Time for replacement headers?
- Jodyb17
-
Topic Author
- Offline
- User
-

Registered
- Posts: 81
- Thanks: 0
Time for replacement headers?
25 Apr 2010 16:15
My headers are in rough shape. What do you guys think? Grind off the rust and paint or are these toast?
1977 KZ 650 C
Please Log in or Create an account to join the conversation.
- keith1
-
- Offline
- User
-

Registered
- Posts: 1646
- Thanks: 3
Re: Time for replacement headers?
25 Apr 2010 16:36
if its uniform rust...not flaky.....i would take a shot at painting them with hi-temp black.....i would try to find something to nuetralize what corrosion is left after sanding...its gotta hold up to high heat though....and pb blast those bolts holding them on....i m sure the more experienced in this area will chime in.....good luck...
Please Log in or Create an account to join the conversation.
- hocbj23
-
- User
-

Public
- Thanks: 0
Re: Time for replacement headers?
25 Apr 2010 17:14
Got some nice ceramic paints out today that seem to hold up well IF u get the rust off and prep the pipes. Much cheaper than new ones.bj
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: Time for replacement headers?
25 Apr 2010 17:36
sand blast then powder coat.
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
- havakaw
-
- Offline
- User
-

Registered
- Posts: 193
- Thanks: 26
Re: Time for replacement headers?
26 Apr 2010 15:13
I don't know if it's still out there,but I used a product called "Naval/Navel Jelly" to clean up some rust on some car parts a few years back.It did a good job to get most of the surface rust off.It just brushed on and then washed off.Also,to check for pipe integrity,you can take a pair of Channel Locks and GENTLY squeeze the pipes to see if they easily deform,and to feel for weak spots.If you punch thru,then yeah,it's time for new ones.Sand-blasting may be too heavy a medium and actually put holes in the pipes if you're not careful.
'80 KZ 750 LTD-H
'82 KZ 1100 A-2 Shafty (ex-bagger)
'82 KZ 1100 A-2 Shafty (ex-bagger)
Please Log in or Create an account to join the conversation.
- gane
-
- Offline
- User
-

Registered
- Posts: 706
- Thanks: 1
Re: Time for replacement headers?
26 Apr 2010 15:59
Jody, Experiance is that the biggest prob. with rusted headers is at the bottom, where moisture collects, & contact w/speed bumps et;all cause "flattened" pipes. If this area is still "sound" I'd simply sand as much of the rust off as is feasable, & spray w/ your' choice of hi-temp. (mine's Dupilcolor's ceramic) If cosmeticly intrested, after 8-10 hours of use, re-sand & re-spray, usually after 3-4 repetitions most of the old rust dimples will dissappear as the "old" coats act as "seasoned " primer. If collecor area is weak/or has rusted thru, start shopping, luck G
[img][/img] 1977 KZ1000A1
Please Log in or Create an account to join the conversation.
- Jodyb17
-
Topic Author
- Offline
- User
-

Registered
- Posts: 81
- Thanks: 0
Re: Time for replacement headers?
26 Apr 2010 17:01
Thanks for the advice guys. I will give refinishing them a shot after I check their integrity. I'll try the naval jelly before using a mechanical/abrasive method. I'll be sure to update this post with results.
1977 KZ 650 C
Please Log in or Create an account to join the conversation.
- kimsmith4807
-
- Offline
- User
-

Registered
- Posts: 55
- Thanks: 4
Re: Time for replacement headers?
26 Apr 2010 17:22
Mine too are showing their age (KERKER 4-1). Almost dropped the cash for a new system $$$. Got some direction from some other folks about shops that offer ceramic coating. Did some research and for about $125ish you can get something real nice. They sand blast and then apply the coating. Some companies out there offer up to a 3 year warranty on the coating as well. Do a search in your state and I bet you'll find guys who do ceramic coatings. It seems to be very popular.
1981 KZ1000-K1 LTD
Please Log in or Create an account to join the conversation.
- Jodyb17
-
Topic Author
- Offline
- User
-

Registered
- Posts: 81
- Thanks: 0
Re: Time for replacement headers?
03 Jun 2010 18:04
Well here's how they turned out. Not bad for $30 and some elbow grease.
kzrider.com/index.php?option=com_kunena&...=11&id=363157#373203
kzrider.com/index.php?option=com_kunena&...=11&id=363157#373203
1977 KZ 650 C
Please Log in or Create an account to join the conversation.
- Jodyb17
-
Topic Author
- Offline
- User
-

Registered
- Posts: 81
- Thanks: 0
Please Log in or Create an account to join the conversation.
- riverroad
-
- Offline
- User
-

Registered
- 1980 1000LTD B4
- Posts: 842
- Thanks: 7
Re: Time for replacement headers?
03 Jun 2010 18:31 - 03 Jun 2010 18:33
Looks good! I ran black painted headers for years, and the paint will burn off after a while. But using some aluminum foil and/or pieces of carboard to mask the engine, they ain't hard to touch up every once in a while. VHT is good paint, but I usually opted for cheaper BBQ paint.
Last edit: 03 Jun 2010 18:33 by riverroad.
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: Time for replacement headers?
03 Jun 2010 21:40
The VHT will last longer if you force cure it before running it. I hang the pipes on a coat hanger in the garage and take an industrial heat gun to the pipes inside and out.
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
