Cam shafts
- 7879KZ650S
-
Topic Author
- Offline
- User
-

Registered
- Posts: 17
- Thanks: 0
Cam shafts
08 Apr 2010 18:00
Not long ago I bought a pair of Andrews racing cams #10 grind for my 78 650. Does anyone know if I will need new/different valve springs to run these cams?:S
Please Log in or Create an account to join the conversation.
- Injected
-
- Offline
- User
-

Registered
- Posts: 1838
- Thanks: 1284
Re: Cam shafts
09 Apr 2010 06:05
No, they are a drop in cam...
Andrews offered the following grinds for the 650/750 Kawasaki :
#10- 236D .330"L - Bolt in Stock cups & springs 2500RPM+
Andrews offered the following grinds for the 650/750 Kawasaki :
#10- 236D .330"L - Bolt in Stock cups & springs 2500RPM+
1978 KZ650B2 w 1197cc Z1 engine
1977 KZ650B1 w 750cc Spectre engine
1979 KZ650C3 w 831cc Hot Rod engine
1978 KZ650C2 w 762cc DFI project
1977 KZ650C1 stock restoration project
1978 KZ650B2 modified project
1977 KZ650B1 w 750cc Spectre engine
1979 KZ650C3 w 831cc Hot Rod engine
1978 KZ650C2 w 762cc DFI project
1977 KZ650C1 stock restoration project
1978 KZ650B2 modified project
Please Log in or Create an account to join the conversation.
- 7879KZ650S
-
Topic Author
- Offline
- User
-

Registered
- Posts: 17
- Thanks: 0
Please Log in or Create an account to join the conversation.
- 7879KZ650S
-
Topic Author
- Offline
- User
-

Registered
- Posts: 17
- Thanks: 0
Re: Cam shafts
10 Apr 2010 15:06
Would I have to re-jet the carbs? and if so, any suggestions? I would also like to put new exhaust on any one have any recommendations?
Please Log in or Create an account to join the conversation.
- 7879KZ650S
-
Topic Author
- Offline
- User
-

Registered
- Posts: 17
- Thanks: 0
Re: Cam shafts
02 Jun 2010 18:32
I had been kind of scared to put these cams in myself, but in my spare time I have looked the bike and the cams over. Looks like there may not be much to it. Does anyone know the torque specs on the cam journals?
Please Log in or Create an account to join the conversation.
- Nebr_Rex
-
- Offline
- User
-

Registered
- Posts: 1889
- Thanks: 295
Re: Cam shafts
02 Jun 2010 18:40
7879KZ650S wrote:
11 ft. lbs.
time the cams to factory specs.
I had been kind of scared to put these cams in myself, but in my spare time I have looked the bike and the cams over. Looks like there may not be much to it. Does anyone know the torque specs on the cam journals?
11 ft. lbs.
time the cams to factory specs.
2002 ZRX1200R
81 GPz1100
79 KZ1000st daily ride
79 KZ1000mk2 prodject
78 KZ650sr
78 KZ650b
81 KZ750e
80 KZ750ltd
77 KZ400/440 cafe project
76 KZ400/440 Fuel Injected
www.dotheton.com/index.php?threads/dr-je...air-of-kz400s.39120/
.
81 GPz1100
79 KZ1000st daily ride
79 KZ1000mk2 prodject
78 KZ650sr
78 KZ650b
81 KZ750e
80 KZ750ltd
77 KZ400/440 cafe project
76 KZ400/440 Fuel Injected
www.dotheton.com/index.php?threads/dr-je...air-of-kz400s.39120/
.
Please Log in or Create an account to join the conversation.
- 7879KZ650S
-
Topic Author
- Offline
- User
-

Registered
- Posts: 17
- Thanks: 0
Please Log in or Create an account to join the conversation.
- porchev914
-
- Offline
- User
-

Registered
- Whats that? Half of my swingarm is missing?!?!?
- Posts: 2708
- Thanks: 19
Re: Cam shafts
02 Jun 2010 18:52
Yeah, you'll wanna rejet for the cams, if you want all the power available from installing them
Can't help you on the exhaust recommendations though
FRANKEN Z!
1978 KZ1000 A2A with 08'Speed Triple SSSA and '06 GSXR1000 front end
1978 KZ1000 A2A with 08'Speed Triple SSSA and '06 GSXR1000 front end
Please Log in or Create an account to join the conversation.
- larrycavan
-
- User
-

Public
- Thanks: 0
Re: Cam shafts
03 Jun 2010 04:55 - 03 Jun 2010 04:59
7879KZ650S wrote:
Use red loctite on the threads. Make sure you clean the bolts and the cam bolt holes with brake clean and blow them out.
Pick up a bottle of LL5 lifter lube at your local NAPA store and lube the cams and buckets well with it. I always follow break in procedures even with used cams.
Thanks, is there a spec on the cam to sprocket bolts?
Use red loctite on the threads. Make sure you clean the bolts and the cam bolt holes with brake clean and blow them out.
Pick up a bottle of LL5 lifter lube at your local NAPA store and lube the cams and buckets well with it. I always follow break in procedures even with used cams.
Last edit: 03 Jun 2010 04:59 by larrycavan.
Please Log in or Create an account to join the conversation.
- BSKZ650
-
- Offline
- User
-

Registered
- Posts: 2061
- Thanks: 14
Re: Cam shafts
03 Jun 2010 05:35
Nebr_Rex wrote:
dont have my book here, but seems to me it was in inch lbs not ft?
7879KZ650S wrote:I had been kind of scared to put these cams in myself, but in my spare time I have looked the bike and the cams over. Looks like there may not be much to it. Does anyone know the torque specs on the cam journals?
11 ft. lbs.
time the cams to factory specs.
dont have my book here, but seems to me it was in inch lbs not ft?
77 kz650, owned for over 25 years
77 ltd1000, current rider
76 kz900, just waiting
73 z1,, gonna restore this one
piglet, leggero harley davidson
SR, Ride captian, S.E.Texas Patriot Guard Riders.. AKA KawaBob
77 ltd1000, current rider
76 kz900, just waiting
73 z1,, gonna restore this one
piglet, leggero harley davidson
SR, Ride captian, S.E.Texas Patriot Guard Riders.. AKA KawaBob
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Cam shafts
03 Jun 2010 05:40
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- chrispysaki
-
- Offline
- User
-

Registered
- Posts: 150
- Thanks: 0
Re: Cam shafts
03 Jun 2010 08:26
The torque for the sprocket to the cams is 11 ft./lbs.
The torque for the cam shaft caps is 104 in./lbs. (or roughly 9 ft./lbs)
The torque for the cam shaft caps is 104 in./lbs. (or roughly 9 ft./lbs)
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
