Bad news maybe
- kawasakibikefan
-
Topic Author
- Offline
- User
-

Registered
- Riding is a passion most do not understand.
- Posts: 54
- Thanks: 0
Bad news maybe
20 Mar 2010 17:53
Well I found a crack in my oil pan right by the oil drain. No oil is leaking out of it. Should JB-Weld be good enough for it? It is pretty small.
'75 Z1B
'95 KLR250
My Future Buying List:
-Kawasaki KLX450R
-Yamaha R1
-Suzuki DR-Z400SM
'95 KLR250
My Future Buying List:
-Kawasaki KLX450R
-Yamaha R1
-Suzuki DR-Z400SM
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Bad news maybe
20 Mar 2010 17:57
Due to low pressure, should be ok...
Downfall is going to be totally cleaning the area for ideal adhesion....
Just my 2 shizacentsworth....
OMR
Downfall is going to be totally cleaning the area for ideal adhesion....
Just my 2 shizacentsworth....
OMR
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- keith1
-
- Offline
- User
-

Registered
- Posts: 1646
- Thanks: 3
Re: Bad news maybe
20 Mar 2010 19:08
this kind of situation is what that stuff is ideal for....
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: Bad news maybe
20 Mar 2010 20:00
are you sure its a crack and not just a rough casting?
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- timebomb33
-
- Offline
- User
-

Registered
- Posts: 4277
- Thanks: 10
Re: Bad news maybe
20 Mar 2010 20:02
lots of guys have cracks in there oil pans filled with jb weld comes from jumping to many curbs i think.
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE
I THINK MY POWERBAND BROKE
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Bad news maybe
20 Mar 2010 20:22
Nose wheelies at that...:blink:
Granted you sated small crack but one other option would work really well... Aluminum brazing rod.... Worked on my engine cases so should work on an oil pan no problem....
Just a thought, JB Weld would be easier no doubt...
Granted you sated small crack but one other option would work really well... Aluminum brazing rod.... Worked on my engine cases so should work on an oil pan no problem....
Just a thought, JB Weld would be easier no doubt...
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- TeK9iNe
-
- Offline
- User
-

Registered
- What did you do!?!
- Posts: 2436
- Thanks: 28
Re: Bad news maybe
20 Mar 2010 21:36
Slap a new pan on.
:laugh:
:laugh:
Motorcycle Shop Owner/Operator
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
Please Log in or Create an account to join the conversation.
- Bad Dad
-
- Offline
- User
-

Registered
- Posts: 195
- Thanks: 0
Re: Bad news maybe
20 Mar 2010 22:02
TeK9iNe wrote:
Or just another (probably what teK9iNe meant) one on. They can be found pretty cheap on ebay. I've used JB Weld on snowmobile cases, with very good luck. Like it was said... this is what it was made for!
Slap a new pan on.
:laugh:
Or just another (probably what teK9iNe meant) one on. They can be found pretty cheap on ebay. I've used JB Weld on snowmobile cases, with very good luck. Like it was said... this is what it was made for!
76 KZ900LTD
82 GPz750R1
01 VULCAN 800A-CHOPPED
76 IRONHEAD-CHOPPED
77 RD 400 Cafe
82 GPz750R1
01 VULCAN 800A-CHOPPED
76 IRONHEAD-CHOPPED
77 RD 400 Cafe
Please Log in or Create an account to join the conversation.
- kawasakibikefan
-
Topic Author
- Offline
- User
-

Registered
- Riding is a passion most do not understand.
- Posts: 54
- Thanks: 0
Re: Bad news maybe
21 Mar 2010 16:37
good stuff. it wasnt leaking oil so it wasnt like anything major. i would just not prefer to one day see an oil spot under the bike.
ps i can not seem to post any pictures up. everytime i try it says the pixels is too much.
ps i can not seem to post any pictures up. everytime i try it says the pixels is too much.
'75 Z1B
'95 KLR250
My Future Buying List:
-Kawasaki KLX450R
-Yamaha R1
-Suzuki DR-Z400SM
'95 KLR250
My Future Buying List:
-Kawasaki KLX450R
-Yamaha R1
-Suzuki DR-Z400SM
Please Log in or Create an account to join the conversation.
- timebomb33
-
- Offline
- User
-

Registered
- Posts: 4277
- Thanks: 10
Re: Bad news maybe
21 Mar 2010 17:22
if you are going to use jb weld take the pan off and doit from the inside rough it up real good so it gives it some thing to bite into. and then no one will ever know unless the pull the pan. or replace it.
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE
I THINK MY POWERBAND BROKE
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Bad news maybe
21 Mar 2010 21:28 - 22 Mar 2010 11:49
kawasakibikefan wrote:
Am thinking width (horizontal) is limited to 2400 pixels and height (vertical) is limited to 1200 pixels. With overall size limited to 200kb.
Placing mouse pointer on the pic (without clicking) might show the size info.
Good Fortune!
good stuff. it wasnt leaking oil so it wasnt like anything major. i would just not prefer to one day see an oil spot under the bike.
ps i can not seem to post any pictures up. everytime i try it says the pixels is too much.
Am thinking width (horizontal) is limited to 2400 pixels and height (vertical) is limited to 1200 pixels. With overall size limited to 200kb.
Placing mouse pointer on the pic (without clicking) might show the size info.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Last edit: 22 Mar 2010 11:49 by Patton.
Please Log in or Create an account to join the conversation.
- saxjonz
-
- Offline
- User
-

Registered
- KawboyZ
- Posts: 2113
- Thanks: 76
Re: Bad news maybe
22 Mar 2010 09:24
vso resizer free download at download.com set it for the same size it says is max so your pics are nice and large for us to see.
kawasakibikefan wrote:
kawasakibikefan wrote:
good stuff. it wasnt leaking oil so it wasnt like anything major. i would just not prefer to one day see an oil spot under the bike.
ps i can not seem to post any pictures up. everytime i try it says the pixels is too much.
79 LTD B3
80 LTD B4 1075 kit JE Pistons .410 cam grind, Bassani, 31 keihin CR Specials...
1980 Z1R, 2002 ZRX1200, 2003 ZRX1200
80 LTD B4 1075 kit JE Pistons .410 cam grind, Bassani, 31 keihin CR Specials...
1980 Z1R, 2002 ZRX1200, 2003 ZRX1200
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
