GOING BACK TOGETHER.....

  • Old Man Rock
  • Old Man Rock's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6071
  • Thanks: 225

Re: GOING BACK TOGETHER.....

06 Mar 2010 17:04
#351630
2 Very important things I learned off Larry & Plum on a new build...

With fan full blast aimed at engine:
First start up, no more than 5-10 minutes then shut her completely down and leave her alone till the following day.

Re-torque ALL engine bolts, engine to frame mounts, and head nuts.

First ride, no more then 50 miles or so, don't baby her but don't run her WOT either.... Now this is mostly for rings seating and such but you have new valves and head components you want to work as well....

Don't worry about carb jetting due to P&P yet... just run her for the time being... Sure, adjust your idle but nothing more....

Ride her home and let her sit over night (complete cool down). ;)

Now you'll be real surprised how many bolts and nuts came lose.... Re-torque everything all again...

Keep an eye on the timing chain adjuster, no overkill this time.... :P

As for the Liska top idler, once everything breaks in and you switch over to synthetic she'll quite down nicely...;)

Congrats brother...
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter

Phoenix, Az

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: GOING BACK TOGETHER.....

06 Mar 2010 17:13
#351632
keith1 wrote:
testarossa wrote:
Keith,
I see your current ride in the background of that last pic.:laugh: But seriously, looks good! I wish that I could say I'll have a runner this week. BTW, where did those motor mounts come from?

sorry missed your ? the first time....they came with the bike....

Perhaps aftermarket cruise peg brackets.
Have enjoyed mine for many years. See image below.
Heavenly comfort during long hauls.
Also enables enough stretch-out to nap or sip while sitting on parked bike, leaning against pack and sissy bar.
May add some light duty case protection.

Am also admiring the braided oil cooler lines on keith's engine.

Good Fortune! :)

[Click on image for better view.]

1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: GOING BACK TOGETHER.....

06 Mar 2010 17:33 - 06 Mar 2010 17:37
#351636
Here's the port side of Z1 with same cruise peg setup.

Would sure miss being without 'em on anything other than a short ride.

Good Fortune! :)

[Click on image to improve view.]

1973 Z1
KZ900 LTD
Last edit: 06 Mar 2010 17:37 by Patton.

Please Log in or Create an account to join the conversation.

  • Kawboy74
  • Kawboy74's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 342
  • Thanks: 66

Re: GOING BACK TOGETHER.....

06 Mar 2010 17:59
#351642
Nice job Keith, a very familiar looking ride! I know it will be warm this weekend down here but I hope you are not taking it out in the salt just yet! Nice job eh! David
1974 Z1A As original as I could get it
'88 ZX750R braided lines, mostly original
KZ1000 project on the bench
Burlington,Ontario,Canada

Please Log in or Create an account to join the conversation.

  • keith1
  • keith1's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 1646
  • Thanks: 3

Re: GOING BACK TOGETHER.....

06 Mar 2010 18:05
#351644
Old Man Rock wrote:
2 Very important things I learned off Larry & Plum on a new build...

With fan full blast aimed at engine:
First start up, no more than 5-10 minutes then shut her completely down and leave her alone till the following day.

Re-torque ALL engine bolts, engine to frame mounts, and head nuts.

First ride, no more then 50 miles or so, don't baby her but don't run her WOT either.... Now this is mostly for rings seating and such but you have new valves and head components you want to work as well....

Don't worry about carb jetting due to P&P yet... just run her for the time being... Sure, adjust your idle but nothing more....

Ride her home and let her sit over night (complete cool down). ;)

Now you'll be real surprised how many bolts and nuts came lose.... Re-torque everything all again...

Keep an eye on the timing chain adjuster, no overkill this time.... :P

As for the Liska top idler, once everything breaks in and you switch over to synthetic she'll quite down nicely...;)

Congrats brother...



dave,
i pre-lubed like you would do.....lubed everything and did it again......i ran it for about 20 mins with a fan 20 ft away to blow everything outside...oil temp got to 140......i know from past experience besides the head bolts, the valve cover bolts will be loosey goosey and the exhaust flanges will need tightened...i have a list going of stuff to look at tommorow....i usually have a helping hand, but today was a solo job.....if i decide to keep working on bikes and gaining skills, i m going to have to invest in a bike lift...being 6-5 260 isnt helping my back and knees working on stuff 3 ft off the ground....:laugh:

Please Log in or Create an account to join the conversation.

  • keith1
  • keith1's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 1646
  • Thanks: 3

Re: GOING BACK TOGETHER.....

06 Mar 2010 18:08
#351645
Kawboy74 wrote:
Nice job Keith, a very familiar looking ride! I know it will be warm this weekend down here but I hope you are not taking it out in the salt just yet! Nice job eh! David



thanks my B2 ebony bro....B)

Please Log in or Create an account to join the conversation.

  • trianglelaguna
  • trianglelaguna's Avatar
  • Offline
  • User
  • User
    Registered
  • New and improved - extra strength
  • Posts: 8019
  • Thanks: 236

Re: GOING BACK TOGETHER.....

06 Mar 2010 18:21
#351651
hey patton ...could you get someone to take a shot of you showing us how well those pegs work??? i have never seen em before and i don't really get it..you sit where?.Patton wrote:
Here's the port side of Z1 with same cruise peg setup.

Would sure miss being without 'em on anything other than a short ride.

Good Fortune! :)

[Click on image to improve view.]

1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife

Please Log in or Create an account to join the conversation.

  • keith1
  • keith1's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 1646
  • Thanks: 3

Re: GOING BACK TOGETHER.....

06 Mar 2010 18:26
#351654
Patton wrote:
Here's the port side of Z1 with same cruise peg setup.

Would sure miss being without 'em on anything other than a short ride.

Good Fortune! :)

[Click on image to improve view.]



ya learn something new everyday....i was thinking they were
part of an old case guard set-up.......all i know is they were free chrome:laugh:

Please Log in or Create an account to join the conversation.

  • larrycavan
  • larrycavan's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: GOING BACK TOGETHER.....

06 Mar 2010 18:41
#351658
Awesome Keith!

Be careful on your ride :)

Please Log in or Create an account to join the conversation.

  • Link14
  • Link14's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 575
  • Thanks: 6

Re: GOING BACK TOGETHER.....

06 Mar 2010 18:47
#351660
Old Man Rock wrote:
Re-torque ALL engine bolts, engine to frame mounts, and head nuts.

Hey OMR, when you re-torque, do you loosen then tighten, or just check the existing torque?

Thanks!

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: GOING BACK TOGETHER.....

06 Mar 2010 18:50
#351662
trianglelaguna wrote:
...those pegs...I have never seen em before and i don't really get it..sit where?

[Click on image to watch rider park and fall asleep.]






[Sorry, keith.]

Good Fortune! :)
1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

  • keith1
  • keith1's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 1646
  • Thanks: 3

Re: GOING BACK TOGETHER.....

06 Mar 2010 19:04
#351665
Patton wrote:
trianglelaguna wrote:
...those pegs...I have never seen em before and i don't really get it..sit where?

[Click on image to watch rider park and fall asleep.]






[Sorry, keith.]

Good Fortune! :)


craig looks like he s been on the crack pipe...losing weight bigtime.....:laugh:

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum