posts: 3673
- Thanks: 83
Re: Bumps on Cam Bearings
24 Feb 2010 09:23
Jake here's the thread you're looking for:http://kzrider.com/index.php?option=com_kunena&Itemid=116&func=view&catid=11&id=340793
It's my build thread, and I must say that my bearings look exactly like yours. So far, the consensus on here was to re-use them as-is. However, my bumps are raised just like yours. Personally, I'm not comfortable re-using them, so I'll either replace them with an ebay set or buy new. They sure are proud of those little guys. IIRC they are about $7 a peice.
BTW I have the same problem with the search feature, but fortunatly the search nazis aren't too bad here.
It's my build thread, and I must say that my bearings look exactly like yours. So far, the consensus on here was to re-use them as-is. However, my bumps are raised just like yours. Personally, I'm not comfortable re-using them, so I'll either replace them with an ebay set or buy new. They sure are proud of those little guys. IIRC they are about $7 a peice.
BTW I have the same problem with the search feature, but fortunatly the search nazis aren't too bad here.
1978 KZ1000 A2 Click--->Build Thread
2004 ZX-10R
2007 Harley Sportster 1200
2020 Harley Street Glide Special
Angola, IN
2004 ZX-10R
2007 Harley Sportster 1200
2020 Harley Street Glide Special
Angola, IN
Please Log in or Create an account to join the conversation.
- JakeB
-
Topic Author
- Offline
- User
-

Registered
- Posts: 174
- Thanks: 0
Re: Bumps on Cam Bearings
24 Feb 2010 10:02
Thanks, I knew I saw that somewhere!
You said yours were all on the top halves, but mine are mostly on the bottoms. The worst one (pictured above) is one of the intake bottom halves on the left of the motor.
I'm still deciding whether to replace them or not, Z1E has them for $7.50 each or if you buy a set of 16 - $6.50 each, that's still $104 for new ones.
If I do reuse them should I try to sand off the bumps or just put them back in the way they were?
You said yours were all on the top halves, but mine are mostly on the bottoms. The worst one (pictured above) is one of the intake bottom halves on the left of the motor.
I'm still deciding whether to replace them or not, Z1E has them for $7.50 each or if you buy a set of 16 - $6.50 each, that's still $104 for new ones.
If I do reuse them should I try to sand off the bumps or just put them back in the way they were?
1978 Z1-R
Please Log in or Create an account to join the conversation.
- TeK9iNe
-
- Offline
- User
-

Registered
- What did you do!?!
- Posts: 2436
- Thanks: 28
Re: Bumps on Cam Bearings
24 Feb 2010 11:02
Replace, replace, replace...
When in doubt, THROW IT OUT! :laugh:
These bikes are supposed to cost a lotta $$$... :laugh:
GL
These bikes are supposed to cost a lotta $$$... :laugh:
GL
Motorcycle Shop Owner/Operator
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
Please Log in or Create an account to join the conversation.
- testarossa
-
- Offline
- User
-

Registered
- Attack life, it's only trying to kill you.
- Posts: 3673
- Thanks: 83
Re: Bumps on Cam Bearings
24 Feb 2010 11:04 - 24 Feb 2010 11:06
I personally don't like the idea of sanding. If one of those silicon oxide grains gets imbeded in that bearing, then it's gonna eat that cam for lunch. If I were reusing those I would just clean them and re-install. Judging from the witness marks left by your cam, those bumps were the only thing making contact.
Here's one question that still bothers me. Does this engine not rely on those bearings having good fit to maintain oil pressure? Mine are significantly out of round, and I'm used to bearing clearances being measured in the neighborhood of 0.0002" That's not happening on these bearings. I think my bumps were at least 0.005" tall.
Edit: I agree with what tek9ine says. I'm still replacing mine.
Here's one question that still bothers me. Does this engine not rely on those bearings having good fit to maintain oil pressure? Mine are significantly out of round, and I'm used to bearing clearances being measured in the neighborhood of 0.0002" That's not happening on these bearings. I think my bumps were at least 0.005" tall.
Edit: I agree with what tek9ine says. I'm still replacing mine.
1978 KZ1000 A2 Click--->Build Thread
2004 ZX-10R
2007 Harley Sportster 1200
2020 Harley Street Glide Special
Angola, IN
2004 ZX-10R
2007 Harley Sportster 1200
2020 Harley Street Glide Special
Angola, IN
Last edit: 24 Feb 2010 11:06 by testarossa.
Please Log in or Create an account to join the conversation.
- T_Dub
-
- Offline
- User
-

Registered
- Posts: 1441
- Thanks: 26
Re: Bumps on Cam Bearings
24 Feb 2010 11:07
Don't use them whatever you do, they'll throw off the pressure gradient in the oil, and you wont get proper hydrodynamic lubrication. And that will lead to premature wear on your cam journals, and who wants that?
1977 KZ650B1
-810cc
-Cavanaugh Racing Head
-Mikuni RS34's
-GPR Muffler
-810cc
-Cavanaugh Racing Head
-Mikuni RS34's
-GPR Muffler
Please Log in or Create an account to join the conversation.
- BSKZ650
-
- Offline
- User
-

Registered
- Posts: 2061
- Thanks: 14
Re: Bumps on Cam Bearings
24 Feb 2010 13:00
No way would I use those bearings, looks like something went wrong during the mfg process and the chance of them flaking off and getting into the rest of the motor are just too great for my comfort.
small price to pay for new ones now rather than mess up the rest of the motor later
small price to pay for new ones now rather than mess up the rest of the motor later
77 kz650, owned for over 25 years
77 ltd1000, current rider
76 kz900, just waiting
73 z1,, gonna restore this one
piglet, leggero harley davidson
SR, Ride captian, S.E.Texas Patriot Guard Riders.. AKA KawaBob
77 ltd1000, current rider
76 kz900, just waiting
73 z1,, gonna restore this one
piglet, leggero harley davidson
SR, Ride captian, S.E.Texas Patriot Guard Riders.. AKA KawaBob
Please Log in or Create an account to join the conversation.
- testarossa
-
- Offline
- User
-

Registered
- Attack life, it's only trying to kill you.
- Posts: 3673
- Thanks: 83
Re: Bumps on Cam Bearings
24 Feb 2010 13:38
Jake are those bearings from your Z1r? That bike sat up for a few years if I remember your post about it. I'd like to know what causes the bumps and it would help to put 2 and 2 together.
1978 KZ1000 A2 Click--->Build Thread
2004 ZX-10R
2007 Harley Sportster 1200
2020 Harley Street Glide Special
Angola, IN
2004 ZX-10R
2007 Harley Sportster 1200
2020 Harley Street Glide Special
Angola, IN
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: Bumps on Cam Bearings
24 Feb 2010 15:27
If the bumps are thicker than the oil film (and I'm betting they are) they will make contact with the cam journals. Judging by the dark spots in the center of some of the bumps (which look like a sign of wear) they already have been rubbing. I would toss them for sure. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Please Log in or Create an account to join the conversation.
- JakeB
-
Topic Author
- Offline
- User
-

Registered
- Posts: 174
- Thanks: 0
Re: Bumps on Cam Bearings
24 Feb 2010 20:52
Testarossa - Yes, these are from the Z1-R, it did sit for 13 or 14 years. It has about 19,000 miles on it. It seems to make sense that these bumps grew, then as I ran it last summer the tips of the biggest bumps got worn off like 650ed mentioned.
There will be a brand new set in my next order from Z1E.
This might be an important thing to check on any bike that has been sitting for awhile.
There will be a brand new set in my next order from Z1E.
This might be an important thing to check on any bike that has been sitting for awhile.
1978 Z1-R
Please Log in or Create an account to join the conversation.
- Jeff.Saunders
-
- Offline
- Vendor
-

Vendors
- Posts: 1238
- Thanks: 149
Re: Bumps on Cam Bearings
25 Feb 2010 05:58
I've never seen any looking like that. It would seem likely to be some form of contamination in the oil that corroded the metal.
When engines run, they gradually contaminate the oil with acid, water and left over chemicals from gasoline that makes it's way past the rings. I would suspect the engine sat with very old oil in it for all those years.
When engines run, they gradually contaminate the oil with acid, water and left over chemicals from gasoline that makes it's way past the rings. I would suspect the engine sat with very old oil in it for all those years.
Please Log in or Create an account to join the conversation.
- testarossa
-
- Offline
- User
-

Registered
- Attack life, it's only trying to kill you.
- Posts: 3673
- Thanks: 83
Re: Bumps on Cam Bearings
25 Feb 2010 09:38
Jeff.Saunders wrote:
Mine sat for about 15 years with dirty oil in it. Unknown miles, but I'm guessing not too many since the cam lobes were still in spec. It would be interesting to see if any other bikes that have been stored for extended periods have this issue. I have never seen bearings look like this in any engine that I have dissasembled of any type. It makes two KZ motors with this.:huh:
I've never seen any looking like that. It would seem likely to be some form of contamination in the oil that corroded the metal.
When engines run, they gradually contaminate the oil with acid, water and left over chemicals from gasoline that makes it's way past the rings. I would suspect the engine sat with very old oil in it for all those years.
Mine sat for about 15 years with dirty oil in it. Unknown miles, but I'm guessing not too many since the cam lobes were still in spec. It would be interesting to see if any other bikes that have been stored for extended periods have this issue. I have never seen bearings look like this in any engine that I have dissasembled of any type. It makes two KZ motors with this.:huh:
1978 KZ1000 A2 Click--->Build Thread
2004 ZX-10R
2007 Harley Sportster 1200
2020 Harley Street Glide Special
Angola, IN
2004 ZX-10R
2007 Harley Sportster 1200
2020 Harley Street Glide Special
Angola, IN
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
