Solid cam chain adjuster - I am now a believer!!!
- Tyler
-
Topic Author
- Offline
- User
-

Registered
- Posts: 845
- Thanks: 92
Solid cam chain adjuster - I am now a believer!!!
24 Apr 2010 16:10
I was riding last week and my bike started rattling badly. I asssumed it was the cam chain buy the sound of it. I was a few blocks from home and limped back to the garage. I could not determine for sure that the stock adjuster had given up but it had to be the problem. Anyways this morning a box showed up form APE and probelm solved. I spent some serious coin on my engine and I am LUCKY I didn't screw anything up. I used to think, well the OEM part worked fine for 30 years why change it, it looks fine, it works fine now, ah I'll just put it back.... yeah big mistake.
If I knew what I was doing all the time life wouldn't be any fun.
'80 KZ650 E 700cc, dyna ignition and coils, frame up restoration, daily driver
'81 KZ1300 A3 full restoration, custom big bore pistons, 1400cc 6 cylinder super bike
"77 KZ650 B1 - Barn Find, work in progeress
"74 Yamaha DT 400 Enduro
'80 KZ650 E 700cc, dyna ignition and coils, frame up restoration, daily driver
'81 KZ1300 A3 full restoration, custom big bore pistons, 1400cc 6 cylinder super bike
"77 KZ650 B1 - Barn Find, work in progeress
"74 Yamaha DT 400 Enduro
Please Log in or Create an account to join the conversation.
- TeK9iNe
-
- Offline
- User
-

Registered
- What did you do!?!
- Posts: 2436
- Thanks: 28
Re: Solid cam chain adjuster - I am now a believer!!!
24 Apr 2010 16:36
Good to hear. 
Remember to check every couple months, and sooner if new cam chain.
GL.
Remember to check every couple months, and sooner if new cam chain.
GL.
Motorcycle Shop Owner/Operator
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
Please Log in or Create an account to join the conversation.
- APE Jay
-
- User
-

Public
- Thanks: 0
Re: Solid cam chain adjuster - I am now a believer!
24 Apr 2010 17:16
Tyler wrote:
Wish i had a dollar for everytime I have heard this same thing. Come to think of it, I guess I do
I was riding last week and my bike started rattling badly. I asssumed it was the cam chain buy the sound of it. I was a few blocks from home and limped back to the garage. I could not determine for sure that the stock adjuster had given up but it had to be the problem. Anyways this morning a box showed up form APE and probelm solved. I spent some serious coin on my engine and I am LUCKY I didn't screw anything up. I used to think, well the OEM part worked fine for 30 years why change it, it looks fine, it works fine now, ah I'll just put it back.... yeah big mistake.
Please Log in or Create an account to join the conversation.
- otakar
-
- Offline
- User
-

Registered
- Posts: 5069
- Thanks: 29
Re: Solid cam chain adjuster - I am now a believer!
24 Apr 2010 17:41
APE Jay wrote:
More like $50
Tyler wrote:I was riding last week and my bike started rattling badly. I asssumed it was the cam chain buy the sound of it. I was a few blocks from home and limped back to the garage. I could not determine for sure that the stock adjuster had given up but it had to be the problem. Anyways this morning a box showed up form APE and probelm solved. I spent some serious coin on my engine and I am LUCKY I didn't screw anything up. I used to think, well the OEM part worked fine for 30 years why change it, it looks fine, it works fine now, ah I'll just put it back.... yeah big mistake.
Wish i had a dollar for everytime I have heard this same thing. Come to think of it, I guess I do
More like $50
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Please Log in or Create an account to join the conversation.
- APE Jay
-
- User
-

Public
- Thanks: 0
Re: Solid cam chain adjuster - I am now a believer!
24 Apr 2010 18:01
otakar wrote:
The price of two valves, not counting labor
APE Jay wrote:Tyler wrote:I was riding last week and my bike started rattling badly. I asssumed it was the cam chain buy the sound of it. I was a few blocks from home and limped back to the garage. I could not determine for sure that the stock adjuster had given up but it had to be the problem. Anyways this morning a box showed up form APE and probelm solved. I spent some serious coin on my engine and I am LUCKY I didn't screw anything up. I used to think, well the OEM part worked fine for 30 years why change it, it looks fine, it works fine now, ah I'll just put it back.... yeah big mistake.
Wish i had a dollar for everytime I have heard this same thing. Come to think of it, I guess I do
More like $50
The price of two valves, not counting labor
Please Log in or Create an account to join the conversation.
- APE Jay
-
- User
-

Public
- Thanks: 0
Re: Solid cam chain adjuster - I am now a believer!
24 Apr 2010 18:01
otakar wrote:
The price of two valves, not counting labor
APE Jay wrote:Tyler wrote:I was riding last week and my bike started rattling badly. I asssumed it was the cam chain buy the sound of it. I was a few blocks from home and limped back to the garage. I could not determine for sure that the stock adjuster had given up but it had to be the problem. Anyways this morning a box showed up form APE and probelm solved. I spent some serious coin on my engine and I am LUCKY I didn't screw anything up. I used to think, well the OEM part worked fine for 30 years why change it, it looks fine, it works fine now, ah I'll just put it back.... yeah big mistake.
Wish i had a dollar for everytime I have heard this same thing. Come to think of it, I guess I do
More like $50
The price of two valves, not counting labor
Please Log in or Create an account to join the conversation.
- otakar
-
- Offline
- User
-

Registered
- Posts: 5069
- Thanks: 29
Re: Solid cam chain adjuster - I am now a believer!
24 Apr 2010 18:12 - 24 Apr 2010 18:58
APE Jay wrote:
And nowhere even close in the AMOUNT of labor required to replace. About half hour for the tensioner (including removing the carbs to make it simpler to get to) In comparison to a bunch of hours to change the valves. But I guess while you're in there you could replace them with oversize stainless ones, plus don't forget the new valve springs and the new K410 cams. :woohoo: :laugh: Hay Jay you should stop selling those tensioners, they're loosing you money :laugh:
Let's see, valve guides, new oversize valve seats.
I finally replaced mine about two weeks ago after the chain got too loud for comfort. By the way the one for the ZX11 also fits the KZ1300.
otakar wrote:APE Jay wrote:Tyler wrote:I was riding last week and my bike started rattling badly. I asssumed it was the cam chain buy the sound of it. I was a few blocks from home and limped back to the garage. I could not determine for sure that the stock adjuster had given up but it had to be the problem. Anyways this morning a box showed up form APE and probelm solved. I spent some serious coin on my engine and I am LUCKY I didn't screw anything up. I used to think, well the OEM part worked fine for 30 years why change it, it looks fine, it works fine now, ah I'll just put it back.... yeah big mistake.
Wish i had a dollar for everytime I have heard this same thing. Come to think of it, I guess I do
More like $50
The price of two valves, not counting labor
And nowhere even close in the AMOUNT of labor required to replace. About half hour for the tensioner (including removing the carbs to make it simpler to get to) In comparison to a bunch of hours to change the valves. But I guess while you're in there you could replace them with oversize stainless ones, plus don't forget the new valve springs and the new K410 cams. :woohoo: :laugh: Hay Jay you should stop selling those tensioners, they're loosing you money :laugh:
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Last edit: 24 Apr 2010 18:58 by otakar.
Please Log in or Create an account to join the conversation.
- dshelly
-
- Offline
- User
-

Registered
- Posts: 258
- Thanks: 5
Re: Solid cam chain adjuster - I am now a believer!
25 Apr 2010 06:26
Look on ebay they have a cheaper one. (with a gasket!)
Occupation:Machinist 25+ exp.
'77 Kz1000B1
'78 Kz1000A2
'76 Kz900LTD
'77 Kz1000B1
'78 Kz1000A2
'76 Kz900LTD
Please Log in or Create an account to join the conversation.
- otakar
-
- Offline
- User
-

Registered
- Posts: 5069
- Thanks: 29
Re: Solid cam chain adjuster - I am now a believer!
25 Apr 2010 08:00
You must see something the rest of us can't.
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Please Log in or Create an account to join the conversation.
- z1kzonly
-
- Offline
- User
-

Registered
- Sustaining Member
- Posts: 2815
- Thanks: 527
Re: Solid cam chain adjuster - I am now a believer!
25 Apr 2010 08:55
cgi.ebay.com/ebaymotors/Cam-Chain-Tensio...?hash=item414eed8dd1
This guy has some nice parts. He is in Montana.
Of course he must be a machinist.
CNC work? I like the fuel Tee's he sells.
This guy has some nice parts. He is in Montana.
Of course he must be a machinist.
CNC work? I like the fuel Tee's he sells.
Livin in "CheektaVegas, NY
Went thru 25 of these in 40 yrs.
I SOLD OUT! THE KAW BARN IS EMPTY.
More room for The Old Girl, Harley 75 FLH Electra Glide,
Old faithful! Points ign. Bendix Orig. carb.
Starts everytime!
Went thru 25 of these in 40 yrs.
I SOLD OUT! THE KAW BARN IS EMPTY.
More room for The Old Girl, Harley 75 FLH Electra Glide,
Old faithful! Points ign. Bendix Orig. carb.
Starts everytime!
Please Log in or Create an account to join the conversation.
- otakar
-
- Offline
- User
-

Registered
- Posts: 5069
- Thanks: 29
Re: Solid cam chain adjuster - I am now a believer!
25 Apr 2010 09:03
Those ARE very nice for the 73-80 engines. I wish he had more stiles. I will have to keep an eye on his stuff and send him a few questions. Those are almost HALF of the APE tensioner and they are less than half of the ones from ACC.
www.americanclassix.com/kawa_improvements.html
www.americanclassix.com/kawa_improvements.html
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Please Log in or Create an account to join the conversation.
- Splandman
-
- Offline
- User
-

Registered
- Posts: 94
- Thanks: 0
Re: Solid cam chain adjuster - I am now a believer!
26 Apr 2010 05:12
I like is exhaust flanges too.
Current Bikes
1980 KZ1000E
1980 KZ1000E
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
