GOING BACK TOGETHER.....
- keith1
-
Topic Author
- Offline
- User
-

Registered
- Posts: 1646
- Thanks: 3
Re: GOING BACK TOGETHER.....
06 Mar 2010 19:05
larrycavan wrote:
Will do....thanks again....you have an email....
Awesome Keith!
Be careful on your ride
Will do....thanks again....you have an email....
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: GOING BACK TOGETHER.....
07 Mar 2010 05:58 - 07 Mar 2010 06:01
"Hey OMR, when you re-torque, do you loosen then tighten, or just check the existing torque?"...
Cold motor, just re-torque (specified sequence) from where they are....
Keith (500 miles), check shim to valve clearances... Me, being a nervous sissy checked at 200 miles... :blush: and I was glad I did due to exhaust valve #1 issue as mentioned to you.
NOTE: This had nothing to do with Larry's craftsmanship... As posted, was the camshaft/bearing wear itself
You ran her for 20 minutes... Oh no, :ohmy: you totally destroyed her... Now she's a junk POS, :ohmy: I'll take that beauty off your hands for $300... Send her to me...
:laugh: :laugh: :laugh: :laugh: You pay crate & shipping fees.. OK? :laugh: :laugh: :laugh:
Oh BTW, hell as big as you are, just lift her onto your bench....
Way to go big man, freaking beautiful!
Cold motor, just re-torque (specified sequence) from where they are....
Keith (500 miles), check shim to valve clearances... Me, being a nervous sissy checked at 200 miles... :blush: and I was glad I did due to exhaust valve #1 issue as mentioned to you.
NOTE: This had nothing to do with Larry's craftsmanship... As posted, was the camshaft/bearing wear itself
You ran her for 20 minutes... Oh no, :ohmy: you totally destroyed her... Now she's a junk POS, :ohmy: I'll take that beauty off your hands for $300... Send her to me...
:laugh: :laugh: :laugh: :laugh: You pay crate & shipping fees.. OK? :laugh: :laugh: :laugh:
Oh BTW, hell as big as you are, just lift her onto your bench....
Way to go big man, freaking beautiful!
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Last edit: 07 Mar 2010 06:01 by Old Man Rock.
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: GOING BACK TOGETHER.....
07 Mar 2010 06:14
When you get a chance from riding her... :woohoo: can you get some clean zoomed up shots of your cooler mounting and line feeds (coupling) into the engine cases...
Love it, looks killer...
Thanks,
OMR
Love it, looks killer...
Thanks,
OMR
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- keith1
-
Topic Author
- Offline
- User
-

Registered
- Posts: 1646
- Thanks: 3
Re: GOING BACK TOGETHER.....
07 Mar 2010 12:42
will do...its nothing fancy with the braided....i took it for a mile or two down the road today.....i stayed below 5k and it ran well.....i think i will recheck my chain tension now that it has been run cause its either that or the liska
sprocket or a little of both sounds like real crap....
sprocket or a little of both sounds like real crap....
Please Log in or Create an account to join the conversation.
- keith1
-
Topic Author
- Offline
- User
-

Registered
- Posts: 1646
- Thanks: 3
- larrycavan
-
- User
-

Public
- Thanks: 0
Re: GOING BACK TOGETHER.....
09 Mar 2010 05:24
The Liska top idler on my engine has not proven to be noisey at all. I've heard guys mention they are sometimes...
Please Log in or Create an account to join the conversation.
- keith1
-
Topic Author
- Offline
- User
-

Registered
- Posts: 1646
- Thanks: 3
Re: GOING BACK TOGETHER.....
09 Mar 2010 06:55
being very aware of the problems of overtightening on chain tension, i am going to tighten it up a little...
Please Log in or Create an account to join the conversation.
- keith1
-
Topic Author
- Offline
- User
-

Registered
- Posts: 1646
- Thanks: 3
Re: GOING BACK TOGETHER.....
09 Mar 2010 13:39 - 09 Mar 2010 13:44
cam chain loose as a goose!!! all set.....c'mon warm weather.....
putting up a short vid tonite....
putting up a short vid tonite....
Last edit: 09 Mar 2010 13:44 by keith1.
Please Log in or Create an account to join the conversation.
- keith1
-
Topic Author
- Offline
- User
-

Registered
- Posts: 1646
- Thanks: 3
Please Log in or Create an account to join the conversation.
- will61310
-
- Offline
- User
-

Registered
- Posts: 274
- Thanks: 6
Re: GOING BACK TOGETHER.....
09 Mar 2010 13:58
Glad you're up and running again...
...1980 LTD 1000...
Please Log in or Create an account to join the conversation.
- keith1
-
Topic Author
- Offline
- User
-

Registered
- Posts: 1646
- Thanks: 3
Re: GOING BACK TOGETHER.....
09 Mar 2010 14:01
will61310 wrote:
Thanks....been a long road....camera picked up an exhaust leak i didnt hear....#3 clamp isnt straight...minor...:laugh:
Glad you're up and running again...
Thanks....been a long road....camera picked up an exhaust leak i didnt hear....#3 clamp isnt straight...minor...:laugh:
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: GOING BACK TOGETHER.....
09 Mar 2010 17:29
:woohoo: :woohoo: :woohoo: Way to go big man! 
And that old girl is just freaking beautiful!
And that old girl is just freaking beautiful!
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
