I need some exhaust help
- djturnz
-
Topic Author
- Offline
- User
-

Registered
- Posts: 340
- Thanks: 5
I need some exhaust help
20 Apr 2010 17:51
82 KZ750(4) LTD
My exhaust is 4 into 2 with a cross over.
I want to pull my stock mufflers and use internal baffles and then have custom pipes done. I haven't pulled the mufflers yet, but I wanted to look for the baffles now. I used my calipers and measured the OD of the pipe before the muffler as 1.18". I assume that gives me a 1" pipe ID? Is that right? That seems awful tiny.
All the baffles I've seen start at 1.5" and go up.
I assume that someone has pulled their stock pipes, is it really 1.18 OD?
I haven't pulled them yet because I have inspection coming up in a week.
Thanks in advance.
My exhaust is 4 into 2 with a cross over.
I want to pull my stock mufflers and use internal baffles and then have custom pipes done. I haven't pulled the mufflers yet, but I wanted to look for the baffles now. I used my calipers and measured the OD of the pipe before the muffler as 1.18". I assume that gives me a 1" pipe ID? Is that right? That seems awful tiny.
All the baffles I've seen start at 1.5" and go up.
I assume that someone has pulled their stock pipes, is it really 1.18 OD?
I haven't pulled them yet because I have inspection coming up in a week.
Thanks in advance.
1982 KZ750 (4) LTD
Please Log in or Create an account to join the conversation.
- jeffasaki
-
- Offline
- User
-

Registered
- Posts: 996
- Thanks: 44
Re: I need some exhaust help
20 Apr 2010 20:22
Just get rid of that rusty old POS and get a 4 into 1 sounds ands perfomes better
78 Z1R
78 KZ1000
76 KH500 gone
71 HS1B 90
81 GS 1100 gone
80 PE400
02 KLR
Ontario Canada
78 KZ1000
76 KH500 gone
71 HS1B 90
81 GS 1100 gone
80 PE400
02 KLR
Ontario Canada
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: I need some exhaust help
20 Apr 2010 21:16
Before you cut on the stock pipes: if they are in good shape, they are worth a lot of bucks. Restorers are always looking for them.
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
- djturnz
-
Topic Author
- Offline
- User
-

Registered
- Posts: 340
- Thanks: 5
Re: I need some exhaust help
21 Apr 2010 04:00 - 21 Apr 2010 04:06
Cut them off? They look to me clamped on.
And they aren't rusty. The only part thats rusted is the screw and bolts holding the heat shield on that covers where the muffler attaches.
And they aren't rusty. The only part thats rusted is the screw and bolts holding the heat shield on that covers where the muffler attaches.
1982 KZ750 (4) LTD
Last edit: 21 Apr 2010 04:06 by djturnz.
Please Log in or Create an account to join the conversation.
- RaeRae
-
- Offline
- User
-

Registered
- Smart @ss white girl!
- Posts: 98
- Thanks: 0
Re: I need some exhaust help
21 Apr 2010 05:59
bountyhunter wrote:
Then how come I can't get rid of mine?
Guess, I'll have to try selling on ebay? I've had on CL for now....
Before you cut on the stock pipes: if they are in good shape, they are worth a lot of bucks. Restorers are always looking for them.
Then how come I can't get rid of mine?
OWN:
82 KZ550 LTD (work in progress)
81 550 GPz (work in progress)
81 KZ550A (parts bike)
91 750 Honda Nighthawk
WANT:
One in every size and color!
Euharlee, GA by way of Glendale, AZ
82 KZ550 LTD (work in progress)
81 550 GPz (work in progress)
81 KZ550A (parts bike)
91 750 Honda Nighthawk
WANT:
One in every size and color!

Euharlee, GA by way of Glendale, AZ
Please Log in or Create an account to join the conversation.
- JMKZHI
-
- Offline
- Platinum Member
-

Registered
- Posts: 2417
- Thanks: 48
Re: I need some exhaust help
21 Apr 2010 06:43
djturnz wrote:
Someone already cut off the stock mufflers & clamped on those.
Please Log in or Create an account to join the conversation.
- djturnz
-
Topic Author
- Offline
- User
-

Registered
- Posts: 340
- Thanks: 5
Re: I need some exhaust help
21 Apr 2010 07:30
Ok, so these aren't stock? What are the stock ones supposed to look like on the LTD? They are ugly as hell, so I assumed they were factory.
1982 KZ750 (4) LTD
Please Log in or Create an account to join the conversation.
- djturnz
-
Topic Author
- Offline
- User
-

Registered
- Posts: 340
- Thanks: 5
Re: I need some exhaust help
21 Apr 2010 07:46
Assuming the header part is stock, what is the ID of that pipe supposed to be? I need baffles.
What about those Harley Coil baffles?
cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll...ME:X:RTQ:MOTORS:1123
They are 1.75". I could just cut off a couple coils to get down to 1" or whatever it is.
What about those Harley Coil baffles?
cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll...ME:X:RTQ:MOTORS:1123
They are 1.75". I could just cut off a couple coils to get down to 1" or whatever it is.
1982 KZ750 (4) LTD
Please Log in or Create an account to join the conversation.
- JMKZHI
-
- Offline
- Platinum Member
-

Registered
- Posts: 2417
- Thanks: 48
Re: I need some exhaust help
21 Apr 2010 08:19 - 25 Apr 2010 07:10
The photo below is a 1980 KZ750-Ltd w stock mufflers which are the same the later H-models. You could reference the diagrams at Kawasaki.com to see how they're constructed.
You're trying to fit baffles into the pipes where the stock mufflers were cut off?
Why not put the baffles inside the new pipes you plan on installing?
.
You're trying to fit baffles into the pipes where the stock mufflers were cut off?
Why not put the baffles inside the new pipes you plan on installing?
.
Last edit: 25 Apr 2010 07:10 by JMKZHI.
Please Log in or Create an account to join the conversation.
- djturnz
-
Topic Author
- Offline
- User
-

Registered
- Posts: 340
- Thanks: 5
Re: I need some exhaust help
21 Apr 2010 08:51
I could do that, though I think I'd still be in the same boat. A 1" pipe ID. 1.18" OD would allow for maybe a 1.25" OD pipe. I still won't find a 1.18" baffle.
The header pipes are 1.25 I think, so why is it necked down so far? two pipes at 1.25 necked together at 1". That seems odd. Or is this to force the excess gasses through the crossover pipe?
The header pipes are 1.25 I think, so why is it necked down so far? two pipes at 1.25 necked together at 1". That seems odd. Or is this to force the excess gasses through the crossover pipe?
1982 KZ750 (4) LTD
Please Log in or Create an account to join the conversation.
- JMKZHI
-
- Offline
- Platinum Member
-

Registered
- Posts: 2417
- Thanks: 48
Re: I need some exhaust help
21 Apr 2010 10:27
I didn't realize you were going to run teeny tiny pipes all the way. It seems like the easiest thing to do would be to simply find matching pipes & baffles in whatever size, then install that.
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: I need some exhaust help
21 Apr 2010 10:58 - 21 Apr 2010 11:03
djturnz wrote:
Then they are not stock. Somebody already took the hacksaw to them. Those mufflers look like the ones JC Whitney used to sell.Cut them off? They look to me clamped on.
1979 KZ-750 Twin
Last edit: 21 Apr 2010 11:03 by bountyhunter.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
