104 Octane gas?
- clipped50
-
Topic Author
- Offline
- User
-

Registered
- Posts: 11
- Thanks: 0
104 Octane gas?
30 Apr 2010 14:03
How bad is it to run in a stock bike and would it keep it from starting after running it for a very short time?
Northwest Arkansas
82 KZ1000 LTD
78 KZ650 SR
82 KZ1000 LTD
78 KZ650 SR
Please Log in or Create an account to join the conversation.
- otakar
-
- Offline
- User
-

Registered
- Posts: 5069
- Thanks: 29
Re: 104 Octane gas?
30 Apr 2010 14:11
Why would you want to. It will not be any benefit to the engine at all. Otherwise it should run with no problem. Sort of like using a $250 bottle of 30 year old wine for cooking.
I used to run 100LL Av Gas in my bike when I used to get it for free but now at$4.64 why should I.
I used to run 100LL Av Gas in my bike when I used to get it for free but now at$4.64 why should I.
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Please Log in or Create an account to join the conversation.
- TeK9iNe
-
- Offline
- User
-

Registered
- What did you do!?!
- Posts: 2436
- Thanks: 28
Re: 104 Octane gas?
30 Apr 2010 15:05
You could end up getting less power out of that high an octane, than you would a regular tank of 87.
Motorcycle Shop Owner/Operator
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
Please Log in or Create an account to join the conversation.
- mark1122
-
- Offline
- User
-

Registered
- Keep twisting it
- Posts: 5297
- Thanks: 109
Re: 104 Octane gas?
30 Apr 2010 15:15 - 30 Apr 2010 15:16
if the bike is not running properly, it is not due to the octane level.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Last edit: 30 Apr 2010 15:16 by mark1122.
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: 104 Octane gas?
30 Apr 2010 17:13
youll end up with motor all carboned up that dont run very well
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- Polar_Bus
-
- Offline
- User
-

Registered
- Posts: 256
- Thanks: 7
Re: 104 Octane gas?
30 Apr 2010 17:24
Race fuel is useless in stock compression engines designed to run on pump fuel. Race fuel does not make more hp, race fuel eliminates the possibility of detonation.
Bikes:
'84 GPz1100
'06 HD Fatboy
'84 GPz1100
'06 HD Fatboy
Please Log in or Create an account to join the conversation.
- clipped50
-
Topic Author
- Offline
- User
-

Registered
- Posts: 11
- Thanks: 0
Re: 104 Octane gas?
01 May 2010 11:19
Thanks guys.. I feel kinda stupid, but I will be ok.. She was running when I got home A week ag. Ordered chain and sprockets and she set for, about 5 days.. After, the chain and sprockets and back together. The test ride.. Well, she won't start.. I liked the detonation theory. New plugs and some new gas and I will go from there.. Thanks again..
Northwest Arkansas
82 KZ1000 LTD
78 KZ650 SR
82 KZ1000 LTD
78 KZ650 SR
Please Log in or Create an account to join the conversation.
- ed spangler
-
- Offline
- User
-

Registered
- Tennessee Z
- Posts: 512
- Thanks: 29
Re: 104 Octane gas?
02 May 2010 06:59
Good Morning Sir
I am curious if you have any advice for me on this:
I am working on my 75 Z1 900, At this time I am "ressurecting" it so to speak, Bike was in terrible shape ,so money being spent now is on functionality. I always have owned bikes with the purpose of riding, don't do show bikes.I am happy to share pics w/ you of what I started with ( as I did w/ Mccoid ) if you want.
Anyway, here in East Tennessee where I live, there are lots & lots of hills, I am wondering what kind of engine mods I could make to improve low end Torque, the goal is to cruise with reduced downshifting . Obviously I know I will have to, just want to reduce it some.
I am an old Drag racer ( Car ) so am familiar with the benefits of high flow / specialty cylinder heads on cars and cams that are designed for low end Torque when used in towing as in trucks etc.
In your experience what are some mods that can be made to my bike to improve low end torque without sacrificng reliability? I.e. are there differnt cylinder heads that I could use, different cams? are Any of these Kawasaki parts as opposed to aftermarket? Can they be sourced used ? ( trying to save $$ )
The engine is bone stock including factory points system ( for now ) except for aftermarket exhaust 4 into 2's & a K& N air filter in stock airbox..Probably have to fatten up the primary jets for the 4 nto 2 exhaust?
Thanks Otto!!
ED Spangler
[email protected]
I am curious if you have any advice for me on this:
I am working on my 75 Z1 900, At this time I am "ressurecting" it so to speak, Bike was in terrible shape ,so money being spent now is on functionality. I always have owned bikes with the purpose of riding, don't do show bikes.I am happy to share pics w/ you of what I started with ( as I did w/ Mccoid ) if you want.
Anyway, here in East Tennessee where I live, there are lots & lots of hills, I am wondering what kind of engine mods I could make to improve low end Torque, the goal is to cruise with reduced downshifting . Obviously I know I will have to, just want to reduce it some.
I am an old Drag racer ( Car ) so am familiar with the benefits of high flow / specialty cylinder heads on cars and cams that are designed for low end Torque when used in towing as in trucks etc.
In your experience what are some mods that can be made to my bike to improve low end torque without sacrificng reliability? I.e. are there differnt cylinder heads that I could use, different cams? are Any of these Kawasaki parts as opposed to aftermarket? Can they be sourced used ? ( trying to save $$ )
The engine is bone stock including factory points system ( for now ) except for aftermarket exhaust 4 into 2's & a K& N air filter in stock airbox..Probably have to fatten up the primary jets for the 4 nto 2 exhaust?
Thanks Otto!!
ED Spangler
[email protected]
Have 1975 Kawasaki Z1-B & 2003 Harley Davidson Heritage Softail Classic
Had Hondas, Harleys and many ,many Z Series Kaws both Std. & LTD's
Had Hondas, Harleys and many ,many Z Series Kaws both Std. & LTD's
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: 104 Octane gas?
02 May 2010 07:11
Decently performing stock Z1 should cruise right up Monteagle in 5th gear without breaking a sweat. 
Good Fortune!
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- loudhvx
-
- Offline
- KZr Legend
-

Registered
- Posts: 10863
- Thanks: 1622
Re: 104 Octane gas?
02 May 2010 08:01
clipped50 wrote:
Is there any chance you had the tank off for any reason while working on the bike? Apparently, on the larger bikes, there is a connector under the tank that gets disconnected sometimes while taking the tank off and on.
Thanks guys.. I feel kinda stupid, but I will be ok.. She was running when I got home A week ag. Ordered chain and sprockets and she set for, about 5 days.. After, the chain and sprockets and back together. The test ride.. Well, she won't start.. I liked the detonation theory. New plugs and some new gas and I will go from there.. Thanks again..
Is there any chance you had the tank off for any reason while working on the bike? Apparently, on the larger bikes, there is a connector under the tank that gets disconnected sometimes while taking the tank off and on.
1981 KZ550 D1 gpz.
Kz550 valve train warning.
Other links.
Kz550 valve train warning.
Other links.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
