80 kz650 exhaust
- kzbobber2
-
Topic Author
- Offline
- User
-

Registered
- 1980 kz650
- Posts: 23
- Thanks: 0
80 kz650 exhaust
08 Apr 2010 17:42
how do you remove the mufflers from the headders are they tacked on or slip off or do i have to cut em
Please Log in or Create an account to join the conversation.
- Bluemeanie
-
- Offline
- User
-

Registered
- Posts: 2516
- Thanks: 15
Re: 80 kz650 exhaust
08 Apr 2010 20:42 - 08 Apr 2010 20:42
Are you talking about a KZ (F1) or an LTD (E1)? On my KZ the inner pipes are permentaly connected to mufflers. Both outer pipes are slip fit with gasket and clamp same as cross over pipe.
1980 KZ650F1, Bought new out the door for $2,162.98!
Last edit: 08 Apr 2010 20:42 by Bluemeanie.
Please Log in or Create an account to join the conversation.
- kzbobber2
-
Topic Author
- Offline
- User
-

Registered
- 1980 kz650
- Posts: 23
- Thanks: 0
Please Log in or Create an account to join the conversation.
- kzbobber2
-
Topic Author
- Offline
- User
-

Registered
- 1980 kz650
- Posts: 23
- Thanks: 0
Please Log in or Create an account to join the conversation.
- Mellvis
-
- Offline
- User
-

Registered
- Posts: 250
- Thanks: 3
Re: 80 kz650 exhaust
09 Apr 2010 13:50
If yours is the stock 4 into 2 it should be the same design as the diagram shown, only the head pipes are crossed. The 650D from 78 and 79 has the same pipes as your 650E. I don't remember if the D and E head pipes all four come loose from the mufflers, or just the outer pipes come loose from the mufflers.
Please Log in or Create an account to join the conversation.
- OKC_Kent
-
- Offline
- User
-

Registered
- Posts: 1719
- Thanks: 21
Re: 80 kz650 exhaust
10 Apr 2010 10:31
The exhaust on my 78 B model looks the same as that diagram. The mufflers are welded on. You will have to cut them off, and any replacement muffler will need to be clamped on the pipe or welded. If you need clamps and muffler adapters check JC Whitney.
Cashion, OK
78 KZ650 B2 85,000+ miles
78 KZ650 B2 85,000+ miles
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: 80 kz650 exhaust
10 Apr 2010 10:40
Why would you want to remove the mufflers? Your bike will run like crap without any backpressure. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: 80 kz650 exhaust
10 Apr 2010 12:05 - 10 Apr 2010 12:06
If existing stock exhaust system is in decent condition, might sell for enough to purchase an aftermarket system deemed more suitable. Or perhaps a trade might be possible.
Good Fortune!
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Last edit: 10 Apr 2010 12:06 by Patton.
Please Log in or Create an account to join the conversation.
- kzbobber2
-
Topic Author
- Offline
- User
-

Registered
- 1980 kz650
- Posts: 23
- Thanks: 0
Re: 80 kz650 exhaust
11 Apr 2010 07:44
it would run fine even without the mufflers,ive seen it done,with a rejet. motors a motor right,just got headers on my race car
Please Log in or Create an account to join the conversation.
- kzbobber2
-
Topic Author
- Offline
- User
-

Registered
- 1980 kz650
- Posts: 23
- Thanks: 0
Please Log in or Create an account to join the conversation.
- kzbobber2
-
Topic Author
- Offline
- User
-

Registered
- 1980 kz650
- Posts: 23
- Thanks: 0
Please Log in or Create an account to join the conversation.
- polkat
-
- Offline
- User
-

Registered
- Posts: 513
- Thanks: 1
Re: 80 kz650 exhaust
11 Apr 2010 18:42
My '82 KZ750-4 is the same setup. I think all the Kawa 4's were that way in that era. Solid to the two inside pipes and removable outer pipes. But why? Did it make it easier to R&R the system?
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
