1075 kit on the way!

  • fordtruck
  • fordtruck's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 323
  • Thanks: 6

1075 kit on the way!

25 Feb 2010 08:47
#350068
I just received an email from Pit Stop Performance that my cylinder is finished being bored and hone and is shipping out today with my pistons!

My cylinder head is next in line to be ported, so it will be a couple more weeks before I get it back. That will give me plenty of time to get the pistons in and the cylinder back on. Can't wait to get it running.
'77 KZ1000-MTC 1075 kit. Stage 1 port

Please Log in or Create an account to join the conversation.

  • keith1
  • keith1's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1646
  • Thanks: 3

Re: 1075 kit on the way!

25 Feb 2010 14:11
#350124
sounds good......put in new camera batteries......there better be pics....B)

Please Log in or Create an account to join the conversation.

  • fordtruck
  • fordtruck's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 323
  • Thanks: 6

Re: 1075 kit on the way!

25 Feb 2010 22:12
#350224
haha. Will do!
'77 KZ1000-MTC 1075 kit. Stage 1 port

Please Log in or Create an account to join the conversation.

  • Old Man Rock
  • Old Man Rock's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6071
  • Thanks: 225

Re: 1075 kit on the way!

26 Feb 2010 04:14
#350235
Ford... What cams are going in your baby?

Keeping the old timing components or going all brand new?
BTW, the LISKA components... Nice..........;)

You already go through and replace all the lower end gaskets and seals?

I'm with the other... Where's our damn pictures... :P :laugh: :laugh: :laugh:

OMR
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter

Phoenix, Az

Please Log in or Create an account to join the conversation.

  • trianglelaguna
  • trianglelaguna's Avatar
  • Offline
  • User
  • User
    Registered
  • New and improved - extra strength
  • Posts: 8019
  • Thanks: 236

Re: 1075 kit on the way!

26 Feb 2010 04:14
#350236
pics and final shipping and cost report too ,would be cool...
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife

Please Log in or Create an account to join the conversation.

  • DoubleDub
  • DoubleDub's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: 1075 kit on the way!

26 Feb 2010 06:01
#350247
Yeah, and what you're planning on running for carbs and cams, too (with costs). //Subscribed//

Please Log in or Create an account to join the conversation.

  • fordtruck
  • fordtruck's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 323
  • Thanks: 6

Re: 1075 kit on the way!

26 Feb 2010 08:25
#350266
OMR, I've already put a new EK cam chain in. All timing components will be new, except for the two upper metal sprockets. They were the only cam chain components that were in good shape.

It's going to be stock cams for a while. I'm not running the normal MTC 10.5:1 pistons. I bought a set that Pit Stop sells that is made for stock or mild cams. The dome height is half that of the normal piston. In the future I may put in Web 118's.

As far as carbs, I'll be running VM28's that I bought off of Roy for a sweet price. Also going to use K&N air pods.

My estimate on total cost was around $1300. That was way low. I haven't added up everything, but I'm guessing closer to $2000. Those damn cam chain components are expensive!!!

In a previous thread I posted pics of the teardown. I'll take more when I start putting it back together.
'77 KZ1000-MTC 1075 kit. Stage 1 port

Please Log in or Create an account to join the conversation.

  • saxjonz
  • saxjonz's Avatar
  • Offline
  • User
  • User
    Registered
  • KawboyZ
  • Posts: 2113
  • Thanks: 76

Re: 1075 kit on the way!

26 Feb 2010 09:49
#350279
Make sure you put an oil cooler on her as she will be running hotter than it is in Grenada. Another little trick that helps the airflow is if you clean up the castings on the head so the air can flow through to the inside unimpeded.. Every little bit helps. If you take a good look at the front of the head you will see the spots I am talking about. It's just a little but a little makes a difference.
79 LTD B3
80 LTD B4 1075 kit JE Pistons .410 cam grind, Bassani, 31 keihin CR Specials...
1980 Z1R, 2002 ZRX1200, 2003 ZRX1200

Please Log in or Create an account to join the conversation.

  • Pfaelzer
  • Pfaelzer's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 68
  • Thanks: 1

Re: 1075 kit on the way!

26 Feb 2010 10:17
#350281
Just had a cylinder head done by Pit-Stop. He seems to do nice work. The only downside is that he is in FLA. Shipping is a killer :angry:
1977 KZ 1000
Queen Creek, Arizona

Please Log in or Create an account to join the conversation.

  • fordtruck
  • fordtruck's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 323
  • Thanks: 6

Re: 1075 kit on the way!

26 Feb 2010 11:33
#350292
Pfaelzer wrote:
Just had a cylinder head done by Pit-Stop. He seems to do nice work. The only downside is that he is in FLA. Shipping is a killer :angry:

Yep. Cost me $25 to ship the head.
'77 KZ1000-MTC 1075 kit. Stage 1 port

Please Log in or Create an account to join the conversation.

  • Pfaelzer
  • Pfaelzer's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 68
  • Thanks: 1

Re: 1075 kit on the way!

26 Feb 2010 13:51
#350300
that's not bad - I paid about $ 100.00 :woohoo:
1977 KZ 1000
Queen Creek, Arizona

Please Log in or Create an account to join the conversation.

  • fordtruck
  • fordtruck's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 323
  • Thanks: 6

Re: 1075 kit on the way!

26 Feb 2010 22:25
#350332
Pfaelzer wrote:
that's not bad - I paid about $ 100.00 :woohoo:

Wow! I used UPS and insured it for $200.
'77 KZ1000-MTC 1075 kit. Stage 1 port

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum