1977 kz650 will not start
- runningtat
-
Topic Author
- Offline
- User
-

Registered
- Posts: 11
- Thanks: 0
1977 kz650 will not start
16 Apr 2010 19:22 - 16 Apr 2010 20:45
hi all, slight problem here....no spark in spark plugs 1 and 4..no spark in left point...3 and 4 have good spark at the plugs and points
any suggestions.....condenser issue..ignition coil what values should i be looking at with a voltmeter for the condenser and ignition coil..no manual yet!!!!
runningtat
1977 kz 650
nova scotia , canada
any suggestions.....condenser issue..ignition coil what values should i be looking at with a voltmeter for the condenser and ignition coil..no manual yet!!!!
runningtat
1977 kz 650
nova scotia , canada
Last edit: 16 Apr 2010 20:45 by runningtat.
Please Log in or Create an account to join the conversation.
- BSKZ650
-
- Offline
- User
-

Registered
- Posts: 2061
- Thanks: 14
Re: 1977 kz650 will not start
17 Apr 2010 10:37
verify that you have voltage to the coils first, next look at the plug wires, and reset the gap on the points making sure they are clean, prefer new points and condensors
77 kz650, owned for over 25 years
77 ltd1000, current rider
76 kz900, just waiting
73 z1,, gonna restore this one
piglet, leggero harley davidson
SR, Ride captian, S.E.Texas Patriot Guard Riders.. AKA KawaBob
77 ltd1000, current rider
76 kz900, just waiting
73 z1,, gonna restore this one
piglet, leggero harley davidson
SR, Ride captian, S.E.Texas Patriot Guard Riders.. AKA KawaBob
Please Log in or Create an account to join the conversation.
- bill_wilcox100
-
- Offline
- User
-

Registered
- Posts: 1115
- Thanks: 6
Re: 1977 kz650 will not start
17 Apr 2010 12:31
Assuming that you have followed the advice above and checked that the voltage across the Coil(s) input is no less than say 0.5 Vdc of the voltage directly across the battery then try the following:
Swap the two coils. If the symptom follows the coil then be prepared to replace the coil... preferably with a new coil (don't ask).
If the symptom does not follow a coil then it may be a trigger (Points, Condenser) fault. Swap the Points.
If the problem follows the Points be prepared to replace with new Points.
If the symptom does not follow the Points then swap the Condensers... you get the idea from here.
Best of success,
Bill
Swap the two coils. If the symptom follows the coil then be prepared to replace the coil... preferably with a new coil (don't ask).
If the symptom does not follow a coil then it may be a trigger (Points, Condenser) fault. Swap the Points.
If the problem follows the Points be prepared to replace with new Points.
If the symptom does not follow the Points then swap the Condensers... you get the idea from here.
Best of success,
Bill
1977 KZ650-B1 (Stock)
Upgrades:
- Dyna S Electronic Ignition (DS2-2)
- Dyna 3 Ohm Coils (DC1-1)
- Coil Repowering Mod
- Progressive Springs Front & Rear
- Saddlemen Seat Cover
- New Metallic Red Re-Paint & Repro Badges.
Montreal, Canada
Upgrades:
- Dyna S Electronic Ignition (DS2-2)
- Dyna 3 Ohm Coils (DC1-1)
- Coil Repowering Mod
- Progressive Springs Front & Rear
- Saddlemen Seat Cover
- New Metallic Red Re-Paint & Repro Badges.
Montreal, Canada
Please Log in or Create an account to join the conversation.
- runningtat
-
Topic Author
- Offline
- User
-

Registered
- Posts: 11
- Thanks: 0
Re: 1977 kz650 will not start
18 Apr 2010 08:20
thanks for the response. any input on how to set the points ..that is new to me...thanks
runningtat
1977 kz650
nova scotia, canada
runningtat
1977 kz650
nova scotia, canada
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
