A little more progress. W/pics
- fordtruck
-
Topic Author
- Offline
- User
-

Registered
- Posts: 323
- Thanks: 6
A little more progress. W/pics
07 Apr 2010 11:04
I got the top end finished up this morning and the carbs installed. Now I just need to install the exhaust and a few others things. Here's a few pics.
'77 KZ1000-MTC 1075 kit. Stage 1 port
Please Log in or Create an account to join the conversation.
- fordtruck
-
Topic Author
- Offline
- User
-

Registered
- Posts: 323
- Thanks: 6
Please Log in or Create an account to join the conversation.
- fordtruck
-
Topic Author
- Offline
- User
-

Registered
- Posts: 323
- Thanks: 6
Please Log in or Create an account to join the conversation.
- fordtruck
-
Topic Author
- Offline
- User
-

Registered
- Posts: 323
- Thanks: 6
Please Log in or Create an account to join the conversation.
- mark1122
-
- Offline
- User
-

Registered
- Keep twisting it
- Posts: 5297
- Thanks: 109
Re: A little more progress. W/pics
07 Apr 2010 11:16
she's looking great. Great job. doesnt it feel good to start putting it back together again. it wont be long now.
It may be helpfull for u and others, if u continue to repost, withing 1 post. this just makes it easier for us to fallow your project.
when u start a new post each time ,its hard for us to go back and referance the previous topics, and keep in touch with your progress.
Keep up the good work.
It may be helpfull for u and others, if u continue to repost, withing 1 post. this just makes it easier for us to fallow your project.
when u start a new post each time ,its hard for us to go back and referance the previous topics, and keep in touch with your progress.
Keep up the good work.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- keith1
-
- Offline
- User
-

Registered
- Posts: 1646
- Thanks: 3
Re: A little more progress. W/pics
07 Apr 2010 11:17
looking good....you ll be tweaking when ya go to hit starter button....:laugh:
Please Log in or Create an account to join the conversation.
- Iron Duke
-
- Offline
- User
-

Registered
- what are you rebelling against?
- Posts: 336
- Thanks: 0
Re: A little more progress. W/pics
07 Apr 2010 11:57
Outstanding!!!.....Duke
1982 KZ550 LTD C-3
1979 XS1100 F Yamaha
1979 XS1100 F Yamaha
Please Log in or Create an account to join the conversation.
- fordtruck
-
Topic Author
- Offline
- User
-

Registered
- Posts: 323
- Thanks: 6
Re: A little more progress. W/pics
08 Apr 2010 08:40
Mark1122, that's good advice. I will add any aditional posts to this thread.
It does feel great to be putting it back together. My dad has been helping me a bunch on my engine. It seems like ages ago we starting taking it apart. I can't wait to hear it run again!
I probably won't get much, if any, work done on it today. I'm off from work tomorrow, so with a little luck I might get it running.
It does feel great to be putting it back together. My dad has been helping me a bunch on my engine. It seems like ages ago we starting taking it apart. I can't wait to hear it run again!
I probably won't get much, if any, work done on it today. I'm off from work tomorrow, so with a little luck I might get it running.
'77 KZ1000-MTC 1075 kit. Stage 1 port
Please Log in or Create an account to join the conversation.
- sft1662
-
- Offline
- User
-

Registered
- Posts: 130
- Thanks: 0
Re: A little more progress. W/pics
08 Apr 2010 10:02
Looking good! Keep up the good work
1978 KZ650 B2A
Please Log in or Create an account to join the conversation.
- fordtruck
-
Topic Author
- Offline
- User
-

Registered
- Posts: 323
- Thanks: 6
Re: A little more progress. W/pics
08 Apr 2010 22:22
I guess I'll find out tomorrow if it will run. Today I was able to put the air pods on. I also installed the header. Tomorrow I just need to hook up the throttle cables, install the muffler, and set the gas tank on. Wish me luck!
'77 KZ1000-MTC 1075 kit. Stage 1 port
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: A little more progress. W/pics
09 Apr 2010 03:18
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- fordtruck
-
Topic Author
- Offline
- User
-

Registered
- Posts: 323
- Thanks: 6
Re: Major Update! -Re:A little more progress. W/pics
09 Apr 2010 10:09
It's alive!! I finished putting it back together this morning. I then cranked the motor over with the starter until the oil light went out. After cranking a few seconds more, to insure oil was flowing to the top end, I turned the gas on. I was so surprised that it only took about one second of cranking to start!
I let it run for about 10 minutes with a fan blowing on the front of the motor. It runs good and sounds awesome with the new competition baffle. This evening after it's good and cool I will torque the head again. I still have a couple of things that I need to address before I can ride it. The little breather filter I bought won't work because it hits on the air pods. I also need to secure the side covers so they don't blow off.
I want to thank everyone here who gave me advice over the last few months. Especially LarryC, Keith1, OMR, RoyB (for the awesome deal on the carbs), and anyone else that I may have forgotten.
I let it run for about 10 minutes with a fan blowing on the front of the motor. It runs good and sounds awesome with the new competition baffle. This evening after it's good and cool I will torque the head again. I still have a couple of things that I need to address before I can ride it. The little breather filter I bought won't work because it hits on the air pods. I also need to secure the side covers so they don't blow off.
I want to thank everyone here who gave me advice over the last few months. Especially LarryC, Keith1, OMR, RoyB (for the awesome deal on the carbs), and anyone else that I may have forgotten.
'77 KZ1000-MTC 1075 kit. Stage 1 port
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
