Introduction first, question second.
- kimsmith4807
-
Topic Author
- Offline
- User
-

Registered
- Posts: 55
- Thanks: 4
Introduction first, question second.
12 Apr 2010 17:28
Hello all, new to the forum. I Hail from NH and just acquired my first KZ. A 1981 KZ1000 LTD I found on craigslist for little to nothing, (I think). It's a great feeling owning a KZ, finally! I love the exclusiveness of the KZ's. Don't see that in the other makes, (not bashing, just proud to own a KZ). As part of my restoration project I would like the motor returned to oem condition. It has 22K miles on it and has never had the valves looked at. This is even more evident in the hollow tapping/knocking coming from the top end. Looking for reputable engine shops to do the work. Re-use what's still good and replace what's needed, no upgrades and maybe a bead blast for that factory look. Look forward to forum.
1981 KZ1000-K1 LTD
Please Log in or Create an account to join the conversation.
- keith1
-
- Offline
- User
-

Registered
- Posts: 1646
- Thanks: 3
Re: Introduction first, question second.
12 Apr 2010 17:46
good to see you here.....post up some pics..we love pics....
lets start with the basics.....carbs clean? adjust your valves...!!!! lots of info here.......
lets start with the basics.....carbs clean? adjust your valves...!!!! lots of info here.......
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: Introduction first, question second.
12 Apr 2010 17:51
Go with a Hot Tank cleaning, leave the Blast compound for something else other than engine parts, GRIT.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
- kimsmith4807
-
Topic Author
- Offline
- User
-

Registered
- Posts: 55
- Thanks: 4
Re: Introduction first, question second.
12 Apr 2010 17:53
I have the carbs off, might be sending them out for refurb as well, maybe some re-jetting, pods, etc. I think I can fabricate a compression tool at work tomorrow and check the engine tomorrow after work.
1981 KZ1000-K1 LTD
Please Log in or Create an account to join the conversation.
- keith1
-
- Offline
- User
-

Registered
- Posts: 1646
- Thanks: 3
Re: Introduction first, question second.
12 Apr 2010 18:08
kimsmith4807 wrote:
not sure , but you might have bs34's.....pm wickedkz....i bought a set he redid.....good prices and good work....
I have the carbs off, might be sending them out for refurb as well, maybe some re-jetting, pods, etc. I think I can fabricate a compression tool at work tomorrow and check the engine tomorrow after work.
not sure , but you might have bs34's.....pm wickedkz....i bought a set he redid.....good prices and good work....
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
