Cam timing question

  • moneypit
  • moneypit's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 389
  • Thanks: 35

Cam timing question

30 Mar 2010 17:12
#357267
Put the head back on and after i finished I noticed in the manual that I should have loosened the cam chain tensioner. Timing was dead on 28th pin right where it should be Am I going to have to redo this :( I havent moved any thing just incase Thanks
2-76 kz900
St Paul MN

Please Log in or Create an account to join the conversation.

  • keith1
  • keith1's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1646
  • Thanks: 3

Re: Cam timing question

30 Mar 2010 17:20
#357269
yank it completely and re-check.....save yourself the trouble i went through.......when you pulled that chain up to set cams, you could have misaligned the chain and roller......at the very least with the valve cover off, put a flashlite in there and confirm correct contact with tensioner roller......

Please Log in or Create an account to join the conversation.

  • moneypit
  • moneypit's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 389
  • Thanks: 35

Re: Cam timing question

30 Mar 2010 17:24
#357272
Everything looked good and pulling on the chain I could tell it was on the crank sprocket but I probably should just to be sure son of a &*@%! :angry:
2-76 kz900
St Paul MN

Please Log in or Create an account to join the conversation.

  • keith1
  • keith1's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1646
  • Thanks: 3

Re: Cam timing question

30 Mar 2010 17:44
#357280
a lot cheaper to be sure....been there....my ass still hurts from parts buying.....

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum