Sprocket Cover Stuck?
- rellump
-
Topic Author
- Offline
- User
-

Registered
- Posts: 3
- Thanks: 0
Sprocket Cover Stuck?
20 Mar 2010 01:05
Hi, I've got a 1980 KZ550 and I'm trying to replace the clutch cable but the sprocket cover doesn't want to come off. I've removed the foot peg, shift pedal and the starter motor cover. However, after taking out the four bolts securing the sprocket cover...it doesn't come off. It seems "stuck" along the bottom. Even a little gentle prying doesn't seem to help. This is a very low mile bike and it's possible that the cover has never been off. Should I try pounding it with a rubber mallet?
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Sprocket Cover Stuck?
20 Mar 2010 03:38
Or perhaps a dead blow hammer. In any event, would use a leather pad to avoid marring the cover.
Good Fortune!
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- timebomb33
-
- Offline
- User
-

Registered
- Posts: 4277
- Thanks: 10
Re: Sprocket Cover Stuck?
20 Mar 2010 11:33
make double sure you have all the bolts out. also they are located with dowel pins so sometimes they will partially seize in place be gentle it will come.
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE
I THINK MY POWERBAND BROKE
Please Log in or Create an account to join the conversation.
- rellump
-
Topic Author
- Offline
- User
-

Registered
- Posts: 3
- Thanks: 0
Re: Sprocket Cover Stuck?
21 Mar 2010 16:28
Hey thanks guys....good advice....with a little persuasion the cover came off. It was the gunked up dowels that were the problem.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
