Minimum ring gap?

  • polkat
  • polkat's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 513
  • Thanks: 1

Minimum ring gap?

18 Mar 2010 20:34
#354436
'82 KZ750 four. The book says that the maximum piston ring gap is .7mm but gives no measurement for the minimum gap. I know that if the gap is too small, the rings can lock to the bores when they heat up. Mine range from .53mm to .58mm. Am I okay?

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: Minimum ring gap?

18 Mar 2010 21:54
#354452
The rule I read when I researched this is you need at least .003" - .004" for each inch of bore diameter. In other words, if the piston is 3" diameter, the minimum ring end gap would be .009" - .012".

"Mine range from .53mm to .58mm. Am I okay? "

If my math is right that's about .021" - .023" which should be more than enough.
1979 KZ-750 Twin

Please Log in or Create an account to join the conversation.

  • timebomb33
  • timebomb33's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 4277
  • Thanks: 10

Re: Minimum ring gap?

19 Mar 2010 18:12
#354651
polkat as bountyhunter has said they look like they would be still decent to reuse right in the middle of the spec. and i use the .003-.004" per inch of bore rule myself.
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE

Please Log in or Create an account to join the conversation.

  • polkat
  • polkat's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 513
  • Thanks: 1

Re: Minimum ring gap?

19 Mar 2010 19:46
#354695
Got it. Thanks guys!

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum