The ugly engine that could MAYBE shine
- drshakegonzo
-
Topic Author
- Offline
- User
-

Registered
- Posts: 5
- Thanks: 0
The ugly engine that could MAYBE shine
07 May 2010 19:16
Ok so I have an 30 yr old LTD750 I would really love to try and get the engine looking a lil better and newer. I know this is tedious and a long job but I am determined to do so.
What product or method should I go about. A buddy suggested mothers' wool?? I can't seem to locate any. He said its like a tin of cotton type stuff that u just take small chunks of and apply it in square inches to what u want finished and rub away on it for awhile.
Any other suggestions would be helpful. Like very strong industrial chemical or sumthing that would just work w/ elbow grease and patience. Heres an idea how bad my engine looks. Its basically gray at this point. hahah Shoot away w/ ur advice n suggestions.
What product or method should I go about. A buddy suggested mothers' wool?? I can't seem to locate any. He said its like a tin of cotton type stuff that u just take small chunks of and apply it in square inches to what u want finished and rub away on it for awhile.
Any other suggestions would be helpful. Like very strong industrial chemical or sumthing that would just work w/ elbow grease and patience. Heres an idea how bad my engine looks. Its basically gray at this point. hahah Shoot away w/ ur advice n suggestions.
1980 Kawasaki LTD750
A mans gotta believe in something... I believe I'll have another beer.
A mans gotta believe in something... I believe I'll have another beer.
Please Log in or Create an account to join the conversation.
- 550A2
-
- Offline
- User
-

Registered
- keep the shiny side up
- Posts: 427
- Thanks: 1
Re: The ugly engine that could MAYBE shine
07 May 2010 19:46
wet sand it with 1000 grit sand paper, then 2000 grit sandpaper...and then you can polish it up with a polishing wheel on a die grinder with some compound... it worked for me...also they have chemicals that takes oxidation off metals, but ive never used any..usually some good ol elbow grease will do the trick..
good luck man
good luck man
82 Honda ATC 200-sold
82 Yamaha Virago 920-sold
82 Yamaha YZ250j-kept
80 Suzuki GS 550-sold
82 Kawasaki KZ550 A2-ride all the time
79 Kawasaki KZ650 C-sold
73 Kawasaki Z1 900E-paid $200, sold $6000
86 Yamaha Radian YX600-new project
82 Yamaha Virago 920-sold
82 Yamaha YZ250j-kept
80 Suzuki GS 550-sold
82 Kawasaki KZ550 A2-ride all the time
79 Kawasaki KZ650 C-sold
73 Kawasaki Z1 900E-paid $200, sold $6000
86 Yamaha Radian YX600-new project
Please Log in or Create an account to join the conversation.
- larrycavan
-
- User
-

Public
- Thanks: 0
Re: The ugly engine that could MAYBE shine
07 May 2010 20:02
I'd start with a can of GUNK, a good scrub brush and pressure washer with hot water. Steam would be even better.
If the oxidation doesn't all come off with that, you may consider soda blasting. Then progress to sanding and polishing the covers.
The wool like stuff your buddy told you about is called NEVER DULL. It's a good cleaning / polishing product but there are better products for the ultimate final polishing finish. Mother's cream is one.
Most truch stops have good aluminum polish.
Lots of stuff out there but you have to start at the start and work your way to the brilliant finish.
If the oxidation doesn't all come off with that, you may consider soda blasting. Then progress to sanding and polishing the covers.
The wool like stuff your buddy told you about is called NEVER DULL. It's a good cleaning / polishing product but there are better products for the ultimate final polishing finish. Mother's cream is one.
Most truch stops have good aluminum polish.
Lots of stuff out there but you have to start at the start and work your way to the brilliant finish.
Please Log in or Create an account to join the conversation.
- MFolks
-
- Offline
- User
-

Registered
- Posts: 6650
- Thanks: 541
Re: The ugly engine that could MAYBE shine
07 May 2010 21:39
When it's ready to polish, try this website:
www.microfiber-products-online.com/mopobaandmop.html
www.microfiber-products-online.com/mopobaandmop.html
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: The ugly engine that could MAYBE shine
07 May 2010 22:10 - 07 May 2010 22:11
Check out Kawickrice's before and after pictures in this thread about soda blasting. 
Click here > Engine Soda Blasted
Good Fortune!
Click here > Engine Soda Blasted
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Last edit: 07 May 2010 22:11 by Patton.
Please Log in or Create an account to join the conversation.
- illinilloyd
-
- Offline
- User
-

Registered
- Posts: 2
- Thanks: 0
Re: The ugly engine that could MAYBE shine
08 May 2010 01:07
I swear by Gunk Foamy Engine Cleaner. That stuff worked miracles on the 20 years or so of garage crud on my motorcycle. For the shiny parts I'd suggest polishing compound after using some super fine steel wool. That'll make the covers nice and bright. Hope that helps!
Side note: new member to the site. It's great to see the KZ love in this place.
Side note: new member to the site. It's great to see the KZ love in this place.
1981 KZ 550 LTD [First bike--love it to death] -
kzrider.com/index.php?option=com_joomgal...0&Itemid=117#joomimg
Please Log in or Create an account to join the conversation.
- ndfez
-
- Offline
- User
-

Registered
- Posts: 55
- Thanks: 0
Re: The ugly engine that could MAYBE shine
08 May 2010 04:16
Home made soda blasting gun,check out the topic on this web page called Budget Soda Blasting amazing results.
Please Log in or Create an account to join the conversation.
- Kawickrice
-
- Offline
- User
-

Registered
- After Monday & Tuesday, even the calendar says WTF
- Posts: 2469
- Thanks: 20
Re: The ugly engine that could MAYBE shine
08 May 2010 05:38
That ugly motor will shine right up with alot of elbow grease and some time invested. It will be worth doing once its all done you will be amazed.
73 Kawasaki Z1
07 HD CVO Ultra Classic
82 Suzuki GS 1100
74 Yamaha RD 350 (My two stroke toy)
77 Kawasaki KZ 650B-1 (My putt around bike)
80 Indian Moped (My American Iron)
1
Long Gone
75 Suzuki GT550
74 GT 380
79 RD 400 Daytona Special
72 Honda CL 175
74 Honda QA 50
Tampa FL
07 HD CVO Ultra Classic
82 Suzuki GS 1100
74 Yamaha RD 350 (My two stroke toy)
77 Kawasaki KZ 650B-1 (My putt around bike)
80 Indian Moped (My American Iron)
1
Long Gone
75 Suzuki GT550
74 GT 380
79 RD 400 Daytona Special
72 Honda CL 175
74 Honda QA 50
Tampa FL
Please Log in or Create an account to join the conversation.
- otakar
-
- Offline
- User
-

Registered
- Posts: 5069
- Thanks: 29
Re: The ugly engine that could MAYBE shine
08 May 2010 06:54
As mentioned before. I would definitely start by pressure washing it and than soda blasting. There are some "Chemical" aluminum cleaners sold for cleaning aluminum wheels, but I would be VERY very careful of those. They can cause more damage than good. For soda blasting you can use both Sodium Carbonate Or Sodium Bicarbonate. The god part about sodium Carbonate is that it will not give off CO2 when heated. It is also called Washing Soda or Soda Ash.
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Please Log in or Create an account to join the conversation.
- drshakegonzo
-
Topic Author
- Offline
- User
-

Registered
- Posts: 5
- Thanks: 0
Re: The ugly engine that could MAYBE shine
08 May 2010 12:50
Thanks for all the advice and replies ALL!
I was shopping before I had a chance to look at the replies and found the NEVER DULL but ended up buying sum MOTHERS mag/alum polish. I def will look into the soda blasting. For now however I think I'll just crack a beer, sand and spend sum time polishing it. Thanks for all the help. I def know where I can go with this now. My bro in law has a pressure washer but the gun is broke. I need to buy him a new one tho to clean the oil stains off his driveway from an oil leak I had earlier. LOL Everythings running good now so off to the tedious cosmetic chores for this engine. Thanks again. RIDE OR DIE!
I was shopping before I had a chance to look at the replies and found the NEVER DULL but ended up buying sum MOTHERS mag/alum polish. I def will look into the soda blasting. For now however I think I'll just crack a beer, sand and spend sum time polishing it. Thanks for all the help. I def know where I can go with this now. My bro in law has a pressure washer but the gun is broke. I need to buy him a new one tho to clean the oil stains off his driveway from an oil leak I had earlier. LOL Everythings running good now so off to the tedious cosmetic chores for this engine. Thanks again. RIDE OR DIE!
1980 Kawasaki LTD750
A mans gotta believe in something... I believe I'll have another beer.
A mans gotta believe in something... I believe I'll have another beer.
Please Log in or Create an account to join the conversation.
- drshakegonzo
-
Topic Author
- Offline
- User
-

Registered
- Posts: 5
- Thanks: 0
Re: The ugly engine that could MAYBE shine
08 May 2010 12:56
WOW KAWICKRICE that soda blasting technique is crazy cool! Nice before n after pics. Very cool will def keep in mind depending how my elbow feels after a day. haha Seems pretty efficient. Thanks
1980 Kawasaki LTD750
A mans gotta believe in something... I believe I'll have another beer.
A mans gotta believe in something... I believe I'll have another beer.
Please Log in or Create an account to join the conversation.
- otakar
-
- Offline
- User
-

Registered
- Posts: 5069
- Thanks: 29
Re: The ugly engine that could MAYBE shine
08 May 2010 14:39
drshakegonzo wrote:
You better get yourself a full case not just "A" Beer. Otherwise you will be getting of that stool a lot of times before you're done. :lol:
Thanks for all the advice and replies ALL!
I def will look into the soda blasting. For now however I think I'll just crack a beer, sand and spend sum time polishing it.
You better get yourself a full case not just "A" Beer. Otherwise you will be getting of that stool a lot of times before you're done. :lol:
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
