Need help with cylinder head
- kzxxx
-
Topic Author
- Offline
- User
-

Registered
- Posts: 2
- Thanks: 0
Need help with cylinder head
29 Apr 2010 10:01
Hi, Im new to the forum and have to ask for some help. I own a 79 kz1000 that is blowing oil thru the #4 cylinder into the headers. I have new pistons, rings, and had a shop due a mild port and clean up on the head for me. All the new pistons have a nice coat of carbon except the #4 which is still shinny and oil coated. Im thinking that the shop cleaned too much up and touched a valve, but if they didn't where should I look next? Thanks for the help.
Please Log in or Create an account to join the conversation.
- kawsakiman
-
- Offline
- User
-

Registered
- Posts: 1246
- Thanks: 6
Re: Need help with cylinder head
29 Apr 2010 10:50
valve seals and guides.
or maybe you have an overlapped oil ring.
real easy to do.
when you did the new pistons and rings were they oversized or stock?
there is a bunch that could have gone wrong.
or maybe you have an overlapped oil ring.
real easy to do.
when you did the new pistons and rings were they oversized or stock?
there is a bunch that could have gone wrong.
someday i will be able to afford my kz habit.
Please Log in or Create an account to join the conversation.
- otakar
-
- Offline
- User
-

Registered
- Posts: 5069
- Thanks: 29
Re: Need help with cylinder head
29 Apr 2010 10:57
Is the engine smoking a lot?
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Please Log in or Create an account to join the conversation.
- hocbj23
-
- User
-

Public
- Thanks: 0
Please Log in or Create an account to join the conversation.
- kzxxx
-
Topic Author
- Offline
- User
-

Registered
- Posts: 2
- Thanks: 0
Re: Need help with cylinder head
30 Apr 2010 06:31
The pistons were stock with a fresh bore of the block. The engine smokes a lot, and # 4 is firing but has a lot of oil going into the header. I think I an going to change the seals and giudes and see what happens. If I determine that the head is damaged, can it be repaired or do I buy a used one and replace it? Thanks for all the help.
Please Log in or Create an account to join the conversation.
- otakar
-
- Offline
- User
-

Registered
- Posts: 5069
- Thanks: 29
Re: Need help with cylinder head
30 Apr 2010 07:02
kzxxx wrote:
I am confused, How do you have stock pistons with a new bore? :huh:
The pistons were stock with a fresh bore of the block. The engine smokes a lot, and # 4 is firing but has a lot of oil going into the header. I think I an going to change the seals and giudes and see what happens. If I determine that the head is damaged, can it be repaired or do I buy a used one and replace it? Thanks for all the help.
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Please Log in or Create an account to join the conversation.
- Schorly
-
- Offline
- User
-

Registered
- Posts: 82
- Thanks: 1
Re: Need help with cylinder head
13 Aug 2010 05:38
otakar wrote:
as you are discussing pistons, etc. could I ask if I would go for oversized piston rings, can I install them on standard size pistons or would I need to have larger pistons as well?
kzxxx wrote:The pistons were stock with a fresh bore of the block. The engine smokes a lot, and # 4 is firing but has a lot of oil going into the header. I think I an going to change the seals and giudes and see what happens. If I determine that the head is damaged, can it be repaired or do I buy a used one and replace it? Thanks for all the help.I am confused, How do you have stock pistons with a new bore? :huh:
as you are discussing pistons, etc. could I ask if I would go for oversized piston rings, can I install them on standard size pistons or would I need to have larger pistons as well?
1982 KZ1000 CSR M
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Need help with cylinder head
13 Aug 2010 05:45
Compression & Leak Down test on #4 will tell you if bent valve, guide/oil seal, bypassing the rings etc....
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Need help with cylinder head
13 Aug 2010 05:45
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- larrycavan
-
- User
-

Public
- Thanks: 0
Re: Need help with cylinder head
13 Aug 2010 06:00
A leak down test isn't going to tell you very much about that problem.
It sounds like an overlapped oil ring. They'll make the engine smoke non stop and even blow oil right out the exhaust pipe in little droplets...
Larry C
It sounds like an overlapped oil ring. They'll make the engine smoke non stop and even blow oil right out the exhaust pipe in little droplets...
Larry C
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: Need help with cylinder head
13 Aug 2010 06:03
Maybe you mean "Honed" or "De glazed", instead or "Bored".
You must use oversize pistons and rings that are for the new bore Size, if Boring has been done.
No you can't put oversize rings on a Stock diameter piston.
If it was re bored, then you should have on a receipt from the machine shop as to the size it was bored out to. I've never had a bore job done with out taking the new oversize pistons to the machinist, unless he was going to supply them. Proper fit of the pistons to bore, and the ring end gap, and "Staggering" the gaps is all covered in a Good quality repair manual. Best to have the Factory Service Manual for your bikes year and model.
A compression test, followed by a leak down test will tell you if a cylinder will hold "Pressure", but if the 3 piece oil rings expander has its ends over lapped instead of butted together, those tests won't show this. Those tests also won't show you If a Valve guide seal is miss-installed.
Who did the assembling of the engine? Someone with a Manual and experience?
You must use oversize pistons and rings that are for the new bore Size, if Boring has been done.
No you can't put oversize rings on a Stock diameter piston.
If it was re bored, then you should have on a receipt from the machine shop as to the size it was bored out to. I've never had a bore job done with out taking the new oversize pistons to the machinist, unless he was going to supply them. Proper fit of the pistons to bore, and the ring end gap, and "Staggering" the gaps is all covered in a Good quality repair manual. Best to have the Factory Service Manual for your bikes year and model.
A compression test, followed by a leak down test will tell you if a cylinder will hold "Pressure", but if the 3 piece oil rings expander has its ends over lapped instead of butted together, those tests won't show this. Those tests also won't show you If a Valve guide seal is miss-installed.
Who did the assembling of the engine? Someone with a Manual and experience?
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
- TeK9iNe
-
- Offline
- User
-

Registered
- What did you do!?!
- Posts: 2436
- Thanks: 28
Re: Need help with cylinder head
13 Aug 2010 06:05
Schorly wrote:
Do not use oversize piston rings. Pistons and rings are designed specifically to be used together and not interchanged.
You want maximum compression right!?!
as you are discussing pistons, etc. could I ask if I would go for oversized piston rings, can I install them on standard size pistons or would I need to have larger pistons as well?
Do not use oversize piston rings. Pistons and rings are designed specifically to be used together and not interchanged.
You want maximum compression right!?!
Motorcycle Shop Owner/Operator
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
